12-09-2008, 02:08 AM | #1 |
Registered User
Join Date: Oct 2007
Location: Sherwood Oregon
Posts: 1,908
|
Custom Inner Fenders
I need to put some sort of inner fender in my truck, but don't really like the stock ones. Has anyone done anything custom? I know some guys make them so they can be aired all the way out, but I just need them to keep water/dirt out. Any pics?
|
12-09-2008, 09:03 AM | #2 |
Registered User
Join Date: Nov 2006
Location: high point nc
Posts: 442
|
Re: Custom Inner Fenders
i know that some guys use trailer fenders for inners, and that Scotts hot rods is in the process of making some that will lay out 22s. Dosen't seem that this is what your wanting though.
|
12-09-2008, 10:17 AM | #3 |
Active Member
Join Date: Jul 2007
Location: Centrally located between Houston, Austin and Waco. BCS area.
Posts: 7,947
|
Re: Custom Inner Fenders
Did I see some made out of fiberglass once???
I'm not crazy about them either. Seem too bulky and are good collectors of rust causing debris. I would think if you fabricate one, it would have to provide some sort of support for the fender, though. |
12-09-2008, 11:16 AM | #4 |
Active Member
Join Date: Dec 2005
Location: Bethlehem, PA
Posts: 346
|
Re: Custom Inner Fenders
I'm thinking of taking the inside the bed tubs from a fleetside and seeing if I can modify them to work.
Any thoughts?
__________________
The older I get, the faster I was!! |
12-09-2008, 11:41 AM | #5 |
Registered User
Join Date: Oct 2007
Location: Sherwood Oregon
Posts: 1,908
|
Re: Custom Inner Fenders
I think using the bed tubs would be like using the trailer fenders, but more original looking. Cool idea. Ya I don't need to lay out with big wheels, I just don;t like the look. And they take up lot of valuable space, I would like to run some turbochargers one day, and theres lots of room for that if the fenders are out. Chris Alstons' Chassiworks makes some cool inner fenders for Chevy II's, has anyone done something like that?
|
12-09-2008, 02:25 PM | #6 |
Registered User
Join Date: Sep 2003
Location: Boise ID
Posts: 609
|
Re: Custom Inner Fenders
I took two pair and made one pair. They are 6" wider than the originals. Think of the size of wheel I could put back there!!!
Gary
__________________
"72" Red CORVETTE 4-speed 350 "70" Chevy Short Bed early stages of resto. Edel 600 cfm carb Weiand Stealth Intake HEI shorty Headers 4/2 Drop 295 50R 15 TOYO on 10 inch wide corvette rally rims at all 4 corners. "CHEVY RULES" |
12-09-2008, 05:48 PM | #7 |
I am a Referee of life.
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,992
|
Re: Custom Inner Fenders
Classic Trucks has an article in the Jan 09 issue where they did fronts.This was on a Furd but the concept is the same.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" |
12-09-2008, 06:39 PM | #8 |
Registered User
Join Date: Aug 2007
Location: pittsburgh pa
Posts: 1,970
|
Re: Custom Inner Fenders
Here are the ones my friends hot rod shop made for my 64... Going to do the same for my 67 and then my 68 if I dropmember it too...
__________________
68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile |
12-09-2008, 08:58 PM | #9 |
Registered User
Join Date: Oct 2007
Location: Sherwood Oregon
Posts: 1,908
|
Re: Custom Inner Fenders
Those look good. I am thinking more along the lines of this
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|