torque, is it the same - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GMC70c20 · 02-14-2003, 08:20 PM

say i have a c20 gm turck that is geared 4.56 and has a pretty healthy engine and everyting is stock. If I rebuild my egine up to around 310 hp and 350ft/lbs trqe, If I could keep the tires from spinning would the exeleration be the same less or more. where could i get a 3.90 ring and pinion gears.

GMC70c20 · 02-15-2003, 12:07 AM

is any one there.

02-14-2003, 08:20 PM	#1
GMC70c20 Registered User Join Date: Feb 2003 Location: Iowa Posts: 974	torque, is it the same say i have a c20 gm turck that is geared 4.56 and has a pretty healthy engine and everyting is stock. If I rebuild my egine up to around 310 hp and 350ft/lbs trqe, If I could keep the tires from spinning would the exeleration be the same less or more. where could i get a 3.90 ring and pinion gears. Last edited by GMC70c20; 02-14-2003 at 08:40 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-15-2003, 12:07 AM	#2
GMC70c20 Registered User Join Date: Feb 2003 Location: Iowa Posts: 974	is any one there.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.