Cab Mounts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hair · 10-29-2008, 01:34 PM

Anyone have a picture, diagram, or some type of illustration on how the cab mounts are supposed to go? I got my new ones in the mail today, but I don't remember exactly how they are supposed to go back in. I've got the bolts, washers, spacers and rubber mounts. What goes where? Also, the rubber doughnut mount that goes between the cab floor and frame has a metal shoulder sticking out of one side about an 1/8". Does that shoulder go toward the cab or the frame? Waht abot the spacers? Where do they go? They will not fit thru the holes in the frame supports.

Hair · 10-29-2008, 05:39 PM

Hmmm, okay. Well, thanks anyway guys.

ulakovic22 · 10-29-2008, 05:48 PM

I'm new here so I have no idea what you are talking about. I did search in the FAQ section though and found this. HTH

http://67-72chevytrucks.com/vboard/s...ghlight=mounts

red69ss · 10-29-2008, 09:13 PM

LMC has adiagram on there website of how they stack up on page 32 online hope this helps

68shortstep · 10-30-2008, 05:57 PM

Here's one I saved. Hope it's legible after re-sizing to work as an image post.

If not, PM me, and I'll email you an original, in .pdf or .jpg file format.

10-29-2008, 01:34 PM	#1
Hair Registered User Join Date: Mar 2008 Location: Tullahoma, TN Posts: 406	Cab Mounts Anyone have a picture, diagram, or some type of illustration on how the cab mounts are supposed to go? I got my new ones in the mail today, but I don't remember exactly how they are supposed to go back in. I've got the bolts, washers, spacers and rubber mounts. What goes where? Also, the rubber doughnut mount that goes between the cab floor and frame has a metal shoulder sticking out of one side about an 1/8". Does that shoulder go toward the cab or the frame? Waht abot the spacers? Where do they go? They will not fit thru the holes in the frame supports.

10-29-2008, 05:39 PM	#2
Hair Registered User Join Date: Mar 2008 Location: Tullahoma, TN Posts: 406	Re: Cab Mounts Hmmm, okay. Well, thanks anyway guys.

10-29-2008, 05:48 PM	#3
ulakovic22 Registered User Join Date: Aug 2008 Location: Lantana, TX Posts: 419	Re: Cab Mounts I'm new here so I have no idea what you are talking about. I did search in the FAQ section though and found this. HTH http://67-72chevytrucks.com/vboard/s...ghlight=mounts

10-29-2008, 09:13 PM	#4
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 852	Re: Cab Mounts LMC has adiagram on there website of how they stack up on page 32 online hope this helps __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein

10-30-2008, 05:57 PM	#5
68shortstep Looks good at 20-ft ..... Join Date: Apr 2005 Location: Mtn Home, AR Posts: 707	Re: Cab Mounts Here's one I saved. Hope it's legible after re-sizing to work as an image post. If not, PM me, and I'll email you an original, in .pdf or .jpg file format. Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.