The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board > 67-72 Chevrolet & GMC Pickups Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-03-2008, 09:00 PM   #1
GSFMECH
On the road

 
GSFMECH's Avatar
 
Join Date: Jan 2004
Location: NATCHITOCHES LOUISIANA
Posts: 818
Re: The GSFMech Build

My Buddy Kevin (65Streetcruiser) came over and we watersanded the firewall, the front of the doors, the inside of the front fenders and shot them. Finally after 2 1/2 years I get to see some blue paint. We shot the door hinges and the a-pillars where they bolt on as well.
Attached Images
    
__________________
Mike

Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos

72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works.

My new build thread "Castro"
https://67-72chevytrucks.com/vboard/...d.php?t=820934

My old build thread, the blue truck
http://67-72chevytrucks.com/vboard/s...d.php?t=271489

www.louisianaclassictruckclub.com

Last edited by GSFMECH; 10-03-2008 at 09:01 PM.
GSFMECH is offline   Reply With Quote
Old 10-03-2008, 09:12 PM   #2
GSFMECH
On the road

 
GSFMECH's Avatar
 
Join Date: Jan 2004
Location: NATCHITOCHES LOUISIANA
Posts: 818
Re: The GSFMech Build

Then I mounted the cab and core support back on the frame using all new rubber mounts. Then I reinstalled the doors, and fenders and aligned everything.
Attached Images
    
__________________
Mike

Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos

72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works.

My new build thread "Castro"
https://67-72chevytrucks.com/vboard/...d.php?t=820934

My old build thread, the blue truck
http://67-72chevytrucks.com/vboard/s...d.php?t=271489

www.louisianaclassictruckclub.com
GSFMECH is offline   Reply With Quote
Old 10-03-2008, 09:16 PM   #3
GSFMECH
On the road

 
GSFMECH's Avatar
 
Join Date: Jan 2004
Location: NATCHITOCHES LOUISIANA
Posts: 818
Re: The GSFMech Build

Kevin and I shot the bottom of the bed and cut in all the edges where it bolts together. Then I undercoated the insides before I bolted them in.
Attached Images
     
__________________
Mike

Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos

72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works.

My new build thread "Castro"
https://67-72chevytrucks.com/vboard/...d.php?t=820934

My old build thread, the blue truck
http://67-72chevytrucks.com/vboard/s...d.php?t=271489

www.louisianaclassictruckclub.com
GSFMECH is offline   Reply With Quote
Old 10-03-2008, 09:19 PM   #4
GSFMECH
On the road

 
GSFMECH's Avatar
 
Join Date: Jan 2004
Location: NATCHITOCHES LOUISIANA
Posts: 818
Re: The GSFMech Build

Thanks Mike, no it's just a hobby, my buddy Kevin is a body guy and works for a local rod shop. We have been building trucks and cars together for years and I've picked up a lot.
__________________
Mike

Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos

72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works.

My new build thread "Castro"
https://67-72chevytrucks.com/vboard/...d.php?t=820934

My old build thread, the blue truck
http://67-72chevytrucks.com/vboard/s...d.php?t=271489

www.louisianaclassictruckclub.com

Last edited by GSFMECH; 10-03-2008 at 09:47 PM.
GSFMECH is offline   Reply With Quote
Old 10-03-2008, 09:21 PM   #5
GSFMECH
On the road

 
GSFMECH's Avatar
 
Join Date: Jan 2004
Location: NATCHITOCHES LOUISIANA
Posts: 818
Re: The GSFMech Build

A few more shots. If you take a look at the photos you can see where I used 3M strip caulk to seal them. The factory used a plastic cement or something according to the assembly manual but this stuff works real good. Also a shot of the front bed panel.
Attached Images
    
__________________
Mike

Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos

72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works.

My new build thread "Castro"
https://67-72chevytrucks.com/vboard/...d.php?t=820934

My old build thread, the blue truck
http://67-72chevytrucks.com/vboard/s...d.php?t=271489

www.louisianaclassictruckclub.com

Last edited by GSFMECH; 10-03-2008 at 09:23 PM.
GSFMECH is offline   Reply With Quote
Old 10-03-2008, 09:25 PM   #6
GSFMECH
On the road

 
GSFMECH's Avatar
 
Join Date: Jan 2004
Location: NATCHITOCHES LOUISIANA
Posts: 818
Re: The GSFMech Build

I then bolted the bed together. I thought long and hard about using stainless bolts but in the end I decided to keep it stock. The bed looks so good as it is I thought it would make it too "busy" if you know what I mean. Sometimes less is more, and the body is completly stock anyway with no mods. Anyway I don't have a shot of it but I used all new carriage bolts and she's bolted together. All that's left is to make the tack welds at the rear
Attached Images
  
__________________
Mike

Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos

72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works.

My new build thread "Castro"
https://67-72chevytrucks.com/vboard/...d.php?t=820934

My old build thread, the blue truck
http://67-72chevytrucks.com/vboard/s...d.php?t=271489

www.louisianaclassictruckclub.com
GSFMECH is offline   Reply With Quote
Old 10-03-2008, 09:28 PM   #7
GSFMECH
On the road

 
GSFMECH's Avatar
 
Join Date: Jan 2004
Location: NATCHITOCHES LOUISIANA
Posts: 818
Re: The GSFMech Build

Before I put the bed on I taped cardboard where the bed sits on the frame so while I was scooting it around bolting it together and such I wouldn't scratch the paint. Here a few shots from the bottom. LOL I see a place on the rear end where the jack stands were that I need to touch up
Attached Images
     
__________________
Mike

Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos

72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works.

My new build thread "Castro"
https://67-72chevytrucks.com/vboard/...d.php?t=820934

My old build thread, the blue truck
http://67-72chevytrucks.com/vboard/s...d.php?t=271489

www.louisianaclassictruckclub.com
GSFMECH is offline   Reply With Quote
Old 10-04-2008, 09:34 PM   #8
LEEVON
Moderator
 
LEEVON's Avatar
 
Join Date: Jul 2006
Location: Ozark, MO
Posts: 4,920
Re: The GSFMech Build

Looking good! I've been wondering if you were still on track for awhile...that's going to be a sweet truck.
__________________
'86 GMC C30 Crew ~ '86 C20 Crew ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '74K10 ~ '71 Cheyenne swb ~'50 3100 bagged ~ '80 Wife ~ Late model kids
LEEVON is offline   Reply With Quote
Old 10-05-2008, 07:49 PM   #9
GSFMECH
On the road

 
GSFMECH's Avatar
 
Join Date: Jan 2004
Location: NATCHITOCHES LOUISIANA
Posts: 818
Re: The GSFMech Build

Yep I'm hanging in there Leevon, thanks for the compliments everyone.
__________________
Mike

Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos

72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works.

My new build thread "Castro"
https://67-72chevytrucks.com/vboard/...d.php?t=820934

My old build thread, the blue truck
http://67-72chevytrucks.com/vboard/s...d.php?t=271489

www.louisianaclassictruckclub.com
GSFMECH is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:06 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com