The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-11-2008, 04:19 PM   #1
Lippyp
English Chevy Owner
 
Lippyp's Avatar
 
Join Date: May 2002
Location: Shropshire, UK/ Lot, France
Posts: 1,848
Bed size question

Can anyone tell me if a '64 long fleetside bed is the same size as my 67 long fleet? The reason I'm asking is I may have found a camper top over here thats currently on a 64 and wonder if it would fit my truck. The shape of it looks like its from a later truck. Can't be that hard to add some side windows to it and maybe some flowery curtains! Heres some pictures of it.




__________________
Phil

'67 C10 long fleet.
350/TH350, 4 bbl Carter, K&N, Dual exhaust, loads of stuff coming soon

2001 S10 Blazer Daily Driver, bone stock 4 door 4x4 with manual transmission
Lippyp is offline   Reply With Quote
Old 10-12-2008, 01:53 PM   #2
Lippyp
English Chevy Owner
 
Lippyp's Avatar
 
Join Date: May 2002
Location: Shropshire, UK/ Lot, France
Posts: 1,848
Re: Bed size question

Anyone?
__________________
Phil

'67 C10 long fleet.
350/TH350, 4 bbl Carter, K&N, Dual exhaust, loads of stuff coming soon

2001 S10 Blazer Daily Driver, bone stock 4 door 4x4 with manual transmission
Lippyp is offline   Reply With Quote
Old 10-12-2008, 02:44 PM   #3
ChevLoRay
Old Skool Club
 
ChevLoRay's Avatar
 
Join Date: Jun 2001
Location: Benton, AR "The Heart of Arkansas"
Posts: 10,880
Re: Bed size question

Phil, to be honest, you should measure the width of the topper and the length, then compare that to your truck bed.

I once owned a '65 LWB (mid-70s) and I bought a topper for it. The toppers of that era were not as wide (overall) as my truck bed, but it would work. I suspect that the same will apply in your case. Some of the later models (late 80's) had a forward slant to them to conform to the profile of the cabs.

I "THINK" it will work, but you should get a tape measure (what do you English call them) and take note of the dimensions of the topper and your bed, in comparison to the bed on which it is now resting.

NOTE: After looking at the pics you attached, my '65 was the same tan/white, but it had the aluminium trim down each side. It had a chrome front bumper, and I added the bright grille. It also had factory air conditioning (first year offered in the dash) and a V-8 (283). Other that that, it had no P/S or P/B. Still, it was a good truck.....and it currently (last I knew) was on the west coast.
__________________
Member Nr. 2770

'96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed.

'69 C-10 SWB; 350/TH400 - in limbo

The older I get, the better I was.

Last edited by ChevLoRay; 10-12-2008 at 02:48 PM.
ChevLoRay is offline   Reply With Quote
Old 10-12-2008, 03:07 PM   #4
Lippyp
English Chevy Owner
 
Lippyp's Avatar
 
Join Date: May 2002
Location: Shropshire, UK/ Lot, France
Posts: 1,848
Re: Bed size question

Quote:
Originally Posted by ChevLoRay View Post
I "THINK" it will work, but you should get a tape measure (what do you English call them)
A tape measure!

Thanks, its on a truck for sale on Ebay over here and I'm trying to persuade the guy to part with it seperately so if he agrees I'll get some measurements. It looks like it may be a later top anyway. Would still be easier to make it fit than build one from scratch which is my other option at the moment.
__________________
Phil

'67 C10 long fleet.
350/TH350, 4 bbl Carter, K&N, Dual exhaust, loads of stuff coming soon

2001 S10 Blazer Daily Driver, bone stock 4 door 4x4 with manual transmission
Lippyp is offline   Reply With Quote
Old 11-02-2008, 11:31 AM   #5
Lippyp
English Chevy Owner
 
Lippyp's Avatar
 
Join Date: May 2002
Location: Shropshire, UK/ Lot, France
Posts: 1,848
Re: Bed size question

OK, now I'm looking in the opposite direction, I've found a DVOR Fibreglass hardtop that came from a late 70's chevy, on UK ebay very very cheap, its definitely an eight footer but again anyone know how much the bed sizes differed from a 67-72 to a 73 up truck? I didn't really want a 'glass top as it looks a bit to modern but needs must if I can't find an alumnium/steel one then this will have to do. On the plus side I guess at least it shouldn't leak anywhere. It needs some cleaning and tidying as its been sat on top of someones shed under a tree for years apparently and the wooden rail inside needs replacing.

The downside is it's in a place called Oban in the Scottish Highlands which is a 610 mile round trip to collect it.

__________________
Phil

'67 C10 long fleet.
350/TH350, 4 bbl Carter, K&N, Dual exhaust, loads of stuff coming soon

2001 S10 Blazer Daily Driver, bone stock 4 door 4x4 with manual transmission

Last edited by Lippyp; 11-02-2008 at 11:37 AM.
Lippyp is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:13 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com