|
06-15-2008, 05:30 PM
|
#1 |
|
Account Suspended
 
Join Date: Jul 2007
Location: Wichita KS
Posts: 1,599
|
Info Needed!!
Alright I have been talked into going with the 454/400 conversion on my 67 SWB instead of the 350/350 combo when I change it over form a 292. I have everything for the 350 swap any of that going to be able to be used? Anyone have a goof FAQ on this with a narrower 67 frame. Basically looking for a Guide for idiots version. One other dumb question can a TH350 handle a 400+ hp BB? Thanks for all the help just have to start getting ready to go a whole new direction.
|
|
|
|
06-15-2008, 06:59 PM
|
#2 |
|
Registered User
Join Date: Dec 2007
Location: Santa Maria, Ca.
Posts: 57
|
Re: Info Needed!!
The th350 can handle over 400HP, but I would put good parts in it, use a higher stall torque converter, and use an external tranny cooler. The th400 is a stronger tranny, but it also robs more power. You probably already know, but your front springs are probably too soft for big block (if they are stock).
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
