The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-06-2003, 11:27 PM   #1
71-longbed
Its Magically Delicious
 
71-longbed's Avatar
 
Join Date: Jan 2003
Location: oregon
Posts: 2,398
Question brake question

my truck kinda hops when i apply the brake ..... i thought maybe 1 of my rotors needed resurfacing ....but they look good

any suggestions ???
71-longbed is offline   Reply With Quote
Old 02-07-2003, 12:52 AM   #2
crazy longhorn
Fabricate till you "puke"
 
Join Date: Jun 2002
Location: Ill
Posts: 9,402
you could have a warped rotor or drum, that would be something you would feel as a pulsing of the brake peddle, & will also feel like a shake, or vibration when the brakes are applied. good luck, crazyL
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....
crazy longhorn is offline   Reply With Quote
Old 02-21-2003, 08:23 PM   #3
71-longbed
Its Magically Delicious
 
71-longbed's Avatar
 
Join Date: Jan 2003
Location: oregon
Posts: 2,398
thanks for the input
71-longbed is offline   Reply With Quote
Old 02-24-2003, 02:56 AM   #4
outlaw
Registered User
 
Join Date: Dec 2002
Location: Leesville, Louisiana
Posts: 80
the best thing to do is have both rotors turned and replace brake pads, rotor warpage is not something that you can see with your eyes and once the brake pads get a certain wear pattern they keep that pattern so change the pads to
Danny
outlaw is offline   Reply With Quote
Old 02-24-2003, 01:15 PM   #5
68LSS1
Registered User
 
68LSS1's Avatar
 
Join Date: Dec 2002
Location: Tampa
Posts: 1,191
Quote:
rotor warpage is not something that you can see with your eyes
Sure you can. Use a dial indicator. We should all have one of these with a base, right?
68LSS1 is offline   Reply With Quote
Old 02-24-2003, 07:26 PM   #6
82 Silverado 4X
Genuine Chevrolet
 
82 Silverado 4X's Avatar
 
Join Date: Feb 2003
Location: South West Pennsylvania.
Posts: 582
Are you sure it's the front brakes and not the back? Sometimes a combination of a leaky wheel cylinder and loose spring bushings will make it hop irratically when the brakes are hit hard.
FYI to all
Harbor Freight has Indicators and Magnetic Bases on sale from time to time in their catalogs.
1" Travel .001 Dial Indicator on sale for $6.49
Magnetic base for Travel Indicator on sale for $6.99
The indicators are accurate and the mag base is identical to the one I just paid $22.00 for thru MSC.
A mag base and travel indicator is a great thing to have in any tool box.
__________________
George
82 Silverado LWB 4x4 350 SM465 NP208
77 Chevrolet Blazer Chalet 400 TH350 NP203
82 Silverado 4X is offline   Reply With Quote
Old 02-24-2003, 07:31 PM   #7
71-longbed
Its Magically Delicious
 
71-longbed's Avatar
 
Join Date: Jan 2003
Location: oregon
Posts: 2,398
im not sure if its front or back or a combination like you suggested .... i did try only braking with my parking brake which i know only applies the rear drums .... i didn't notice any pulsating or hoppin.... is this a good way to troubleshoot the problem or is there something im not aware of ....

thanks again for all the input

it helps alot
__________________
71 C10 LWB
350sbc -TH350
12 bolt 3.42 Posi



Of all my favorite things to do, The utmost is to have a brew.
My love grows for my foamy friend, with each thirst-quenching elbow bend.
Beer so frosty, smooth, and cold it's paradise pure liquid gold.
Yes beer means many things to me that's all for now cus I gotta pee.
71-longbed is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:45 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com