What did you get done? 10/26 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tgh117 · 10-27-2008, 02:00 PM

I managed to get the painted cab back to my house Fri night from my dad's, where it has been sitting for the last 3 or 4 months since he painted it. Got it moved onto the frame saturday morning before had to go to a wedding, then yesterday got the whole bottom of it painted with Por-15, cut the whole in the floor to drop my 4x4 hump on it, and got all the bed floor members, gas tank, and straps, lift springs, and all the misc pieces painted up to start the reinstall on the truck. Bed is also all painted, and just needs to get back to one piece soon. Was a rather productive weekend for what little time I spent in the garage.

Here are some teasers

**Captkaos** · 10-27-2008, 03:32 PM

I was recovering from a upper and lower respiratory infection so I stayed in most all weekend.

S10Fan · 10-27-2008, 07:17 PM

The wife and I have been discussing a vehicle for my soon to be 16 year old daughter. I’ve decided to hand over my S10 after some changes. I picked up a bone stock solid running 305 with a 200R4 on Saturday that will replace the 383/TH350 currently in the S10. Also going to raise it up a couple inches and change some other things to make it more driver friendly for a 16 year old girl. She loves the truck and I can’t wait to see her face when I hand her the keys. Of course I’ll have her in my beater Mazda first to gain some driving skills.

The 383/350 will find their way into the “Heap” at some point, well, unless I find a decent deal on a big block.

S10Fan · 10-27-2008, 07:17 PM

Quote:

Originally Posted by Captkaos

I was recovering from a upper and lower respiratory infection so I stayed in most all weekend.

That's no fun! Get Well Soon!!

CNC · 10-27-2008, 07:46 PM

Well i worked on the 69 SWB, pulled the engine and tranny again to replace a fly wheel that was the wrong size, got it put back in and all hooked up then we realised that the key to start it was in my dad's 18wheeler......It was in Cali I am in Ok....so no test fire. Started the front suspension conversion But need to wait on the ball joints to come in. So got alot done but not much...

**Captkaos** · 10-27-2008, 08:11 PM

Quote:

Originally Posted by S10Fan

That's no fun! Get Well Soon!!

Definitely not. This time last week I couldn't talk for 10 seconds before coughing my head off.

Thanks for the well wishes.

**N2TRUX** · 10-27-2008, 08:44 PM

Quote:

Originally Posted by Captkaos

....This time last week I couldn't talk for 10 seconds .....

Wow, I bet your wife loved that...

Glad to hear your better buddy.

**Captkaos** · 10-27-2008, 08:47 PM

Quote:

Originally Posted by N2TRUX

Wow, I bet your wife loved that...

Glad to hear your better buddy.

Har har.. Actually the coughing was driving her nuts.

softballnrd27 · 10-27-2008, 09:18 PM

I "tuned-up" my HEI today with a new cap/rotor and advance kit.

flamingbig10 · 10-27-2008, 10:00 PM

went camping with my church, put a new power stearing gearbox on my dads truck when I got home, I also started working on a friends unfinished project a 79 c-20 work truck, ive added a few things to it, tomorrow when I work on it i'll snap some pics

Hoods69BadBowTie · 10-28-2008, 03:20 AM

Worked on my '77 Brown Beater rig got everything out of the way to drop the tranny it was going out bad. Got that all done and go the tranny out tonight. Got a rebuilt one from my buddy thats going to go in there for now. Worked on the Trans Am a little bit and cleaned up the garage.

**N2TRUX** · 10-28-2008, 08:16 AM

Paint and progress looks great tgh117....

SBTork · 10-28-2008, 09:51 AM

I started planning the tear down/part out of my used to be DD '86 C-10, drank a few drinks, and moved some things into storage for the winter.

1BadC10 · 10-29-2008, 09:36 AM

Quote:

Originally Posted by nico

I touched up some spots in the door jams with refrigerator spray paint, installed a new mini-starter and lower radiator hose, and put on my new bargain wheels and drove to a local show/drag race... Nothing spectacular but got a couple "wanna sell it" flag downs on the way.

Here's a pic as it sits now.

Nice truck... I used to get those when I drove my truck daily. Lately, it's been an on/off jackstand queen. Drove to work today, and the headlight hi/lo beam switch craps out 3/4ths of the way. That resulted in spuratic auto on/off of lo AND hi beams.

Here's the latest pic of the truck...

Not your average 262/305/350 C10.

**N2TRUX** · 10-29-2008, 09:41 AM

Quote:

Originally Posted by nico

..... put on my new bargain wheels and drove to a local show/drag race... Nothing spectacular but got a couple "wanna sell it" flag downs on the way.

Looks nice. Reminds me of the one Frank just sold....

**N2TRUX** · 10-29-2008, 09:42 AM

Quote:

Originally Posted by 1BadC10

....Not your average 262/305/350 C10.

Sweet install. Love the sport truck wheels too. I think they are the best looking "truck" wheel GM ever made until recently..

ProStreet83C10 · 10-29-2008, 10:25 AM

saturday i hunted all day.......sunday was so dang windy i stayed home all day watching and listening to it snow and blow then went and ate supper with the family Sun. night.

1BadC10 · 10-29-2008, 12:50 PM

Quote:

Originally Posted by N2TRUX

Sweet install. Love the sport truck wheels too. I think they are the best looking "truck" wheel GM ever made until recently..

Thx. Engine swap wasn't difficult. Interfacing took some time. Wheels are from an SS truck (not the knock-off latter model Silverados).

tgh117 · 10-29-2008, 08:49 PM

Quote:

Originally Posted by N2TRUX

Paint and progress looks great tgh117....

Thanks, my dad owns a body shop, so I know a good place to go for a good price. The whole body is painted now, just starting the slow process of putting back together. It is a Chrysler color, and it has 5 coats of clear over top, so it will be smoooooth when done.

It will look a lot better this time, then when we restored it 14 years ago. The only I don't like about making it look nice, is now it looks so nice, I don't think I can put the plow back on it.

*78 Chevyrado* · 10-29-2008, 09:00 PM

I got my new tailgate band on and all the trim except one piece. The outisde's all done except 1 piece of trim and the rear bumper.

10-27-2008, 02:00 PM	#26
tgh117 Crazy Join Date: Apr 2005 Location: Emmaus, Pa Posts: 203	Re: What did you get done? 10/26 I managed to get the painted cab back to my house Fri night from my dad's, where it has been sitting for the last 3 or 4 months since he painted it. Got it moved onto the frame saturday morning before had to go to a wedding, then yesterday got the whole bottom of it painted with Por-15, cut the whole in the floor to drop my 4x4 hump on it, and got all the bed floor members, gas tank, and straps, lift springs, and all the misc pieces painted up to start the reinstall on the truck. Bed is also all painted, and just needs to get back to one piece soon. Was a rather productive weekend for what little time I spent in the garage. Here are some teasers Attached Images __________________ 77 SB Stepside in a bunch of pieces scattered around the garage.

10-27-2008, 03:32 PM	#27
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: What did you get done? 10/26 I was recovering from a upper and lower respiratory infection so I stayed in most all weekend. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

10-27-2008, 07:17 PM	#28
S10Fan Old Heap Driver Join Date: Mar 2008 Location: Newport News, Va Posts: 2,642	Re: What did you get done? 10/26 The wife and I have been discussing a vehicle for my soon to be 16 year old daughter. I’ve decided to hand over my S10 after some changes. I picked up a bone stock solid running 305 with a 200R4 on Saturday that will replace the 383/TH350 currently in the S10. Also going to raise it up a couple inches and change some other things to make it more driver friendly for a 16 year old girl. She loves the truck and I can’t wait to see her face when I hand her the keys. Of course I’ll have her in my beater Mazda first to gain some driving skills. The 383/350 will find their way into the “Heap” at some point, well, unless I find a decent deal on a big block. __________________ _____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.

10-27-2008, 07:46 PM	#30
CNC Registered User Join Date: Aug 2008 Location: Pryor, Ok Posts: 48	Re: What did you get done? 10/26 Well i worked on the 69 SWB, pulled the engine and tranny again to replace a fly wheel that was the wrong size, got it put back in and all hooked up then we realised that the key to start it was in my dad's 18wheeler......It was in Cali I am in Ok....so no test fire. Started the front suspension conversion But need to wait on the ball joints to come in. So got alot done but not much... __________________ 71 Chevy LWB 81 Chevy LWB I'm not lost.....I'm exploreing!

10-27-2008, 09:18 PM	#34
softballnrd27 Always a work in progress Join Date: Jun 2007 Location: Harker Heights, TX Posts: 1,599	Re: What did you get done? 10/26 I "tuned-up" my HEI today with a new cap/rotor and advance kit. __________________ USMC Retired Never trust a man who can't laugh at his own fart! 2010 Silverado Crew Cab 73 SWB 5.3/4l80e Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=695168

10-27-2008, 10:00 PM	#35
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: What did you get done? 10/26 went camping with my church, put a new power stearing gearbox on my dads truck when I got home, I also started working on a friends unfinished project a 79 c-20 work truck, ive added a few things to it, tomorrow when I work on it i'll snap some pics __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

10-28-2008, 03:20 AM	#36
Hoods69BadBowTie Chevys Kick A$$ Join Date: Jan 2005 Location: Zootown, MT Posts: 12,699	Re: What did you get done? 10/26 Worked on my '77 Brown Beater rig got everything out of the way to drop the tranny it was going out bad. Got that all done and go the tranny out tonight. Got a rebuilt one from my buddy thats going to go in there for now. Worked on the Trans Am a little bit and cleaned up the garage. __________________ HOODS is what I answer too -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER I would rather push a Chevy then drive a ford!!

10-28-2008, 08:16 AM	#37
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: What did you get done? 10/26 Paint and progress looks great tgh117.... __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

10-28-2008, 09:51 AM	#38
SBTork Garage wrench Join Date: Feb 2008 Location: LaCrosse, WI Posts: 1,855	Re: What did you get done? 10/26 I started planning the tear down/part out of my used to be DD '86 C-10, drank a few drinks, and moved some things into storage for the winter. __________________ -Adam 90 V1500 GMC Suburban 350/700R4/NP241..... 01 Saturn SL1 stock DD.....

10-29-2008, 10:25 AM	#42
ProStreet83C10 Drag Racer Join Date: Nov 2006 Location: Mason City, Iowa Posts: 1,276	Re: What did you get done? 10/26 saturday i hunted all day.......sunday was so dang windy i stayed home all day watching and listening to it snow and blow then went and ate supper with the family Sun. night. __________________ Zach Hall 1983 Chevy C10 R/T: .194 60': 2.322 330: 6.379 1/8: 9.803 MPH: 71.37 1000: 12.781 1/4: 15.314 MPH: 88.79

10-29-2008, 09:00 PM	#45
78 Chevyrado Account Suspended Join Date: Dec 2007 Location: Unnapreciative, Trollville Posts: 2,079	Re: What did you get done? 10/26 I got my new tailgate band on and all the trim except one piece. The outisde's all done except 1 piece of trim and the rear bumper.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.