|
09-24-2008, 02:23 PM
|
#1 |
|
Senior Member
Join Date: Aug 2002
Location: Valley Center KS
Posts: 3,525
|
front swaybar stands
I'm about to install my front swaybar (1-1/4"
 ). Do I need to get swaybar stands (I'd probably get the "lowered" stands from ECE). The reason I ask is on my GMC that I had, I bolted the bar directly to the frame (cause I didn't know there even was stands at the time....many years ago). However, on the GMC it worked just fine, so why do I really need the stands?
|
|
|
|
09-24-2008, 03:02 PM
|
#2 |
|
Tot Roddin'
Join Date: Apr 2005
Location: Mid-MO
Posts: 24,461
|
Re: front swaybar stands
You can actually install a sway bar without using sway bar brackets, but I think it will depend on how low your truck is. If it's at stock height, then I would use the standard bracket, otherwise lowered brackets/no brackets, would probably put your suspension in a bind.
Since your truck is lowered, I think you would be okay to bolt them directly to the frame and not worry about the brackets. It will pull the bar that much more off the ground... and clearance is a good thing! Good luck with the install!
__________________
-Nate  1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) Last edited by 72BlckButy; 09-24-2008 at 03:03 PM. |
|
|
|
|
09-24-2008, 04:24 PM
|
#3 |
|
Senior Member
 
Join Date: Oct 2001
Location: Lancaster S.C.
Posts: 4,752
|
Re: front swaybar stands
I got 2 1/2 drop spindles on our project and I got all the sway bar brackets, should I use the stands also w stock height springs? I do need one of those
1 1/4 bars though seeing I dont have a swaybar itself!! thanks guys
__________________
Things happen for a reason! |
|
|
|
|
09-24-2008, 05:46 PM
|
#4 |
|
Registered User
Join Date: Oct 2007
Location: greeneville tn
Posts: 237
|
Re: front swaybar stands
I got the kit from ece brackets , bushings ,bolts everything except the bar . I got that at junk yard for about ten bucks . complete set was about 64.00.Truck is 68 gmc everything on the truck is stock i used the lowered brackets.Every thing worked great about an hour to install.
|
|
|
|
|
09-24-2008, 08:12 PM
|
#5 | |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,947
|
Re: front swaybar stands
Quote:
Mild drop (2-4") = shorter aftermarket stands. Extreme drop (6+") bolt it directly to the frame. Each one of these scenarios should keep the bar level w/the frame @ ride height.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
|
|
|
09-25-2008, 02:39 AM
|
#6 |
|
Out of the carpool lane.
Join Date: Jan 2000
Location: Clark Co, WA
Posts: 5,673
|
Re: front swaybar stands
IIRC for a mild drop you can flip the bar upside-down and bolt it to the frame. I seem to recall having done this on my '67 many years ago.
__________________
1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten... |
|
|
|
|
09-25-2008, 06:46 AM
|
#7 |
|
Senior Member
Join Date: Jul 2005
Location: MISSOURI
Posts: 3,256
|
Re: front swaybar stands
Here is a process created by a board member with pictures. Found in FAQ
http://67-72chevytrucks.com/vboard/s...ad.php?t=72338
__________________
The biggest problem people have, is other people Thou shalt be cool and not hassle  Be a site supporter.  The heart of the wise inclines to the right, but the heart of the fool inclines to the left." Ecclesiastes 10:2 |
|
|
|
|
09-25-2008, 08:15 AM
|
#8 | |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,947
|
Re: front swaybar stands
Quote:
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
|
|
|
09-25-2008, 02:14 PM
|
#9 | |
|
Tot Roddin'
Join Date: Apr 2005
Location: Mid-MO
Posts: 24,461
|
Re: front swaybar stands
Quote:
__________________
-Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) |
|
|
|
|
|
09-25-2008, 02:21 PM
|
#10 | |
|
Long Fleet Club
Join Date: Aug 2006
Location: Deer Park, TX
Posts: 5,666
|
Re: front swaybar stands
Quote:
__________________
Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules |
|
|
|
|
|
09-25-2008, 02:58 PM
|
#11 |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,947
|
Re: front swaybar stands
4" drops would be spindles & springs (or bags) & would be where I would start considering the use of the shorter stands (or reversing the mounting position using the stock stands).
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
