![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
So Many Ideas, So Little Money
Join Date: Sep 2001
Location: Marshalltown, IA
Posts: 1,610
|
![]()
ok, I can have the axels welded and redrilled, how about fronts? and if I have the rears redrilled does anyone know of a brake drum that would fit the stock brakes and not be finned? cause the fins hit oneset of wheels I could run.. thanks
Bryce
__________________
72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu ![]() Marshalltown, Iowa |
![]() |
![]() |
![]() |
#2 |
Truck Fanatic
Join Date: Sep 2002
Location: Kelowna, BC, Canada
Posts: 62
|
drums
i used drums off of a 1965 chev belair car , they were the same depth and size just no fins .....
|
![]() |
![]() |
![]() |
#3 |
Truck Fanatic
Join Date: Sep 2002
Location: Kelowna, BC, Canada
Posts: 62
|
you can have the fronts redrilled too , thats what we did... you have to machine down the center cone of rhe drum too .
|
![]() |
![]() |
![]() |
#4 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Wouldn't a 1965 chev belair have the 5 on 5 though? I thought all the full size cars had the big bolt pattern.
|
![]() |
![]() |
![]() |
#5 |
Truck Fanatic
Join Date: Sep 2002
Location: Kelowna, BC, Canada
Posts: 62
|
nope it is 5 on 43/4
|
![]() |
![]() |
![]() |
#6 |
So Many Ideas, So Little Money
Join Date: Sep 2001
Location: Marshalltown, IA
Posts: 1,610
|
there isn't a rotor that will bolt on thats 5 on 4 3/4? I thought I heard some van was
__________________
72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu ![]() Marshalltown, Iowa |
![]() |
![]() |
![]() |
#7 |
Truck Fanatic
Join Date: Sep 2002
Location: Kelowna, BC, Canada
Posts: 62
|
roters
not sure ,i just redrilled mine
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|