What headers have you used? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Chevy Fleetside** · 07-31-2008, 09:37 PM

Quote:

Originally Posted by billydonn

Or... Get some Taylor SpiroPro cut-to-fit wires and make your own set... that way you know they will be right.

There are two bolt holes in the block right between the middle spark plugs. They are 5/16 I believe. That is where you can bolt up something to hold the wires away from the headers. That is all I was getting at.

billydonn · 08-02-2008, 03:36 PM

Quote:

Originally Posted by Chevy Fleetside

There are two bolt holes in the block right between the middle spark plugs. They are 5/16 I believe. That is where you can bolt up something to hold the wires away from the headers. That is all I was getting at.

Fleetside: Sorry if there's confusion. In my post I just meant you don't have to get a specific Corvette wire set. I wasn't disagreeing with you or anything. It is correct that you need some clips to hold the wires running under the headers away from them and closer the block. Holes for that may be 1/4 x 20, I'm not sure.

**Chevy Fleetside** · 08-02-2008, 05:28 PM

Thats ok.. I type stuff sometimes, then when I read it after and can't understand it..

Now I am sitting here wondering what the heck I am getting at..

brawley · 08-17-2008, 08:28 PM

I used the summit brand ceramic headers and so far so good- they sound great. thanks for the help!

Joey~AP · 08-18-2008, 03:34 PM

Flowtech Update:

Flange fitment was terrible! I had to cut the flange loose to get the bolt holes to line up on the head.

We will see soon if they seal and sound good.

08-02-2008, 05:28 PM	#28
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,781	Re: What headers have you used? Thats ok.. I type stuff sometimes, then when I read it after and can't understand it.. Now I am sitting here wondering what the heck I am getting at.. __________________ "A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536

08-17-2008, 08:28 PM	#29
brawley Easy Does It Join Date: Apr 2007 Location: Dirdy Mo , North Carolina Posts: 450	Re: What headers have you used? I used the summit brand ceramic headers and so far so good- they sound great. thanks for the help! Attached Images

08-18-2008, 03:34 PM	#30
Joey~AP TexasBowhunter Join Date: Mar 2008 Location: alvin, texas Posts: 450	Re: What headers have you used? Flowtech Update: Flange fitment was terrible! I had to cut the flange loose to get the bolt holes to line up on the head. We will see soon if they seal and sound good. __________________ Build in progress for son's first truck.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.