![]() |
![]() |
#1 |
Registered User
Join Date: Nov 2001
Location: Harvest, AL 35749
Posts: 337
|
![]()
On my 81 K5 4x4 I've noticed my brakes acting funny the last couple of days. After I've come to a complete stop at a stop light I noticed the pedal will start moving towards the floor. The brakes also seem softer. Checked pads and shoes last night. They look fine. No leaks at wheel cylinder, brake lines or master cylinder.
My Ford buddy thinks the master cylinder is going out. They're only about 30 bucks, but I don't like to fix it if it ain't broke. The problem could also be the check valve on the power booster or the other valve coming off the rear of the intake. Anyone had similar problems?? Thanks
__________________
1981 K5 Blazer 305, 4spd, 4x4, 4" Lift, custom bumpers, Warn 9.5 Ti Winch 1995 T10 Blazer 4.3L 4x4 (Son's) 2004 GMC Envoy 4.2L 2WD 2005 GMC Sierra Crew Cab Z71 4x4 5.3L 240 Fun Finder Travel Trailer Harvest, AL 35749 |
![]() |
![]() |
![]() |
#2 |
I Got My Engine!!!!!
Join Date: Oct 2002
Location: Palmer, AK
Posts: 254
|
Yeah, sound to me like your booster is going bad. Mikes site has a good article on what it will do when its going bad and how to check and replace it. Heres the address http://www.73-87.com/garage/booster.htm
Hope that helps, Cameron
__________________
F.O.R.D. "F*cked Over Rebuilt Dodge" -+-+-+-+Cameron+-+-+-+- 1987 GMC HIGH SIERRA LWB 1500 32X11.50 383 TBI/Vortec Heads/Intake MSD Ignition Dual Exhaust Custom Pinstriping Sweet interior & stereo http://www.cgalvin29.freehomepage.com |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Nov 2001
Location: Harvest, AL 35749
Posts: 337
|
Thanks for the info. I don't think it's the booster, but I'll look for vacuum leaks. Just bought a master cylinder and rear brake shoes. I'd be curious to see if anyone else has had to replace their master cylinder and what it's symptoms are.
__________________
1981 K5 Blazer 305, 4spd, 4x4, 4" Lift, custom bumpers, Warn 9.5 Ti Winch 1995 T10 Blazer 4.3L 4x4 (Son's) 2004 GMC Envoy 4.2L 2WD 2005 GMC Sierra Crew Cab Z71 4x4 5.3L 240 Fun Finder Travel Trailer Harvest, AL 35749 |
![]() |
![]() |
![]() |
#4 |
Account Suspended
Join Date: Nov 2002
Location: Winnipeg, Manitoba, Canada
Posts: 798
|
My vote is master cylinder. I did mine a few years back.
Symptons were exactly like yours. Stop at a light (pulling my trailer no less). Foot would slowly go to the floor until it would go no farther. Then the truck would start to roll. I'd have to do a quick pump on the brakes to keep from rolling too far ahead, or into the guy in front of me. She still always stopped when I need to, but I replace the cylinder before it got too bad. Problem solved. That's my $.02 ![]() ![]() ![]() |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Nov 2001
Location: Harvest, AL 35749
Posts: 337
|
Thanks Zilverado. I'm glad to hear comments like that before I replace a part for no reason.
__________________
1981 K5 Blazer 305, 4spd, 4x4, 4" Lift, custom bumpers, Warn 9.5 Ti Winch 1995 T10 Blazer 4.3L 4x4 (Son's) 2004 GMC Envoy 4.2L 2WD 2005 GMC Sierra Crew Cab Z71 4x4 5.3L 240 Fun Finder Travel Trailer Harvest, AL 35749 |
![]() |
![]() |
![]() |
#6 | |
Account Suspended
Join Date: Nov 2002
Location: Winnipeg, Manitoba, Canada
Posts: 798
|
Quote:
And I agree, that's what makes this such a great place to hang out and seek advice. ![]() ![]() ![]() |
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Dec 2002
Location: Cactus Patch So. Az
Posts: 4,749
|
Yes a very good sign that the seals in the master cylinder are leaking internally, go with a good new one I would stay away from rebuilds if your life depends on excellent brakes !
__________________
53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42 |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Nov 2001
Location: Harvest, AL 35749
Posts: 337
|
I got the new Master Cylinder put on Friday night. Swapped out the rear brakes while I was there. All systems back to normal. Thanks for the inputs
Tim
__________________
1981 K5 Blazer 305, 4spd, 4x4, 4" Lift, custom bumpers, Warn 9.5 Ti Winch 1995 T10 Blazer 4.3L 4x4 (Son's) 2004 GMC Envoy 4.2L 2WD 2005 GMC Sierra Crew Cab Z71 4x4 5.3L 240 Fun Finder Travel Trailer Harvest, AL 35749 |
![]() |
![]() |
![]() |
#9 |
Account Suspended
Join Date: Nov 2002
Location: Winnipeg, Manitoba, Canada
Posts: 798
|
Excellent - glad to hear it worked out for ya. Always feels good to get things working well again - - especially brakes.
![]() ![]() ![]() |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Dec 2002
Location: Cactus Patch So. Az
Posts: 4,749
|
The brake system is one area that I want the newest or best parts I can find, when you want to use them 100% YOU need them to work 100%
Glad to hear that you went with a new master cylinder.
__________________
53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42 |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|