|
02-10-2003, 10:52 PM
|
#1 |
|
Got earplugs?
Join Date: Mar 2002
Location: Winfield, Kansas
Posts: 556
|
Dash
I have all the stuff in my cab changed out to black now, except the top of the dash the part behind the dash pad, does anyone know of a good way to paint this?
 
__________________
1968 GMC Original A/C, bucket seats, PS,PB 396 bored to 402, Dynomax cerama-coat headers, Super 40 Flowmasters, 272/284 Crane cam, Crane gold roller rockers, holley 750 cfm double pumper, Edelbrock Performer RPM intake, HEI ignition, 9.5:compression Alltogether 411HP and 446ft/lbs Dana 60 w/ 3.54 gears Turbo 400 tranny Why would you have anything other than a big block? HAHA |
|
|
|
02-10-2003, 11:39 PM
|
#2 |
|
ready for reassembly
Join Date: Jun 2002
Location: Barrie ONT, Canada
Posts: 413
|
when I painted mine, I did the whole inside of the cab.....but the windsheild was out, so it was no problem! I'm assuming your's is still in? That'll make it a lot more difficult!
I guess you'd either have to mask around the rubber and glass, which will be a huge pain....or take the w.shield out.....which will also be a pain, unless you know what you're doing
__________________
stock 71 4x4 2003 Jeep Liberty, rocky mountain edition I'm obsessed, and wouldn't have it any other way! |
|
|
|
|
02-11-2003, 09:29 AM
|
#3 |
|
1969 Custom 30 wrecker
Join Date: Sep 2001
Location: Pottsville, Pa
Posts: 2,611
|
Just tape off the rubber and windshield and spray it. A spray can flat black is fine for this area. Don't use gloss or it will reflect off the glass.
__________________
Bob 63 Impala 283/PG/3.36 (under restoration) 66 Impala 327/PG/3.36 66 Chevelle SS 409/M22/3.55 69 Chevelle 307/PG/3.08 (future restoration) 69 C10 short stepside 454/TH350/3.73 69 Custom 30 tow truck 350/4 spd/4.10 (resto done, CRUISIN TIME!) 71 Cheyenne 20 fleetside 350/4 spd/4.10 71 Chevelle 6/PG/3.08 72 Chevelle 454/M21/4.10 |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
