What did you get done? 06/08 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

los-lowrider · 06-09-2008, 02:18 PM

And my truck looks the way I want it now.

**Captkaos** · 06-09-2008, 03:35 PM

Friday: went to mod the LS Thorley headers and found that once I got all the required parts in place they wouldn't work without a complete redesign.

Saturday: Reassembled the front seat on the crewcab and unbolted the rear. Was too hot to recover it so I just enjoyed the day with Jamie and Elizabeth

cowstick · 06-09-2008, 04:19 PM

I built a kegerator again so thats two now and some storms took out five trees so got to buy a new chainsaw ohhhh yea and found out how much i can fit in to the back of the 86 turns out about 1500 lbs

76PasoGMC · 06-09-2008, 06:27 PM

Well Friday I tore down my donor 76 long-bed to the frame. I also sold the rolling frame to a guy. He got the motor, trans, and rear end. They will be going in his Sand Drag K5 Blazer. My buddy and I started at 0900 and the guy picked it up at 4:30. MAN that was allot of work. I now have a PERFECT cab with no rust whatsoever. Now all I have to do is cut the floor out to make room for the 4spd and transfer case.

Other than that just buying paint and supplies to get the new cab done.

Oh yeah I also played with my new 4 month old son all day Sunday. We watched the formula 1 race and also the Cup race from Pocono. He LOVES the sound of the cars and the bright colors really keep his attention.

manimal · 06-09-2008, 07:08 PM

Saturday went to pick a part found.....NOTHING! Then went to a family BBQ.
Sunday I converted my '75 K10 to hydroboost brakes and smoked a pork shoulder from 7:00am to 7:00pm for pulled pork sandwiches!YUMMY!
-Lance

Square84 · 06-09-2008, 07:31 PM

pulled the front end off of a 84 resto job im doing

PhilaTruck · 06-09-2008, 09:11 PM

Quote:

Originally Posted by N2TRUX

Don't be to sympathetic of my plight, I will be relaxing (recovering) at the La Cantera Resort and enjoying the finest Tex-Mex food while dining on the river boat of Casa Rio.

That's rough. Good luck with that.

When it got too hot to continue laying brick on my patio and after I recovered, I started painting my headers and masked off the flat black border on the tailgate chrome.

-Todd

sqrbdy · 06-09-2008, 10:58 PM

Quote:

Originally Posted by 454HO

Howdy from Beijing!

Friday we went to Tianamen Square, Saturday was the Forbidden City to see the Emporer's Palace, Sunday we did some shopping and today we went to The Great Wall. Nothing truck related unless you count breathing endless exhaust fumes....

What exactly are you doing in China? Vacation?

sqrbdy · 06-09-2008, 11:00 PM

I worked my tail off. We moved from Beaumont, Tx to Spring, Tx. Believe it or not 3 trips with a 26ft Uhaul and 3 trips with a 17ft Uhaul. Boy I was glad to go back to work today!

boxrodz · 06-11-2008, 01:20 AM

Like some of the others here, I went to show event - the Goodguys. Actually it was last weekend, but I got a few shots. I ended up talking to the business owner and builder of the Chevelle... very nice gentleman from St. Louis, MO.

The Duece was quite a rod... 'Two-tone paint treatment (gloss and flat black combo). I've been wanting to see such a combo. The motivation was also cool driving the massive 22" wide MTs. The interior was unique as well.

boxrodz · 06-11-2008, 01:25 AM

A few more shots from the Goodguys event:

boxrodz · 06-11-2008, 01:45 AM

Oh, and this weekend I used my truck to pick up a new set of wheels. Originally, it was to replace my commuter. But, it may be relegated to road cruising. I guess I'm now committed to some long distance rides this summer. I gotta swap out a few things first...

BLE 'BURBAN · 06-11-2008, 04:34 AM

Moved my vapor cannister from the D/S fender to the core support so I could get my D/S battery tray installed and a second Exide Orbital battery mounted in it. Battery cables to be installed at a later date. It's there just to keep it out of the way for now.

79Silv4x4 · 06-11-2008, 08:07 AM

Quote:

Originally Posted by BLE 'BURBAN

Moved my vapor cannister from the D/S fender to the core support so I could get my D/S battery tray installed and a second Exide Orbital battery mounted in it. Battery cables to be installed at a later date. It's there just to keep it out of the way for now.

Is the tray still available from the dealer?

BLE 'BURBAN · 06-12-2008, 10:55 AM

Quote:

Originally Posted by 79Silv4x4

Is the tray still available from the dealer?

To be honest I don't know (YET) I just pulled the one I had outta my old '81 crew cab that I'm scrapping out and bolted it into the '90 burb

79Silv4x4 · 06-12-2008, 01:29 PM

Quote:

Originally Posted by BLE 'BURBAN

To be honest I don't know (YET) I just pulled the one I had outta my old '81 crew cab that I'm scrapping out and bolted it into the '90 burb

Well, go get that parts job already so I can be the first board member to benefit from you

.

BLE 'BURBAN · 06-12-2008, 03:24 PM

D/s Battery Tray For '81 - '91 Blazer, Crew Cab, Suburban And '81 - '87 Regular Cab Trucks Is Still Available From The Dealership. Part # Is 15616327

aggie91 · 06-12-2008, 05:09 PM

I know that this weekend is almost here, but last weekend was spent at a Family Reunion on my Wife's side. Lucky for me her uncle is a hot rodder. Sunday was spent going to church and then working on the yard. No truck stuff this time...

By the way, N2TRUX, I don't like you anymore...

I used to live in SA and really miss the food at Casa Rio. That is the first place we go eat at when ever we go back...I think that I got to check out that resort. That looks awsome. Hope you and your family enjoyed it!

79Silv4x4 · 06-12-2008, 10:14 PM

Quote:

Originally Posted by BLE 'BURBAN

D/s Battery Tray For '81 - '91 Blazer, Crew Cab, Suburban And '81 - '87 Regular Cab Trucks Is Still Available From The Dealership. Part # Is 15616327

Dang, that was fast. Many thanks! Did you get the job?

**N2TRUX** · 06-12-2008, 11:55 PM

Quote:

Originally Posted by aggie91

...

By the way, N2TRUX, I don't like you anymore...

I used to live in SA and really miss the food at Casa Rio. That is the first place we go eat at when ever we go back...I think that I got to check out that resort. That looks awsome. Hope you and your family enjoyed it!

It was awesome. The wind came up and gave us a break from the heat. The food was great and the company was even better.

It may have been my daughters birthday, but I got a lot of pleasure out of it too.

La Cantera is one of those places that you just have to experience.

454HO · 06-16-2008, 11:49 AM

Quote:

Originally Posted by sqrbdy

What exactly are you doing in China? Vacation?

My wife is Chinese. We came to meet some of her family and do some sightseeing. This is actually my forth trip here, the first three were business. I am finally getting to see something besides the inside of a factory. Two more days and then we leave for a week in Tokyo.

BLE 'BURBAN · 06-18-2008, 01:49 AM

Quote:

Originally Posted by 79Silv4x4

Dang, that was fast. Many thanks! Did you get the job?

Had the interview yesterday Will be giving my 2 weeks notice tomorrow.

79Silv4x4 · 06-18-2008, 09:02 PM

Quote:

Originally Posted by BLE 'BURBAN

Had the interview yesterday Will be giving my 2 weeks notice tomorrow.

Congrats from a former GM parts guy

.

06-09-2008, 02:18 PM	#26
los-lowrider Registered User Join Date: Feb 2005 Location: Germany, Krefeld Posts: 180	Re: What did you get done? 06/08 And my truck looks the way I want it now. Attached Images __________________ Best Regards from Germany! *www.los-lowrider.com*

06-09-2008, 03:35 PM	#27
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: What did you get done? 06/08 Friday: went to mod the LS Thorley headers and found that once I got all the required parts in place they wouldn't work without a complete redesign. Saturday: Reassembled the front seat on the crewcab and unbolted the rear. Was too hot to recover it so I just enjoyed the day with Jamie and Elizabeth __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

06-09-2008, 04:19 PM	#28
cowstick Registered User Join Date: Mar 2008 Location: Minneapolis Mn Posts: 16	Re: What did you get done? 06/08 I built a kegerator again so thats two now and some storms took out five trees so got to buy a new chainsaw ohhhh yea and found out how much i can fit in to the back of the 86 turns out about 1500 lbs __________________ METAL 4 LIFE SDMF

06-09-2008, 06:27 PM	#29
76PasoGMC Registered User Join Date: Mar 2008 Location: Paso Robles, CA Posts: 43	Re: What did you get done? 06/08 Well Friday I tore down my donor 76 long-bed to the frame. I also sold the rolling frame to a guy. He got the motor, trans, and rear end. They will be going in his Sand Drag K5 Blazer. My buddy and I started at 0900 and the guy picked it up at 4:30. MAN that was allot of work. I now have a PERFECT cab with no rust whatsoever. Now all I have to do is cut the floor out to make room for the 4spd and transfer case. Other than that just buying paint and supplies to get the new cab done. Oh yeah I also played with my new 4 month old son all day Sunday. We watched the formula 1 race and also the Cup race from Pocono. He LOVES the sound of the cars and the bright colors really keep his attention.

06-09-2008, 07:08 PM	#30
manimal Registered User Join Date: Oct 2006 Location: Southern Kalifornia Posts: 3,066	Re: What did you get done? 06/08 Saturday went to pick a part found.....NOTHING! Then went to a family BBQ. Sunday I converted my '75 K10 to hydroboost brakes and smoked a pork shoulder from 7:00am to 7:00pm for pulled pork sandwiches!YUMMY! -Lance __________________ ------------------------------------------------------ -Lance 2000 Chevy C2500, 5.7, 4L80e 1999 Suburban K2500, 7.4, 4L80e 1980 Camaro..son's car...PROJECT

06-09-2008, 07:31 PM	#31
Square84 I don't think these pills work Join Date: Apr 2008 Location: burkburnett,Tx Posts: 626	Re: What did you get done? 06/08 pulled the front end off of a 84 resto job im doing __________________ SQUARE84 90 SUBURBAN

06-09-2008, 11:00 PM	#34
sqrbdy Registered User Join Date: Mar 2008 Location: Spring, Texas Posts: 207	Re: What did you get done? 06/08 I worked my tail off. We moved from Beaumont, Tx to Spring, Tx. Believe it or not 3 trips with a 26ft Uhaul and 3 trips with a 17ft Uhaul. Boy I was glad to go back to work today! __________________ Ain't Nobody Like a Square Body sqrbdy myspace

06-11-2008, 01:20 AM	#35
boxrodz Until Seventy Times Seven Join Date: Feb 2005 Location: Rocky Mountain Front Range Posts: 1,301	Re: What did you get done? 06/08 Like some of the others here, I went to show event - the Goodguys. Actually it was last weekend, but I got a few shots. I ended up talking to the business owner and builder of the Chevelle... very nice gentleman from St. Louis, MO. The Duece was quite a rod... 'Two-tone paint treatment (gloss and flat black combo). I've been wanting to see such a combo. The motivation was also cool driving the massive 22" wide MTs. The interior was unique as well. Attached Images __________________ boxRODz 1983 C10 SWB Fleetside When two halves is gone, there's nuthin left. Two nothings is nuthin. That's mathematics son. You can argue with me but you can't argue with figures. Two half nothings is a whole nuthin... Last edited by boxrodz; 06-11-2008 at 01:37 AM.

06-11-2008, 01:25 AM	#36
boxrodz Until Seventy Times Seven Join Date: Feb 2005 Location: Rocky Mountain Front Range Posts: 1,301	Re: What did you get done? 06/08 A few more shots from the Goodguys event: Attached Images __________________ boxRODz 1983 C10 SWB Fleetside When two halves is gone, there's nuthin left. Two nothings is nuthin. That's mathematics son. You can argue with me but you can't argue with figures. Two half nothings is a whole nuthin... Last edited by boxrodz; 06-11-2008 at 01:30 AM.

06-11-2008, 01:45 AM	#37
boxrodz Until Seventy Times Seven Join Date: Feb 2005 Location: Rocky Mountain Front Range Posts: 1,301	Re: What did you get done? 06/08 Oh, and this weekend I used my truck to pick up a new set of wheels. Originally, it was to replace my commuter. But, it may be relegated to road cruising. I guess I'm now committed to some long distance rides this summer. I gotta swap out a few things first... Attached Images __________________ boxRODz 1983 C10 SWB Fleetside When two halves is gone, there's nuthin left. Two nothings is nuthin. That's mathematics son. You can argue with me but you can't argue with figures. Two half nothings is a whole nuthin...

06-11-2008, 04:34 AM	#38
BLE 'BURBAN In the Forgotten far North. Join Date: Jul 2007 Location: Anchorage, Alaska Posts: 2,627	Re: What did you get done? 06/08 Moved my vapor cannister from the D/S fender to the core support so I could get my D/S battery tray installed and a second Exide Orbital battery mounted in it. Battery cables to be installed at a later date. It's there just to keep it out of the way for now. __________________ 1987 R3500 CREW CAB DUALLY (BIG RED)Acquired 06/12/2015 1990 chevy suburban V2500 5.7L My cluster Mods-Nov 2007 overhead console Stereo install Round 2 Aug 2009 Heated/turn signal mirror upgrade

06-12-2008, 03:24 PM	#42
BLE 'BURBAN In the Forgotten far North. Join Date: Jul 2007 Location: Anchorage, Alaska Posts: 2,627	Re: What did you get done? 06/08 D/s Battery Tray For '81 - '91 Blazer, Crew Cab, Suburban And '81 - '87 Regular Cab Trucks Is Still Available From The Dealership. Part # Is 15616327 __________________ 1987 R3500 CREW CAB DUALLY (BIG RED)Acquired 06/12/2015 1990 chevy suburban V2500 5.7L My cluster Mods-Nov 2007 overhead console Stereo install Round 2 Aug 2009 Heated/turn signal mirror upgrade

06-12-2008, 05:09 PM	#43
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: What did you get done? 06/08 I know that this weekend is almost here, but last weekend was spent at a Family Reunion on my Wife's side. Lucky for me her uncle is a hot rodder. Sunday was spent going to church and then working on the yard. No truck stuff this time... By the way, N2TRUX, I don't like you anymore... I used to live in SA and really miss the food at Casa Rio. That is the first place we go eat at when ever we go back...I think that I got to check out that resort. That looks awsome. Hope you and your family enjoyed it! __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.