retro-sound truck stereo - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ace in the hole · 07-25-2008, 10:08 AM

I finally got the retrosound radio installed. I have to say the instructions that come with it stink. I realize that they are making this radio for hundreds of applications so they can only give general instructions with the base unit but I thought buy buying the 67-72 truck adapter plate I would get some more specific instructions but I guess I was wrong. All in all it went quite well though. I'll try to take some pics and give more details later gtg now.

Critter · 07-25-2008, 11:12 AM

Quote:

Originally Posted by Ace in the hole

I finally got the retrosound radio installed. I have to say the instructions that come with it stink. I realize that they are making this radio for hundreds of applications so they can only give general instructions with the base unit but I thought buy buying the 67-72 truck adapter plate I would get some more specific instructions but I guess I was wrong. All in all it went quite well though. I'll try to take some pics and give more details later gtg now.

Yep, definitely need to see some pics! Have you listened to it enough to comment on the sound quality? I don't plan on entering the ol K5 in any audio competitions, but for the price I want it to be decent. I'm glad someone finally took the plunge and bought one.

2nd_wnd · 07-25-2008, 12:24 PM

has anybody tried the one from manes truck parts.
http://www.manestruckparts.com/store...Category_ID=20

Name: Product_958P.jpg
Views: 1474
Size: 20.6 KB

70ChevyCST · 07-25-2008, 01:17 PM

Just installed a CS-1 stereo from retro-sound in my 1970 Chevy CST-10. Well... it was a lot of messing around but it's in there and working at the moment. To make a long story short....the first unit I put in quit playing after a week. I removed sent it back...they sent me a new one. They were very good about this. No questions asked...This second one I struggled with too...It kept powering up in European mode even with the side switch set on USA. European mode has military time and MW (mid-wave) instead of our AM radio. Anyways, for some reason I had to cut power to the unit with the power on...then it powered up in USA mode. Just finished the install last night. This CS-1 radio is on E-bay....should still be there..there was 20-25 left when I bought it about a month ago. They are closing them out for $109.00. When they're gone they're gone. They came out with the model 1 to replace it...but they're like $329.00....I'll try to get a photo of it installed in the next few days. I'd agree with the guy that said the instructions are poor...You basically have to figure most of how it operates yourself. They really cut corners on the owner's manual...Only time will tell... I believe they give 90 days warranty...Oh yes...The sound is decent...I'm using some old well used speakers for right now and I feel the sound is still good. Also...no dash modification necessary...Fits right in factory holes. There had been a slight mod. done on my dash in the past by a previous owner (center rectangle slightly wider on right) so this unit was nice because they provided a faceplate to cover it all up.....Bob

Got home had some time to shoot some photos so here they are.

badpeanut · 07-25-2008, 06:47 PM

Quote:

Originally Posted by 70ChevyCST

Just installed a CS-1 stereo from retro-sound in my 1970 Chevy CST-10.

Can you get factory style knobs for it or use factory knobs on it?

How many speakers did you hook up to it?

fnoblitt · 07-25-2008, 07:08 PM

i bought the retro radio that brothers sells. it worked for a week. all the adjustments were built into the knobs ,poor quality to say the least. i ended up cutting the dash and installing a jvc stereo/cd player. easier to control and the sound is a lot better the the pos retro . i'm happy now

Sicmaro · 07-25-2008, 07:53 PM

i have the retro sound and don't have any complaints with it! except its a pain to adjust the mounting to get it just right.

Ace in the hole · 07-25-2008, 10:40 PM

here are a couple of pics of my retrosound radio-

Ace in the hole · 07-25-2008, 11:03 PM

sorry for the blurry one. all in all it went well. I also opted for retrosounds retromod 4x10 speaker in the stock location. I modified the stock speaker mounting bracket and slipped the speaker into the stock location. It's no hi-fi system set up like this but it actually sounds quite well for a single speaker set up. I can crank it up real loud and have very minimal distortion. The single speaker has hook ups for two channels so I hook it up to the front left & right connections. I think I will add a couple of more speakers and hook them to the rear channels, it should sound awesome
It took a little figuring to get the mounting the way I wanted but it actually did not take long. I can give some tips to anyone interested.
A side note, the 67-72 kit should come with new knobs too. Mine did not and I emailed them to see why. I have not heard back from them yet but I am sure that they will send me a set of 67-72 knobs.

67_C-30 · 07-25-2008, 11:19 PM

Is that stereo ipod compatible?

Sicmaro · 07-25-2008, 11:21 PM

it plays the ipod through the aux input, the head phone style plug. it doesnt work through the usb port.

Ace in the hole · 07-25-2008, 11:24 PM

yes, it has an aux input that could be used to hook up an ipod. You can also just plug in a usb flash drive and play the music right off it, no mp3 player needed.

Ace in the hole · 07-26-2008, 07:36 AM

I heard back from retrosound, the missing 67-72 knobs are on their way to me. So far I am impressed with the company.

LUV2XCLR8 · 07-26-2008, 07:41 AM

Ace,

How much was that unit?

Luv

Ace in the hole · 07-26-2008, 07:50 AM

check it out here- http://www.retrosoundusa.com/products/details/id/9
I guess they are now being sold at jegs & crutchfield too. crutchfield has them for $250

70ChevyCST · 07-28-2008, 07:21 PM

I didn't try putting old factory knobs on it from the original radio. I liked the ones they gave me so I didn't even think to try them. I think the guy at retrosound mentioned that they make factory style knobs. At the time I bought the radio he said they were out of them. The ones he gave me (in the photos) are real nice...they're chromed metal knobs. I have 4 speakers hooked up...two under the seat and two smaller ones mounted up under the dash one on each side...

Ace in the hole · 07-28-2008, 10:12 PM

ya, their standard chrome knobs are not bad. I want to get the ones that should have come with the kit and then see which ones I'll leave on. I am very happy with this radio. It sounds real good even with only one speaker. I don't have AC so I have the windows down most of the time and having it turned up to hear it over the wind noise it sounds pretty nice. I also tried out the usb port with a small pocket drive, it works great too.

straitnate14 · 07-29-2008, 01:16 AM

the next thing I get for my tuck is going to be the retro audio sound radio but I will also have to get a lot of stuff to get it to work like speakers, anttena, and all the wiring but it will be coming soon

07-25-2008, 10:08 AM	#26
Ace in the hole Registered User Join Date: Apr 2007 Location: Kalamazoo, Michigan, USA Posts: 538	Re: retro-sound truck stereo I finally got the retrosound radio installed. I have to say the instructions that come with it stink. I realize that they are making this radio for hundreds of applications so they can only give general instructions with the base unit but I thought buy buying the 67-72 truck adapter plate I would get some more specific instructions but I guess I was wrong. All in all it went quite well though. I'll try to take some pics and give more details later gtg now. __________________ 1970 K20, 350--- SOLD 05 silverado extended cab short box- duramax Jeep wrangler unlimited

07-25-2008, 12:24 PM	#28
2nd_wnd Registered User Join Date: Feb 2007 Location: Winston Salem, NC Posts: 310	Re: retro-sound truck stereo has anybody tried the one from manes truck parts. http://www.manestruckparts.com/store...Category_ID=20 __________________ 72 LWB Last edited by 2nd_wnd; 07-25-2008 at 12:26 PM. Reason: added pic

07-25-2008, 01:17 PM	#29
70ChevyCST Registered User Join Date: May 2007 Location: usa Posts: 71	Re: retro-sound truck stereo Just installed a CS-1 stereo from retro-sound in my 1970 Chevy CST-10. Well... it was a lot of messing around but it's in there and working at the moment. To make a long story short....the first unit I put in quit playing after a week. I removed sent it back...they sent me a new one. They were very good about this. No questions asked...This second one I struggled with too...It kept powering up in European mode even with the side switch set on USA. European mode has military time and MW (mid-wave) instead of our AM radio. Anyways, for some reason I had to cut power to the unit with the power on...then it powered up in USA mode. Just finished the install last night. This CS-1 radio is on E-bay....should still be there..there was 20-25 left when I bought it about a month ago. They are closing them out for $109.00. When they're gone they're gone. They came out with the model 1 to replace it...but they're like $329.00....I'll try to get a photo of it installed in the next few days. I'd agree with the guy that said the instructions are poor...You basically have to figure most of how it operates yourself. They really cut corners on the owner's manual...Only time will tell... I believe they give 90 days warranty...Oh yes...The sound is decent...I'm using some old well used speakers for right now and I feel the sound is still good. Also...no dash modification necessary...Fits right in factory holes. There had been a slight mod. done on my dash in the past by a previous owner (center rectangle slightly wider on right) so this unit was nice because they provided a faceplate to cover it all up.....Bob Got home had some time to shoot some photos so here they are. __________________ I'm a grateful Christian not perfect in any way, but always striving to become better with Christ's help. I'm grateful for what He did for me on that cross at Calvary. I hope there is a desire in your heart for the same: If you confess with your mouth that Jesus is Lord and believe in your heart that God raised him from the dead, you will be saved. Romans 10:9 Last edited by 70ChevyCST; 07-25-2008 at 06:28 PM. Reason: mis-spell

07-25-2008, 07:08 PM	#31
fnoblitt Registered User Join Date: Mar 2002 Location: southern calif.,usa Posts: 200	Re: retro-sound truck stereo i bought the retro radio that brothers sells. it worked for a week. all the adjustments were built into the knobs ,poor quality to say the least. i ended up cutting the dash and installing a jvc stereo/cd player. easier to control and the sound is a lot better the the pos retro . i'm happy now __________________ 70 c10 stepside ,350v8, m-20 4 speed

07-25-2008, 07:53 PM	#32
Sicmaro Always wrenching!! Join Date: Apr 2007 Location: Sacramento, CA Posts: 301	Re: retro-sound truck stereo i have the retro sound and don't have any complaints with it! except its a pain to adjust the mounting to get it just right. __________________ 71 C-10 5.3L/4L60E 72 Camaro LS6/4L60E 06 Duramax 19 RZR XP4 turbo Dynamix 56 Belair 5.3/4L60E swap in progress Last edited by Sicmaro; 07-25-2008 at 10:54 PM.

07-25-2008, 10:40 PM	#33
Ace in the hole Registered User Join Date: Apr 2007 Location: Kalamazoo, Michigan, USA Posts: 538	Re: retro-sound truck stereo here are a couple of pics of my retrosound radio- Attached Images __________________ 1970 K20, 350--- SOLD 05 silverado extended cab short box- duramax Jeep wrangler unlimited

07-25-2008, 11:03 PM	#34
Ace in the hole Registered User Join Date: Apr 2007 Location: Kalamazoo, Michigan, USA Posts: 538	Re: retro-sound truck stereo sorry for the blurry one. all in all it went well. I also opted for retrosounds retromod 4x10 speaker in the stock location. I modified the stock speaker mounting bracket and slipped the speaker into the stock location. It's no hi-fi system set up like this but it actually sounds quite well for a single speaker set up. I can crank it up real loud and have very minimal distortion. The single speaker has hook ups for two channels so I hook it up to the front left & right connections. I think I will add a couple of more speakers and hook them to the rear channels, it should sound awesome It took a little figuring to get the mounting the way I wanted but it actually did not take long. I can give some tips to anyone interested. A side note, the 67-72 kit should come with new knobs too. Mine did not and I emailed them to see why. I have not heard back from them yet but I am sure that they will send me a set of 67-72 knobs. __________________ 1970 K20, 350--- SOLD 05 silverado extended cab short box- duramax Jeep wrangler unlimited Last edited by Ace in the hole; 07-25-2008 at 11:09 PM.

07-25-2008, 11:19 PM	#35
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: retro-sound truck stereo Is that stereo ipod compatible? __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!

07-25-2008, 11:21 PM	#36
Sicmaro Always wrenching!! Join Date: Apr 2007 Location: Sacramento, CA Posts: 301	Re: retro-sound truck stereo it plays the ipod through the aux input, the head phone style plug. it doesnt work through the usb port. __________________ 71 C-10 5.3L/4L60E 72 Camaro LS6/4L60E 06 Duramax 19 RZR XP4 turbo Dynamix 56 Belair 5.3/4L60E swap in progress

07-25-2008, 11:24 PM	#37
Ace in the hole Registered User Join Date: Apr 2007 Location: Kalamazoo, Michigan, USA Posts: 538	Re: retro-sound truck stereo yes, it has an aux input that could be used to hook up an ipod. You can also just plug in a usb flash drive and play the music right off it, no mp3 player needed. __________________ 1970 K20, 350--- SOLD 05 silverado extended cab short box- duramax Jeep wrangler unlimited

07-26-2008, 07:36 AM	#38
Ace in the hole Registered User Join Date: Apr 2007 Location: Kalamazoo, Michigan, USA Posts: 538	Re: retro-sound truck stereo I heard back from retrosound, the missing 67-72 knobs are on their way to me. So far I am impressed with the company. __________________ 1970 K20, 350--- SOLD 05 silverado extended cab short box- duramax Jeep wrangler unlimited

07-26-2008, 07:41 AM	#39
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,484	Re: retro-sound truck stereo Ace, How much was that unit? Luv __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

07-26-2008, 07:50 AM	#40
Ace in the hole Registered User Join Date: Apr 2007 Location: Kalamazoo, Michigan, USA Posts: 538	Re: retro-sound truck stereo check it out here- http://www.retrosoundusa.com/products/details/id/9 I guess they are now being sold at jegs & crutchfield too. crutchfield has them for $250 __________________ 1970 K20, 350--- SOLD 05 silverado extended cab short box- duramax Jeep wrangler unlimited

07-28-2008, 07:21 PM	#41
70ChevyCST Registered User Join Date: May 2007 Location: usa Posts: 71	Re: retro-sound truck stereo I didn't try putting old factory knobs on it from the original radio. I liked the ones they gave me so I didn't even think to try them. I think the guy at retrosound mentioned that they make factory style knobs. At the time I bought the radio he said they were out of them. The ones he gave me (in the photos) are real nice...they're chromed metal knobs. I have 4 speakers hooked up...two under the seat and two smaller ones mounted up under the dash one on each side... __________________ I'm a grateful Christian not perfect in any way, but always striving to become better with Christ's help. I'm grateful for what He did for me on that cross at Calvary. I hope there is a desire in your heart for the same: If you confess with your mouth that Jesus is Lord and believe in your heart that God raised him from the dead, you will be saved. Romans 10:9

07-28-2008, 10:12 PM	#42
Ace in the hole Registered User Join Date: Apr 2007 Location: Kalamazoo, Michigan, USA Posts: 538	Re: retro-sound truck stereo ya, their standard chrome knobs are not bad. I want to get the ones that should have come with the kit and then see which ones I'll leave on. I am very happy with this radio. It sounds real good even with only one speaker. I don't have AC so I have the windows down most of the time and having it turned up to hear it over the wind noise it sounds pretty nice. I also tried out the usb port with a small pocket drive, it works great too. __________________ 1970 K20, 350--- SOLD 05 silverado extended cab short box- duramax Jeep wrangler unlimited



Register or Log In To remove these advertisements.

07-29-2008, 01:16 AM	#43
straitnate14 Registered User Join Date: Feb 2008 Location: Bartonville IL Posts: 415	Re: retro-sound truck stereo the next thing I get for my tuck is going to be the retro audio sound radio but I will also have to get a lot of stuff to get it to work like speakers, anttena, and all the wiring but it will be coming soon __________________ ΜΟΛΩΝ ΛΑΒΕ

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.