brake problem - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gafiredog · 11-23-2008, 05:03 PM

hey guys, need your help! i bought a 1975 c-10 step, one owner, out of a barn. been sitting for 7 years. got it running no problems, did a complete brake job, new wheel cyl. , new calipers, new master cyl. everything new. my problem is i'm getting good line pressure to all the wheels except the L. front. the pedal has to be pushed really hard to get fluid to come out the bleeder. after bleeding it, & tighten the bleeder valve, then pump the pedal, the caliper won't release the rotor to turn freely. it only does this on the L. front. the only thing i can figure is the pressure valve on the very front cross member under the radaitor is bad. any ideas ???? thanks guys, Art

Jonboy · 11-23-2008, 07:15 PM

Did you replace the brake hoses? Could be a collapsed hose.

ont_guy_38 · 11-23-2008, 07:16 PM

You change the front rubber lines? . If not i,m betting that is your problem
You beat me Jonboy....lol

gafiredog · 11-23-2008, 08:26 PM

Quote:

Originally Posted by ont_guy_38

You change the front rubber lines? . If not i,m betting that is your problem
You beat me Jonboy....lol

no, i didn't , i will do that this week, thanks guys, hope you're right. Art

joe231 · 11-23-2008, 09:45 PM

brake hose
i'd do them both to save the hassle of having to replace the other one later on

11-23-2008, 05:03 PM	#1
gafiredog Registered User Join Date: May 2008 Location: metro Atlanta, Ga. Posts: 196	brake problem hey guys, need your help! i bought a 1975 c-10 step, one owner, out of a barn. been sitting for 7 years. got it running no problems, did a complete brake job, new wheel cyl. , new calipers, new master cyl. everything new. my problem is i'm getting good line pressure to all the wheels except the L. front. the pedal has to be pushed really hard to get fluid to come out the bleeder. after bleeding it, & tighten the bleeder valve, then pump the pedal, the caliper won't release the rotor to turn freely. it only does this on the L. front. the only thing i can figure is the pressure valve on the very front cross member under the radaitor is bad. any ideas ???? thanks guys, Art __________________ Art 1975 c-10 stepper 1978 single cab dually 1987 crewcab dually 1986 crewcab single wheel 1948 anglia- (the dixie twister super gas)

11-23-2008, 07:15 PM	#2
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: brake problem Did you replace the brake hoses? Could be a collapsed hose.

11-23-2008, 07:16 PM	#3
ont_guy_38 Registered User Join Date: Jul 2007 Location: Ontario Canada Posts: 1,006	Re: brake problem You change the front rubber lines? . If not i,m betting that is your problem You beat me Jonboy....lol Last edited by ont_guy_38; 11-23-2008 at 07:17 PM.

11-23-2008, 09:45 PM	#5
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: brake problem brake hose i'd do them both to save the hassle of having to replace the other one later on __________________ *CHEVY ONLY*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.