![]() |
![]() |
#1 |
Registered User
Join Date: Feb 2008
Location: Johnson City Tennessee
Posts: 1,191
|
can this be done
here is a quote that jerry moss sent me and i want to know if this can be done?
"if you can find a vacuum tin without a tach, you can have tha tach hole punched. i sent a few of mine out a few years back when i put together some tach/vacuum/speedwarning clusters. i don't remember which company did the work but one thing i do remember, it took a couple of months to get the tins back. i punched one of my own many years ago but it took a few tries to get it right, back then i had so many clusters laying around i could afford to screw up a few. i'm sure someone on the board could tell you which company punches the tach hole, it's one of the large truck vendors. getting old really sucks--first thing to go is the mind and i can't remember what goes next. lol." jerry moss
__________________
Greater love hath no man than to lay down his life for a friend. Members i Have met Earl Slick68 1969 Stepside Build thread http://67-72chevytrucks.com/vboard/s...=1#post4253546 ![]() ![]() |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
|
Re: can this be done
Based on Jerry Moss's reputation, if he said it can be done then I would certainly believe him.
Looking at the tins, it sure seems possible for someone with the experience in sheet metal but I have never attempted it. Jim
__________________
1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Feb 2008
Location: Johnson City Tennessee
Posts: 1,191
|
Re: can this be done
does anyone know if this can be done?
__________________
Greater love hath no man than to lay down his life for a friend. Members i Have met Earl Slick68 1969 Stepside Build thread http://67-72chevytrucks.com/vboard/s...=1#post4253546 ![]() ![]() |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Aug 2006
Location: Bakersfield,CA
Posts: 7,893
|
Re: can this be done
you could probly drill it out with a metal hole drill
__________________
-steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME |
![]() |
![]() |
![]() |
#5 |
Special Order
![]() ![]() Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,858
|
Re: can this be done
I believe the back tins play a part in the backlight.I guess you do a custom look.But,I`ve always been told you need the tins.At least to look factory.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Feb 2008
Location: Johnson City Tennessee
Posts: 1,191
|
Re: can this be done
oh ok well i will try and find a tin
__________________
Greater love hath no man than to lay down his life for a friend. Members i Have met Earl Slick68 1969 Stepside Build thread http://67-72chevytrucks.com/vboard/s...=1#post4253546 ![]() ![]() |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Feb 2002
Location: Vacaville, CA
Posts: 2,746
|
Re: can this be done
Don't know if this will help any its a Camero tach:
http://67-72chevytrucks.com/vboard/s...d.php?t=250683
__________________
![]() ![]() 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI |
![]() |
![]() |
![]() |
#8 |
Roadtrip!
![]() Join Date: Feb 2003
Location: Grand Rapids MN
Posts: 13,737
|
Re: can this be done
I was dealing with someone in cali. (Maybe at brothers) awhile back about having this done. He said it would be no problem as the had all the dies and punches made. At that time i think it was 8 or 9 bucks a punch and they had to be punched 3 times to be correct. I never followed through with it and this was a couple of years ago. So yes, it can be done.
__________________
67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto |
![]() |
![]() |
![]() |
#9 |
www.infantimachine.com
Join Date: May 2007
Location: Delta,BC Canada
Posts: 311
|
Re: can this be done
I see how the opening has a flange ,not just a hole.Is this something a few of us would be intrested in ?May look into making a die if there is enough intrest.
|
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Feb 2008
Location: Johnson City Tennessee
Posts: 1,191
|
Re: can this be done
yea it would be cheeper than buying a vac tach conversion kit
__________________
Greater love hath no man than to lay down his life for a friend. Members i Have met Earl Slick68 1969 Stepside Build thread http://67-72chevytrucks.com/vboard/s...=1#post4253546 ![]() ![]() |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|