66 slammed hearse

[original_balzer]

Originally Posted by kdrodworks316

I have a CPP master setup. I clamped the pressure bleeder on it and bled the crap out of the whole system. I will go out to the shop and clamp it back on and try again. also going to recheck the harness, I had brake lights till I fixed them, you know, if it aint broke, fix it till it is

Wait! you tried to bleed the MC with one of the pressure/vacc bleeders? Did it come with blue plastic plugs? if so you need to take the lines out put the plugs in and pump the brake pedal till it wont go anymore. Some have tiny rubber hoses that you run back into the MC but its been a long time since I seen those kind. The chambers inside the MC have to be full and the only way to get all the air out is pressure.