$550.00 Raised Crossmember Special!

[FnLow69]

and were are the engine mounts, i see the mounting tabs....

[Rokcrln]

Don't you actually want to road test one before you release a "new to you " product? What is the preferd caster and camber #'s for your kit?

[lowdownstar]

ok help me out here, what is the difference from the $700 kit and this one? just welding up the motor mounts? Or am i missing something? Can some one show some pic's of how all this looks on a truck. What are the benefits of a drop member and is it only for guys wanting to lay frame? Thanks Ray

[jasonb72]

Originally Posted by lowdownstar

ok help me out here, what is the difference from the $700 kit and this one? just welding up the motor mounts? Or am i missing something? Can some one show some pic's of how all this looks on a truck. What are the benefits of a drop member and is it only for guys wanting to lay frame? Thanks Ray

Hers are the other quotes


we will be offering everything listed below during october for $700.00. it will jump to $999.00 after that. we are doing an introductory special.

$700.00 gets you......
1. main crossmember
2. upper bag & control arm mounts
3. inner frame structure brackets
4. rack & pinion frame notches
5. transmission crossmember
6. 350 engine mounts
7. stainless tie rod adjusting sleeves
8. chromoly/teflon 3/4" x 5/8" heims for the spindles
9. all grade 8 mounting hardware

$1500.00 gets you......
1. everything listed above
2. upper and lower control arms
3. upper frame shock mounts
4. monroe shocks

[aggie91]

Originally Posted by Rokcrln

Don't you actually want to road test one before you release a "new to you " product? What is the preferd caster and camber #'s for your kit?

X2

What is the ride/handling like? Other products that are available have some road time and feed back as to the ride of the truck after the install.

[lyrikz]

Originally Posted by Rokcrln

Don't you actually want to road test one before you release a "new to you " product? What is the preferd caster and camber #'s for your kit?

Uhhh, kev, did you miss this part? "We have a few more tests to perform to make sure all is good and ready."

Im sure its being tested.