Tach dash rebuilt like new - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**KevsClassics** · 05-21-2008, 07:29 AM

This has been completly reconditioned. Includes new bezel, tachometer,printed circuit and bulbs. Lens is original but has been polished to better then new conditioned. all gauges have been tested. Needles have been painted. Odometer has been reset to zero.
I stand behind all my work. $450.00 shipping incl. anywhere in the U.S.

Robert Paul Thomas · 05-21-2008, 02:19 PM

Just a question, what is the easiest way to reset the od to 0?
Thanks

**KevsClassics** · 05-23-2008, 07:35 AM

Remove odometer wheel, remove plastic retainer,then starting from the left set each number to nine and turn wheel one more time to 000000

**KevsClassics** · 05-24-2008, 06:56 AM

Complete wire harness for tach Incl.

PossumCountry · 05-24-2008, 04:21 PM

Just a question how do you polish the lens? What do you use? Would appreciate some advise.

teamradrz1 · 05-24-2008, 07:56 PM

Quote:

Originally Posted by PossumCountry

Just a question how do you polish the lens? What do you use? Would appreciate some advise.

Meguiars and Mothers both make a plastic polish and the speed ball works pretty good (just don't polish the side of the lens with the numbers)

PossumCountry · 05-24-2008, 10:58 PM

Thanks for the advise

**KevsClassics** · 06-03-2008, 01:29 AM

Quote:

Originally Posted by KevsClassics

This has been completly reconditioned. Includes new bezel, tachometer,printed circuit and bulbs. Lens is original but has been polished to better then new conditioned. all gauges have been tested. Needles have been painted. Odometer has been reset to zero.
I stand behind all my work. $450.00 shipping incl. anywhere in the U.S.

SHOW QUALITY

SWILL · 06-03-2008, 11:43 AM

Would this fit in place of any stock dash. Mine is set up where the blinkers and generator light are in where the tach sits. It has an aftermarket tach set up on the column already, I believe its a sun tach, would the wiring for that work for the tach in the restored dash. Im thinking everything should just connect right up, or is it not that easy ? Would love to have that and get rid of all the other after market gauges. Thanks

Shane

**KevsClassics** · 06-03-2008, 08:29 PM

Quote:

Originally Posted by SWILL

Would this fit in place of any stock dash. Mine is set up where the blinkers and generator light are in where the tach sits. It has an aftermarket tach set up on the column already, I believe its a sun tach, would the wiring for that work for the tach in the restored dash. Im thinking everything should just connect right up, or is it not that easy ? Would love to have that and get rid of all the other after market gauges. Thanks

Shane

Yes it will work in your truck but it will need some rewiring, you will have to change the temp sender to work a gauge instead of a light. you would also have to run a oil line to oil pressure gauge. I have done this many times.

semperfidoordie · 06-03-2008, 08:51 PM

Quote:

Originally Posted by KevsClassics

This has been completly reconditioned. Includes new bezel, tachometer,printed circuit and bulbs. Lens is original but has been polished to better then new conditioned. all gauges have been tested. Needles have been painted. Odometer has been reset to zero.
I stand behind all my work. $450.00 shipping incl. anywhere in the U.S.

Kev...do you sell the tach by it's self with wiring harness? I have a really solid dash in my truck just need the factory tach itself. If so how much with shipping? PM me if you would.

**KevsClassics** · 06-03-2008, 09:38 PM

Quote:

Originally Posted by semperfidoordie

Kev...do you sell the tach by it's self with wiring harness? I have a really solid dash in my truck just need the factory tach itself. If so how much with shipping? PM me if you would.

You would also need the inner tins, the printed circuit and also the lens. You would be better off buying the one I haveand selling yours.

semperfidoordie · 06-03-2008, 09:51 PM

Thanks I'll look into it. Not quite sure how much I could get out of mine.

rwilhi · 06-07-2008, 01:38 AM

Kev, How much to pickup from you? vs shipping? I am in SF.. Thanks

**KevsClassics** · 07-12-2008, 07:00 PM

ttt

**DANTIP** · 07-14-2008, 10:33 AM

Super nice work. At the end of the summer I would like you to rework my dash. How long would you need to have it?

Thanks,
Dan

**KevsClassics** · 07-14-2008, 10:58 PM

Quote:

Originally Posted by DANTIP

Super nice work. At the end of the summer I would like you to rework my dash. How long would you need to have it?

Thanks,
Dan

It would be about 1 week plus transit time.

05-21-2008, 07:29 AM	#1
KevsClassics TILT COLUMN GURU Join Date: Dec 2006 Location: FRESNO CA Posts: 4,276	Tach dash rebuilt like new This has been completly reconditioned. Includes new bezel, tachometer,printed circuit and bulbs. Lens is original but has been polished to better then new conditioned. all gauges have been tested. Needles have been painted. Odometer has been reset to zero. I stand behind all my work. $450.00 shipping incl. anywhere in the U.S. Attached Images

05-21-2008, 02:19 PM	#2
Robert Paul Thomas 1967 C-10 SWB LS-6 T-56 Join Date: Feb 2007 Location: Ontario Canada Posts: 425	Re: Tach dash rebuilt like new Just a question, what is the easiest way to reset the od to 0? Thanks

05-23-2008, 07:35 AM	#3
KevsClassics TILT COLUMN GURU Join Date: Dec 2006 Location: FRESNO CA Posts: 4,276	Re: Tach dash rebuilt like new Remove odometer wheel, remove plastic retainer,then starting from the left set each number to nine and turn wheel one more time to 000000

05-24-2008, 06:56 AM	#4
KevsClassics TILT COLUMN GURU Join Date: Dec 2006 Location: FRESNO CA Posts: 4,276	Re: Tach dash rebuilt like new Complete wire harness for tach Incl.

05-24-2008, 04:21 PM	#5
PossumCountry Registered User Join Date: Sep 2007 Location: Twining, Michigan Posts: 17	Re: Tach dash rebuilt like new Just a question how do you polish the lens? What do you use? Would appreciate some advise.

05-24-2008, 10:58 PM	#7
PossumCountry Registered User Join Date: Sep 2007 Location: Twining, Michigan Posts: 17	Re: Tach dash rebuilt like new Thanks for the advise

06-03-2008, 11:43 AM	#9
SWILL Registered User Join Date: Oct 2007 Location: Minnesota Posts: 24	Re: Tach dash rebuilt like new Would this fit in place of any stock dash. Mine is set up where the blinkers and generator light are in where the tach sits. It has an aftermarket tach set up on the column already, I believe its a sun tach, would the wiring for that work for the tach in the restored dash. Im thinking everything should just connect right up, or is it not that easy ? Would love to have that and get rid of all the other after market gauges. Thanks Shane

06-03-2008, 09:51 PM	#13
semperfidoordie Fix It Till It's Broke Join Date: Apr 2007 Location: 29 Palms, CA Posts: 1,616	Re: Tach dash rebuilt like new Thanks I'll look into it. Not quite sure how much I could get out of mine. __________________ Tony Black Beauty: 85 C-10 SOLD! Great White: 69 LWB Custom Camper/20 SOLD! Blue Dragon: 72 K-10 SOLD! The Tank 77 K-10 KIA panhandler62: Just don't search for "trannys" no matter how hard yours shifts -- you just won't get what you are looking for. I Made The Official So Cal Board Meet

06-07-2008, 01:38 AM	#14
rwilhi Registered User Join Date: Jan 2008 Location: Bay Area, California Posts: 67	Re: Tach dash rebuilt like new Kev, How much to pickup from you? vs shipping? I am in SF.. Thanks

07-12-2008, 07:00 PM	#15
KevsClassics TILT COLUMN GURU Join Date: Dec 2006 Location: FRESNO CA Posts: 4,276	Re: Tach dash rebuilt like new ttt

07-14-2008, 10:33 AM	#16
DANTIP Registered User Join Date: Sep 2001 Location: Fort Wayne, Indiana, USA Posts: 1,888	Re: Tach dash rebuilt like new Super nice work. At the end of the summer I would like you to rework my dash. How long would you need to have it? Thanks, Dan

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.