Buddy Bucket Parts - Buddy seats, tracks, clamps - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chevy4Life · 10-01-2008, 11:48 AM

I have a couple extra Buddy seats I'd like to get out of the way.

1. 1967 CST Buddy seat. The bottom seat is missing (basically a piece of 1/2" plywood and a couple inch thick piece of foam). The top foam is ok but the wood should be replaced. The PO cut a little notch in the front to add a lock

. Surface rust only. $45 plus $25 shipping to the ConUS.

2. Dodge Buddy seat. The metal part is IDENTICAL to the CST box except for the 4 small holes in the front of the box that will be covered when finished. The top part of the seat looks more square than the CST seat, but it may just be the cover. I used a Dodge seat in my truck. It had a different cover and looks great with new covers (Pics below) $65 plus $25 shipping to the ConUS. SOLD

3. Driver side seat tracks. Off a Dodge seat, but very close to the CST track. The studs are a little longer and the adjuster arm is mounted farther out (Pics of both below). One of the rollers needs to be persuaded back over the nipple. Missing one spring. $40 Shipped to ConUS. SOLD

4. 3 Buddy seat hold down clamps. As a cheap alternative use 3/4" One hole electrical conduit strap. $10 each shipped or all three for $25 Shipped to ConUS.SOLD

If shipping is less than $25 on the Buddy seats I'll refund the difference, if it's more I'll eat it. For shipping outside the ConUS. PM your address for a quote but, if you want to be inline please reply in the thread.

Chevy4Life · 10-01-2008, 11:57 AM

Here is a shot of my seats using a Dodge buddy seat and a shot of Dodge seat tracks reversed on the passenger seat so I can slide it forward for access.

Chevy4Life · 10-02-2008, 02:14 AM

ttt any offers?

olblue60@aol.com · 10-02-2008, 04:30 AM

I would be interested in a pair of the seat tracks. Thanks

John

Chevy4Life · 10-02-2008, 11:00 AM

Quote:

Originally Posted by olblue60@aol.com

I would be interested in a pair of the seat tracks. Thanks

John

I only have the one pair. The pic. is just to show the slight differences. I'll take Paypal or Postal M.O.

Thanks,
Jay

**BIGJAKE97** · 10-02-2008, 12:59 PM

i'll take the three center seat hold downs. -jake

msgross · 10-02-2008, 07:10 PM

dang, John beat me to the seat tracks...

Did you use a chevy frame on your dodge seats? I have a set of dodge seats and might just get some end pieces bent to match the chevy kind...

Chevy4Life · 10-02-2008, 08:19 PM

Quote:

Originally Posted by BIGJAKE97

i'll take the three center seat hold downs. -jake

PM Sent.

Chevy4Life · 10-02-2008, 08:26 PM

Quote:

Originally Posted by msgross

dang, John beat me to the seat tracks...

Did you use a chevy frame on your dodge seats? I have a set of dodge seats and might just get some end pieces bent to match the chevy kind...

Just the center buddy seat is out of a dodge. I ran across two different styles of dodge buddy bucket frames, but I think both could be easily modified as you stated.

Jay

olblue60@aol.com · 10-03-2008, 07:37 AM

Hi Jay,
Thanks for the chance to purchase the tracks. If you can send me your paypal, I'll get payment right out to you.

Chevy4Life · 10-03-2008, 09:37 AM

Quote:

Originally Posted by olblue60@aol.com

Hi Jake,
Thanks for the chance to purchase the tracks. If you can send me your paypal, I'll get payment right out to you.

PM Sent.

Thanks,
Jay

olblue60@aol.com · 10-04-2008, 11:32 AM

Jay
You should find paypal in your mail. Thanks for the nice tracks!

John

Chevy4Life · 10-05-2008, 09:27 AM

ttt- BIGJAKE97 do you still want the clamps?

**BIGJAKE97** · 10-06-2008, 12:00 AM

yes. paypal sent. sorry if i took a little long. thanks, jake

Chevy4Life · 10-06-2008, 07:31 PM

The tracks and clamps both shipped out this morning. Thank you both!

Jay

Chevy4Life · 10-09-2008, 11:07 AM

ttt- I may have a few more clamps if anyone is interested.

Chevy4Life · 10-15-2008, 03:24 PM

ttt

**BIGJAKE97** · 10-23-2008, 12:08 AM

i'm interested in the extra clamps. -jake

olblue60@aol.com · 10-23-2008, 07:16 AM

I got the tracks. They are great. Thanks! If you get a chance to send along the track wire . I would appreciate it. Thanks again for the great parts!

John

wildwilly · 10-23-2008, 08:06 PM

Quote:

Originally Posted by Chevy4Life

Here is a shot of my seats using a Dodge buddy seat and a shot of Dodge seat tracks reversed on the passenger seat so I can slide it forward for access.

What are the seats out of? ... they look way nice,more info please ... just looking for ideas on my project. Thanks.

Chevy4Life · 10-29-2008, 05:07 AM

Quote:

Originally Posted by BIGJAKE97

i'll take the three center seat hold downs. -jake

Sorry guys I missed a few post! BIGJAKE97-Sending you a PM

Chevy4Life · 10-29-2008, 05:12 AM

Quote:

Originally Posted by olblue60@aol.com

I got the tracks. They are great. Thanks! If you get a chance to send along the track wire . I would appreciate it. Thanks again for the great parts!

John

I was waiting for you to respond to my PM and missed this post. I'll get that sent out to you. It blended into my bench and I didn't notice it until 2 days later.

Jay

Chevy4Life · 10-29-2008, 05:16 AM

Quote:

Originally Posted by wildwilly

What are the seats out of? ... they look way nice,more info please ... just looking for ideas on my project. Thanks.

The seats are 1967/1968 Buddy Buckets. I had my upholstery guy add some padding to the sides on the bottom cushion and the back cushion to give them more of a bucket look and feel. Glad you like them I think they turned out great.

Jay

**BIGJAKE97** · 10-30-2008, 02:01 AM

paypal sent for the extra hold downs. thanks, jake

olblue60@aol.com · 11-12-2008, 07:17 AM

Still looking for my missing part for the seat tracks, ????? I sure would like to get this sale finished up.

10-01-2008, 11:48 AM	#1
Chevy4Life Senior Member Join Date: Feb 2003 Location: Las Vegas, NV Posts: 749	Buddy Bucket Parts - Buddy seats, tracks, clamps I have a couple extra Buddy seats I'd like to get out of the way. 1. 1967 CST Buddy seat. The bottom seat is missing (basically a piece of 1/2" plywood and a couple inch thick piece of foam). The top foam is ok but the wood should be replaced. The PO cut a little notch in the front to add a lock. Surface rust only. $45 plus $25 shipping to the ConUS. 2. Dodge Buddy seat. The metal part is IDENTICAL to the CST box except for the 4 small holes in the front of the box that will be covered when finished. The top part of the seat looks more square than the CST seat, but it may just be the cover. I used a Dodge seat in my truck. It had a different cover and looks great with new covers (Pics below) $65 plus $25 shipping to the ConUS. SOLD 3. Driver side seat tracks. Off a Dodge seat, but very close to the CST track. The studs are a little longer and the adjuster arm is mounted farther out (Pics of both below). One of the rollers needs to be persuaded back over the nipple. Missing one spring. $40 Shipped to ConUS. SOLD 4. 3 Buddy seat hold down clamps. As a cheap alternative use 3/4" One hole electrical conduit strap. $10 each shipped or all three for $25 Shipped to ConUS.SOLD If shipping is less than $25 on the Buddy seats I'll refund the difference, if it's more I'll eat it. For shipping outside the ConUS. PM your address for a quote but, if you want to be inline please reply in the thread. Attached Images Last edited by Chevy4Life; 11-18-2009 at 06:31 AM. Reason: update

10-01-2008, 11:57 AM	#2
Chevy4Life Senior Member Join Date: Feb 2003 Location: Las Vegas, NV Posts: 749	Re: Buddy Bucket Parts - Buddy seats, tracks, clamps Here is a shot of my seats using a Dodge buddy seat and a shot of Dodge seat tracks reversed on the passenger seat so I can slide it forward for access. Attached Images

10-02-2008, 02:14 AM	#3
Chevy4Life Senior Member Join Date: Feb 2003 Location: Las Vegas, NV Posts: 749	Re: Buddy Bucket Parts - Buddy seats, tracks, clamps ttt any offers?

10-02-2008, 04:30 AM	#4
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: Buddy Bucket Parts - Buddy seats, tracks, clamps I would be interested in a pair of the seat tracks. Thanks John __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

10-02-2008, 12:59 PM	#6
BIGJAKE97 Senior Member Join Date: May 2005 Location: hayward, ca Posts: 268	Re: Buddy Bucket Parts - Buddy seats, tracks, clamps i'll take the three center seat hold downs. -jake __________________ 67 short fleet 71 blazer 4x4 72 blazer 2wd 76 gmc sierra 3/4t 4x4 62 bel air 01 blazer extreme member 11,943!

10-02-2008, 07:10 PM	#7
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Buddy Bucket Parts - Buddy seats, tracks, clamps dang, John beat me to the seat tracks... Did you use a chevy frame on your dodge seats? I have a set of dodge seats and might just get some end pieces bent to match the chevy kind... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 10-02-2008 at 07:11 PM.

10-03-2008, 07:37 AM	#10
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: Buddy Bucket Parts - Buddy seats, tracks, clamps Hi Jay, Thanks for the chance to purchase the tracks. If you can send me your paypal, I'll get payment right out to you. __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide Last edited by olblue60@aol.com; 10-04-2008 at 11:12 AM.

10-04-2008, 11:32 AM	#12
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: Buddy Bucket Parts - Buddy seats, tracks, clamps Jay You should find paypal in your mail. Thanks for the nice tracks! John __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide Last edited by olblue60@aol.com; 10-04-2008 at 11:32 AM.

10-05-2008, 09:27 AM	#13
Chevy4Life Senior Member Join Date: Feb 2003 Location: Las Vegas, NV Posts: 749	Re: Buddy Bucket Parts - Buddy seats, tracks, clamps ttt- BIGJAKE97 do you still want the clamps?

10-06-2008, 12:00 AM	#14
BIGJAKE97 Senior Member Join Date: May 2005 Location: hayward, ca Posts: 268	Re: Buddy Bucket Parts - Buddy seats, tracks, clamps yes. paypal sent. sorry if i took a little long. thanks, jake __________________ 67 short fleet 71 blazer 4x4 72 blazer 2wd 76 gmc sierra 3/4t 4x4 62 bel air 01 blazer extreme member 11,943!

10-06-2008, 07:31 PM	#15
Chevy4Life Senior Member Join Date: Feb 2003 Location: Las Vegas, NV Posts: 749	Re: Buddy Bucket Parts - Buddy seats, tracks, clamps The tracks and clamps both shipped out this morning. Thank you both! Jay

10-09-2008, 11:07 AM	#16
Chevy4Life Senior Member Join Date: Feb 2003 Location: Las Vegas, NV Posts: 749	Re: Buddy Bucket Parts - Buddy seats, tracks, clamps ttt- I may have a few more clamps if anyone is interested.

10-15-2008, 03:24 PM	#17
Chevy4Life Senior Member Join Date: Feb 2003 Location: Las Vegas, NV Posts: 749	Re: Buddy Bucket Parts - Buddy seats, tracks, clamps ttt

10-23-2008, 12:08 AM	#18
BIGJAKE97 Senior Member Join Date: May 2005 Location: hayward, ca Posts: 268	Re: Buddy Bucket Parts - Buddy seats, tracks, clamps i'm interested in the extra clamps. -jake __________________ 67 short fleet 71 blazer 4x4 72 blazer 2wd 76 gmc sierra 3/4t 4x4 62 bel air 01 blazer extreme member 11,943!

10-23-2008, 07:16 AM	#19
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: Buddy Bucket Parts - Buddy seats, tracks, clamps I got the tracks. They are great. Thanks! If you get a chance to send along the track wire . I would appreciate it. Thanks again for the great parts! John __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide



Register or Log In To remove these advertisements.

10-30-2008, 02:01 AM	#24
BIGJAKE97 Senior Member Join Date: May 2005 Location: hayward, ca Posts: 268	Re: Buddy Bucket Parts - Buddy seats, tracks, clamps paypal sent for the extra hold downs. thanks, jake __________________ 67 short fleet 71 blazer 4x4 72 blazer 2wd 76 gmc sierra 3/4t 4x4 62 bel air 01 blazer extreme member 11,943!

11-12-2008, 07:17 AM	#25
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: Buddy Bucket Parts - Buddy seats, tracks, clamps Still looking for my missing part for the seat tracks, ????? I sure would like to get this sale finished up. __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.