|
08-13-2008, 05:55 PM
|
#1 |
|
Registered User
Join Date: Jun 2008
Location: South Florida
Posts: 11,375
|
Al's 71C10 Rebuild...updated with new additions
Well after going back and forward on my mind I decided to do an upgrade which turned out to be several at the same time... My truck is a 71c10 3spd manual bottom of the barrel with power nothing.
1971 Chevy C-10 fully done from top to bottom. The list of upgrades are as follows: *Classic auto Air A/C kit DONE * Chevy 400 small block motor FULLY BUILT DONE *Convert to automatic fully built(turbo 350) DONE *Brand New steering column assy (DONE *Replace engine wire harness and dash wire harnes DONE *New Griffin Aluminum Radiator DONE *Flexalite Electric Fans DONE *Replace the radiator support DONE * Brand new inner fenders DONE *NEW battery Tray DONE * Add power steering DONE *Shaved the firewall DONE *Repaint the engine bay DONE *Repaint the interior of the Cab DONE *Redo the rear differential and install auburn unit DONE *Install new wheel combo 18/20 DONE *Shaved antenna hole off cowlpanel DONE *Smoothed firewall DONE * ECE 4/6 Drop DONE *Early Classics panhard bar DONE *Install tonneu cover DONE *ECE Hidden hitch DONE *Replaced mirrors DONE *Tinted Windows DONE *New rear bumper arms DONE * Replaced all Door Handles inner and outers DONE *Replaced all weatherstrips and seals DONE *Change Steering wheel DONE *Rewired the complete truck and not a wire to show in the engine area or a/c lines DONE *March Pulley Set DONE *In dash am/fm cd player DONE *Kick panels with speakers DONE *Early Classics Front Sway Bar DONE *Early Classic Trailing Arms on the rear DONE *Billet Specialties valve cover and Air cleaner with K&N filter DONE *Brand new calipers and rotors DONE *Brand New Drums seals and rear shoes DONE *Brand New auburn posi unti and 373 richmond grears DONE *Completely rebuilt the rear differential seals bearings DONE * Doug Thorley ceramic coated headers DONE * Dynomax Mufflers with brand new exhaust DONE * Tailgate chevrolet band DONE * Autometer Gauges DONE * Four wheel Wilwood brakes DONE * Wilwood manual master cylinder DONE *C-notch DONE *Air Ride technologies DONE * Billet Specialties Wheels 20x8.5 and 20x10 DONE *New Tires DONE * Exhaust redone (2nd time) DONE * Painless under dash lights DONE *Billet hood hinges DONE The list keeps growing every time I look at it,, well I will post picts of the progress to share with you all....
__________________
Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild Last edited by VA72C10; 09-16-2012 at 03:41 PM. |
|
|
|
08-13-2008, 06:06 PM
|
#2 |
|
Registered User
Join Date: Jun 2008
Location: South Florida
Posts: 11,375
|
Re: Al's 71C10 Rebuild
more picts of the progess so far!!!
__________________
Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild Last edited by big_al_71; 08-13-2008 at 06:07 PM. |
|
|
|
|
08-13-2008, 06:09 PM
|
#3 |
|
Registered User
Join Date: Jun 2008
Location: South Florida
Posts: 11,375
|
Re: Al's 71C10 Rebuild
Of course after taking it apart we ran into rusted out inner passenger side fender, battery box and I might as well replace the drivers side also...
I spent about an hour buying a bunch of parts on line, now I am sitting here like a kid waiting for the big brown truck!!!!!
__________________
Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild |
|
|
|
|
08-13-2008, 06:49 PM
|
#4 |
|
Registered User
Join Date: Jan 2008
Location: Oakdale, Ca
Posts: 655
|
Re: Al's 71C10 Rebuild
your truck looks good to begin with, good luck with the build.
__________________
1970 2wd short/fleet 350/350 Project "iced green dream" http://67-72chevytrucks.com/vboard/s...d.php?t=272702 2006 Toyota Tacoma double cab 4x4 |
|
|
|
|
08-13-2008, 11:02 PM
|
#5 |
|
Registered User
Join Date: Dec 2006
Location: Baytown, Texas
Posts: 194
|
Re: Al's 71C10 Rebuild
Good luck with the build I also thing it looked pretty good to begin with, but it will be a lot better when you finish it.
__________________
1971 C-10 2004 Yukon: 1998 Honda Accord 2008 Honda Civic 2004 HD V-Rod http://67-72chevytrucks.com/vboard/s...d.php?t=226458 |
|
|
|
|
08-13-2008, 11:18 PM
|
#6 |
|
Registered User
Join Date: Jun 2008
Location: South Florida
Posts: 11,375
|
Re: Al's 71C10 Rebuild
Well I got home tonight and started thinking about new wheels and tires I did alot of reading on the site from other members and boy there are many choices...I am leaning on foose nitro 18's in the front and 20's in the rear..I am not going to do a body drop but I might go lower than where it is at now maybe four six drop.
__________________
Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild |
|
|
|
|
08-14-2008, 03:47 PM
|
#7 |
|
Registered User
Join Date: Jun 2008
Location: South Florida
Posts: 11,375
|
Re: Al's 71C10 Rebuild
The tearing down continues, today the complete dash assy was guttet out as well as the steering column and everything else on the firewall....
I know you all like picts....
__________________
Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild Last edited by big_al_71; 08-26-2008 at 05:41 PM. |
|
|
|
|
08-14-2008, 03:50 PM
|
#8 |
|
Registered User
Join Date: Jun 2008
Location: South Florida
Posts: 11,375
|
Re: Al's 71C10 Rebuild
some more picts....
__________________
Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild Last edited by big_al_71; 08-26-2008 at 05:39 PM. |
|
|
|
|
08-14-2008, 04:34 PM
|
#9 |
|
Registered User
 
Join Date: Jun 2006
Location: Olive Branch, MS
Posts: 824
|
Re: Al's 71C10 Rebuild
Nice project you have going. Keep the pics comming.
__________________
68 C10 Shortbed Fleetside 06 Chevy Ext Cab Fleetside 03 Grand Prix GTP My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=269999 |
|
|
|
|
08-14-2008, 11:22 PM
|
#10 |
|
Junior Member
Join Date: Jul 2007
Location: Odenton, Md
Posts: 552
|
Re: Al's 71C10 Rebuild
I see....looks good. Working at the dealer huh. If I did not work at a dealer..my truck would still be sitting.
 Keep this updated...Ill check in.
__________________
going to sell this one...looking for a SWB project next. |
|
|
|
|
08-14-2008, 11:30 PM
|
#11 |
|
Registered User
Join Date: Jun 2008
Location: South Florida
Posts: 11,375
|
Re: Al's 71C10 Rebuild
yes I have the luxury of a 30 bay shop and a great group of techs that really like working and helping me with my "buckets"
the never ending story!!!!
__________________
Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild |
|
|
|
|
08-14-2008, 11:34 PM
|
#12 |
|
Junior Member
Join Date: Jul 2007
Location: Odenton, Md
Posts: 552
|
Re: Al's 71C10 Rebuild
Nothing like having a vehicle lift at your fingertips and all the tools you need. Mine was in my shop for over hald the year (work in progress)
Good luck
__________________
going to sell this one...looking for a SWB project next. |
|
|
|
|
08-14-2008, 11:40 PM
|
#13 |
|
Registered User
Join Date: Jun 2008
Location: South Florida
Posts: 11,375
|
Re: Al's 71C10 Rebuild
I have one lift that I have been using steady for the last month or so. Hopefully I will have this truck back on the road in about two months max and that includes doing some paint work....I have my fingers crossed. At this point I have about five different tracking numbers on many boxes on route to south florida from everywhere..
thanks
__________________
Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild |
|
|
|
|
08-15-2008, 06:57 PM
|
#14 |
|
Registered User
Join Date: Jun 2008
Location: South Florida
Posts: 11,375
|
Re: Al's 71C10 Rebuild
Well the truck will be going to the body shop maybe monday or tuesday to have the firewall smooth, install the new radiator support and the two inner fenders and repaint the complete engine compartment. We cleaned the crap out of the engine bay including frame and all....The only thing we can't do is body work in here or paint for that matter...
__________________
Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild |
|
|
|
|
08-15-2008, 06:59 PM
|
#15 |
|
Registered User
Join Date: Jun 2008
Location: South Florida
Posts: 11,375
|
Re: Al's 71C10 Rebuild
Engine bay up close!!
__________________
Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild |
|
|
|
|
08-19-2008, 09:38 PM
|
#16 |
|
Registered User
Join Date: Jun 2008
Location: South Florida
Posts: 11,375
|
Re: Al's 71C10 Rebuild
after going back and forward this weekend I decided to gut out the rest of the cab, removing the new windshield, gas tank, back glass, carpet and seat....I figure let me repaint the interior of the cab the way it should had been done originally.. Here are some picts of the dissasembling before it finally leaves to the body shop in the next few days.
__________________
Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild |
|
|
|
|
08-21-2008, 06:32 AM
|
#17 |
|
Registered User
Join Date: Jun 2008
Location: South Florida
Posts: 11,375
|
Re: Al's 71C10 Rebuild
I was lucky and I sold my 307 engine with tranny to be able to recoup some of the money I spent on my small block 400.
I finally picked up the "400" and a th350 tranny with a 3,000 stall converter..While the truck is at the body shop I am going to make this bad boy look good. List of things going on it: March Pulley v belt set up. New aluminum water pump new fuel pump new oil pan new carburator new msd dist. new taylor wires new plugs new headers new holley 650 or 750 not sure yet billet specialties or edelbrock classic valve covers and matching air cleaner new paint on the block and heads It is unbelievable how quick the money goes I have spent over 8,000 dollars in parts so far in a month and a half still have to pay for paint job, wheels and tires. I bought parts from Classic auto air, Brothers trucks, classic parts & classic performance great customer service by all of them so far.I am keeping my fingers crossed that everything goes as planned with the body shop and there are no big delays. I guess jegs or summit racing will be the next vendors that I will try finish buying what I have left before reassembling begins.. Still looking for a reasonable priced vendor for my 18 and 20 combo foose nitrous wheels polished not chrome.. Any suggestions...????
__________________
Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild Last edited by big_al_71; 08-21-2008 at 06:34 AM. |
|
|
|
|
08-21-2008, 07:59 AM
|
#18 |
|
Junior Member
Join Date: Jul 2007
Location: Odenton, Md
Posts: 552
|
Re: Al's 71C10 Rebuild
We can make a deal...I am ready to get my 22'', please let me know if we can help each other out
__________________
going to sell this one...looking for a SWB project next. Last edited by Jcentsr6; 08-21-2008 at 08:00 AM. |
|
|
|
|
08-21-2008, 08:55 PM
|
#19 | |
|
Registered User
Join Date: Jun 2008
Location: South Florida
Posts: 11,375
|
Re: Al's 71C10 Rebuild
Quote:
I want to get the same exact wheels but without the rivets look around the edge these are the ones that I am after http://www.newstalgiawheel.com/wheel...ubcat3=1081100 however I would like to help you get rid of yours. I am spreading the word downhere. Who knows maybe I might buy yours.....
__________________
Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild |
|
|
|
|
|
08-21-2008, 09:36 PM
|
#20 | |
|
Junior Member
Join Date: Jul 2007
Location: Odenton, Md
Posts: 552
|
Re: Al's 71C10 Rebuild
Quote:
__________________
going to sell this one...looking for a SWB project next. |
|
|
|
|
|
08-22-2008, 05:17 PM
|
#21 |
|
Registered User
Join Date: Jun 2008
Location: South Florida
Posts: 11,375
|
Re: Al's 71C10 Rebuild
Well she is gone to the body shop
__________________
Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild |
|
|
|
|
08-22-2008, 05:59 PM
|
#22 |
|
Registered User
Join Date: Oct 2007
Location: Sherwood Oregon
Posts: 1,908
|
Re: Al's 71C10 Rebuild
I like your truck alot, it looks very nice. I love getting boxes of parts in the mail
Last edited by LuckyHenriksen; 08-22-2008 at 05:59 PM. |
|
|
|
|
08-22-2008, 06:44 PM
|
#23 | |
|
Registered User
Join Date: Jun 2008
Location: South Florida
Posts: 11,375
|
Re: Al's 71C10 Rebuild
Quote:
Thank you!!! I am trying to make it better!!!
__________________
Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild |
|
|
|
|
|
08-23-2008, 12:09 PM
|
#24 |
|
Tot Roddin'
Join Date: Apr 2005
Location: Mid-MO
Posts: 24,461
|
Re: Al's 71C10 Rebuild
Great looking progress, keep us posted!
__________________
-Nate  1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) |
|
|
|
|
08-23-2008, 07:20 PM
|
#25 |
|
Senior Member
Join Date: Aug 2005
Location: tulsa OK
Posts: 3,070
|
Re: Al's 71C10 Rebuild
looks great
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
