My 65 Build - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FreeRideYZ250 · 02-21-2009, 08:08 PM

More progress: Fenderwells and core support.

FreeRideYZ250 · 02-21-2009, 08:18 PM

And it goes on:

Hood hinges primed. Water pump, pulley and distributor installed. Fuel and ignition parts.

Now its time to watch some supercross and Nationwide racing.

won't be long until I can:

Iron-Butt · 12-20-2008, 03:12 AM

Great Work.

FreeRideYZ250 · 12-25-2008, 09:54 PM

Hope everyone had a great christmas. I know I did. SummitCluase showed up yesterday, and my girlfriend wrapped all my self picked out presents up for me.

Milodon Re Inforced timing chain cover. Milodon 7 quart oil pan and pick up. Intake bolts, cam button, degree bushings, rear main seal, sfi flexplate, and last but not least, the Comp Cams Mutha Thumpr Retro fit cam and lifter kit.

Cam and lifters will be here tuesday. Hopefully assemble the mill next week. 40 over 350 with stock rotating assembly, hyper utectic flat top pistons, 492 LT1 heads with stainless valves and z28 springs. Should run alright for a little street cruiser.

Strodder · 12-26-2008, 08:59 PM

Nice work. Keep posting pictures.

FreeRideYZ250 · 12-30-2008, 12:27 AM

Pulled the block and the heads out today. Painted them up. Five coats of color and five coats of clear. Duplicolor engine enamel. As I was cleaning up late in the evening, summitclause showed up with the rest of my christmas present. Awesome!

FreeRideYZ250 · 12-30-2008, 12:31 AM

Got an itch to see what the mill will look like when its all put together. So I mocked up some of the parts I have for it.

Alan's Classic · 02-21-2009, 11:24 AM

I was wondering what happened to you. Glad to see your back at it.

joe231 · 02-22-2009, 12:15 PM

nice work!!!

this is a very cool idea

might have to steal it

FreeRideYZ250 · 02-22-2009, 12:18 PM

Quote:

Originally Posted by joe231

nice work!!!

this is a very cool idea

might have to steal it

1-1/4" electrical conduit bought at HD. Its big enough for the main harness plug to fit through, yet small enough to fit in that notch in the fenderwell.

lenguini · 10-12-2011, 12:14 PM

Hi...Id like to use your idea,just wondering where you located and cut the hole in the firewall for the harness to meet up with the conduit ?

Thanks,
Ed

lenguini · 10-12-2011, 12:15 PM

Hi...Id like to use your idea,just wondering where you located and cut the hole in the firewall for the harness to meet up with the under fender conduit ?

Thanks,
Ed

AngelFireCustoms · 03-30-2017, 02:32 AM

Long time no post! Even forgot my login and password. That truck hasn't made much progress, however, I have a new build (not g pa's truck) that I am acquiring parts for. Soon will start a new build thread. It is a 66 short bed, full air ride, custom rear frame clip, lots of fun to come. Life got in my way for a while! A long while! This new build I will keep up on. Have almost all the parts and pieces already. Hope you guys will like it. I will title the new one AFC 66 Short Bed. Cheers!

AngelFireCustoms · 02-23-2018, 02:07 AM

Quote:

Originally Posted by AngelFireCustoms

Long time no post! Even forgot my login and password. That truck hasn't made much progress, however, I have a new build (not g pa's truck) that I am acquiring parts for. Soon will start a new build thread. It is a 66 short bed, full air ride, custom rear frame clip, lots of fun to come. Life got in my way for a while! A long while! This new build I will keep up on. Have almost all the parts and pieces already. Hope you guys will like it. I will title the new one AFC 66 Short Bed. Cheers!

Peanut gallery has left the building. Dino? I know you are still around. New build pics coming shortly. As soon as I find time to go from phone to pc to website to blah blah. However. CnC frame rails have come out sick. I suck at patch panel work. Captain fab is sending me his delish parts for steering and breaks. Bump steer tie rod set up available for the bump steer needing folks. Custom sleeve, bored for inner tie rod, and outer heim joint, comes complete with sleeve, high articulation chromoly heim joint, jam nuts, and spindle bolt. Can also include inner tie rod, and drill bit to ream spindle. This modification allows the tie rod to be mounted on the underside of the spindle to correct bump steer in lowered trucks.

AngelFireCustoms · 02-23-2018, 02:11 AM

Quote:

Originally Posted by lenguini

Hi...Id like to use your idea,just wondering where you located and cut the hole in the firewall for the harness to meet up with the under fender conduit ?

Thanks,
Ed

I welded in the conduit, and then eyeball engineered the 2" diameter hole to match, I know I am a few - 7 years late. sorry, just got back into this website.

joe231 · 02-22-2009, 12:25 PM

Iron-Butt · 02-22-2009, 05:01 PM

great work.

Joey~AP · 02-23-2009, 03:56 PM

Mad skillz, dude!

66Z71 · 02-23-2009, 06:12 PM

I don't know how I've missed this tread. That's going to be a nice truck. I love the color.

Eric

TwiggyTheDrummer · 02-23-2009, 09:15 PM

Great looking progress on it. I too got mine from my Grandpa but luckily I didn't have to pay for it. Just the money to do what I'm doing now. Maybe I'll be able to find some more old pics of the truck from when he bought it much like yours.

joe231 · 02-24-2009, 11:18 PM

Looking Good!!!!

joe231 · 02-24-2009, 11:45 PM

couldn't help it....sorry

protrash64 · 02-24-2009, 11:53 PM

.........its my fault YZ250.

Barebones66 · 02-24-2009, 11:59 PM

good progress

question is when you gonna fix the garage door spring ? lol nice brace, just like a painter

FreeRideYZ250 · 02-25-2009, 09:39 AM

Quote:

Originally Posted by Barebones66

good progress

question is when you gonna fix the garage door spring ? lol nice brace, just like a painter

Nice notice of the brace. The garage door springs actually work decent for a 30 year old garage door. They just don't like it when I hang things on the door, it sags down a bit. Being 6'2" I need the door all the way up, or I have to wear a helment when I'm working.

The door shuts just enough to where its above eye sight line, however its low enough I will whack my head on it.

02-21-2009, 08:08 PM	#1
FreeRideYZ250 Registered User Join Date: Oct 2008 Location: Phoenix, AZ Posts: 67	Re: My 65 Build More progress: Fenderwells and core support. Attached Images

02-21-2009, 08:18 PM	#2
FreeRideYZ250 Registered User Join Date: Oct 2008 Location: Phoenix, AZ Posts: 67	Re: My 65 Build And it goes on: Hood hinges primed. Water pump, pulley and distributor installed. Fuel and ignition parts. Now its time to watch some supercross and Nationwide racing. won't be long until I can: Attached Images

12-20-2008, 03:12 AM	#3
Iron-Butt 454 club Join Date: Oct 2002 Location: Oklahoma Posts: 1,348	Re: My 65 Build Great Work. __________________ David 1965 Chevrolet c-10 454 automatic Custom bbw swb. 1965 Chevrolet C-10 swb (Sold) 1963 Chevrolet C-10 6 Cyl automatic with dual exhaust, pb, ps and 17's. R.I.P "I will miss you. 1967 Chevrolet C-10 6 Cyl Custom lwb 1939 Chevrolet Coupe, 350 v8 automatic. 1935 Chevrolet 2 Dr Standard in the works. 2015 Harley Davidson Street Glide. 2023 Chevrolet Stingray Z51 Convertible. I never want to grow up.

12-25-2008, 09:54 PM	#4
FreeRideYZ250 Registered User Join Date: Oct 2008 Location: Phoenix, AZ Posts: 67	Re: My 65 Build Hope everyone had a great christmas. I know I did. SummitCluase showed up yesterday, and my girlfriend wrapped all my self picked out presents up for me. Milodon Re Inforced timing chain cover. Milodon 7 quart oil pan and pick up. Intake bolts, cam button, degree bushings, rear main seal, sfi flexplate, and last but not least, the Comp Cams Mutha Thumpr Retro fit cam and lifter kit. Cam and lifters will be here tuesday. Hopefully assemble the mill next week. 40 over 350 with stock rotating assembly, hyper utectic flat top pistons, 492 LT1 heads with stainless valves and z28 springs. Should run alright for a little street cruiser. Attached Images

12-26-2008, 08:59 PM	#5
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: My 65 Build Nice work. Keep posting pictures.

12-30-2008, 12:27 AM	#6
FreeRideYZ250 Registered User Join Date: Oct 2008 Location: Phoenix, AZ Posts: 67	Re: My 65 Build Pulled the block and the heads out today. Painted them up. Five coats of color and five coats of clear. Duplicolor engine enamel. As I was cleaning up late in the evening, summitclause showed up with the rest of my christmas present. Awesome! Attached Images

12-30-2008, 12:31 AM	#7
FreeRideYZ250 Registered User Join Date: Oct 2008 Location: Phoenix, AZ Posts: 67	Re: My 65 Build Got an itch to see what the mill will look like when its all put together. So I mocked up some of the parts I have for it. Attached Images

02-21-2009, 11:24 AM	#8
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: My 65 Build I was wondering what happened to you. Glad to see your back at it. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

02-22-2009, 12:15 PM	#9
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My 65 Build nice work!!! this is a very cool idea might have to steal it __________________ *CHEVY ONLY*

10-12-2011, 12:14 PM	#11
lenguini Registered User Join Date: Oct 2010 Location: Kelowna B.C. Posts: 743	Re: My 65 Build Hi...Id like to use your idea,just wondering where you located and cut the hole in the firewall for the harness to meet up with the conduit ? Thanks, Ed

10-12-2011, 12:15 PM	#12
lenguini Registered User Join Date: Oct 2010 Location: Kelowna B.C. Posts: 743	Re: My 65 Build Hi...Id like to use your idea,just wondering where you located and cut the hole in the firewall for the harness to meet up with the under fender conduit ? Thanks, Ed

03-30-2017, 02:32 AM	#13
AngelFireCustoms Registered User Join Date: Mar 2017 Location: Phoenix Posts: 7	Re: My 65 Build Long time no post! Even forgot my login and password. That truck hasn't made much progress, however, I have a new build (not g pa's truck) that I am acquiring parts for. Soon will start a new build thread. It is a 66 short bed, full air ride, custom rear frame clip, lots of fun to come. Life got in my way for a while! A long while! This new build I will keep up on. Have almost all the parts and pieces already. Hope you guys will like it. I will title the new one AFC 66 Short Bed. Cheers!

02-22-2009, 12:25 PM	#16
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My 65 Build __________________ *CHEVY ONLY*

02-22-2009, 05:01 PM	#17
Iron-Butt 454 club Join Date: Oct 2002 Location: Oklahoma Posts: 1,348	Re: My 65 Build great work. __________________ David 1965 Chevrolet c-10 454 automatic Custom bbw swb. 1965 Chevrolet C-10 swb (Sold) 1963 Chevrolet C-10 6 Cyl automatic with dual exhaust, pb, ps and 17's. R.I.P "I will miss you. 1967 Chevrolet C-10 6 Cyl Custom lwb 1939 Chevrolet Coupe, 350 v8 automatic. 1935 Chevrolet 2 Dr Standard in the works. 2015 Harley Davidson Street Glide. 2023 Chevrolet Stingray Z51 Convertible. I never want to grow up.

02-23-2009, 03:56 PM	#18
Joey~AP TexasBowhunter Join Date: Mar 2008 Location: alvin, texas Posts: 450	Re: My 65 Build Mad skillz, dude! __________________ Build in progress for son's first truck.



Register or Log In To remove these advertisements.

02-23-2009, 06:12 PM	#19
66Z71 Registered User Join Date: Feb 2009 Location: Milwaukie, Oregon Posts: 204	Re: My 65 Build I don't know how I've missed this tread. That's going to be a nice truck. I love the color. Eric

02-23-2009, 09:15 PM	#20
TwiggyTheDrummer Keep It Simple Stupid.. Nope.. Join Date: Jan 2009 Location: Live Oak, FL Posts: 665	Re: My 65 Build Great looking progress on it. I too got mine from my Grandpa but luckily I didn't have to pay for it. Just the money to do what I'm doing now. Maybe I'll be able to find some more old pics of the truck from when he bought it much like yours. __________________ 1963 GMC SWB Fleetside in Sunburst Orange Metallic 305E V6 w/ Plaid VC, Powerglide, BOSS 313 20" Chrome Wheels, Kumho Ecsta STX 275/45/R20's, Alpine/Clarion System, Dynomax Exhaust Old custom classic trucks have soul. Their dashboards aren't plastic, and they've survived both the best and worst of what the 20th century had to offer. For the owners of these trucks, it's often the same story. Through both good and bad times they persevered, until one day they could turn the key and roll up in a customized truck everyone with good taste would admire. – Custom Classic Trucks

02-24-2009, 11:18 PM	#21
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My 65 Build Looking Good!!!! __________________ *CHEVY ONLY*

02-24-2009, 11:45 PM	#22
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My 65 Build couldn't help it....sorry __________________ *CHEVY ONLY*

02-24-2009, 11:53 PM	#23
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: My 65 Build .........its my fault YZ250. __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

02-24-2009, 11:59 PM	#24
Barebones66 Registered User Join Date: Feb 2009 Location: Dirt Coast Posts: 88	Re: My 65 Build good progress question is when you gonna fix the garage door spring ? lol nice brace, just like a painter Attached Images __________________ 1st project 66 SWB Dave

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.