WIW 69 lwb leaf spring truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Critter · 06-05-2008, 11:56 PM

I am in the process of getting a 69 long wheelbase 2wd parts truck. It has original leaf springs in the back and I haven’t seen all that many of these trucks around. I didn’t know if the frame or rolling chassis is worth anything more than a regular coil spring truck or if it is just worth its weight in scrap. In addition, it has a decent set of original wheels/hubcaps (in the cab) and a th400 with non-tilt column that I might also sell. Any idea what I can get for this stuff around Texas? Thanks!

**nightmare** · 06-06-2008, 11:57 AM

hmm, not sure, but I may be interested in the frame itself, minus all running gear.

Critter · 06-06-2008, 05:46 PM

Quote:

Originally Posted by nightmare

hmm, not sure, but I may be interested in the frame itself, minus all running gear.

I plan on keeping the engine, trans, and rear axle so when it comes time to get rid of it there will probably be just a frame and maybe the front suspension and rear leaf springs. Are the leaf spring frames hard to come by/desireable in any way??? I personally haven't seen that many of them but that doesn't mean much.

Would I be insane to try to get $150 dollars for it?

Critter · 06-07-2008, 10:19 PM

So is it basically scrap...?

TTT....

67Mach1 · 06-07-2008, 11:03 PM

Quote:

Originally Posted by Critter

So is it basically scrap...?

TTT....

you could make a great trailer out of the spring frame and bed. Some have said that the leaf spring rear ends can be loaded down with an amazing amount of weight, overloaded, and still perform very well.

The trailer route is what I think I.m going to do with the 67 GMC I have.

**jerry moss** · 06-08-2008, 10:49 AM

value wise, i think $150.00 isn't out of line to the right person. finding the right person might not be easy though. i agree, make a trailer out of it, i built mine from a 72 GMC longbed with 3/4 ton springs and a gutted HO52.

bandit37388 · 06-08-2008, 12:35 PM

Remember the more of them you destroy the less there is later when needed

**nightmare** · 06-09-2008, 08:26 AM

Quote:

Originally Posted by Critter

I plan on keeping the engine, trans, and rear axle so when it comes time to get rid of it there will probably be just a frame and maybe the front suspension and rear leaf springs. Are the leaf spring frames hard to come by/desireable in any way??? I personally haven't seen that many of them but that doesn't mean much.

Would I be insane to try to get $150 dollars for it?

Quote:

Originally Posted by Critter

So is it basically scrap...?

TTT....

Sorry, I don't have internet at the house just yet. AT&T messed up again. Anyhow, I am interested in the frame only. I wouldn't need the front suspension, the leaf springs, rear axle, engine, or tranny, just the bare frame. I'd be willing to give $75 for the bare frame, but that would be up to you. Would you happen to have the title for the frame, and/or the VIN plate that goes with it?

06-05-2008, 11:56 PM	#1
Critter Future TOTM Winner Join Date: Aug 2006 Location: Bulverde, TX Posts: 2,692	WIW 69 lwb leaf spring truck I am in the process of getting a 69 long wheelbase 2wd parts truck. It has original leaf springs in the back and I haven’t seen all that many of these trucks around. I didn’t know if the frame or rolling chassis is worth anything more than a regular coil spring truck or if it is just worth its weight in scrap. In addition, it has a decent set of original wheels/hubcaps (in the cab) and a th400 with non-tilt column that I might also sell. Any idea what I can get for this stuff around Texas? Thanks! Attached Images __________________ 72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces) 72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts 2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver Check it out www.lsdyno.com

06-07-2008, 10:19 PM	#4
Critter Future TOTM Winner Join Date: Aug 2006 Location: Bulverde, TX Posts: 2,692	Re: WIW 69 lwb leaf spring truck So is it basically scrap...? TTT.... __________________ 72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces) 72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts 2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver Check it out www.lsdyno.com

06-08-2008, 10:49 AM	#6
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,873	Re: WIW 69 lwb leaf spring truck value wise, i think $150.00 isn't out of line to the right person. finding the right person might not be easy though. i agree, make a trailer out of it, i built mine from a 72 GMC longbed with 3/4 ton springs and a gutted HO52. Attached Images __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

06-08-2008, 12:35 PM	#7
bandit37388 Registered User Join Date: Dec 2007 Location: tullahoma, tn Posts: 23	Re: WIW 69 lwb leaf spring truck Remember the more of them you destroy the less there is later when needed

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.