10 inch wide corvette rally's - The 1947 - Present Chevrolet & GMC Truck Message Board Network

keith nohner · 12-17-2008, 11:35 PM

Will 10 inch wide, 4.5 inch backspacing wheel vintiques truck rallys fit on a step side shortbox 1/2 ton two wheel drive pickup without clearance issues.

ChevLoRay · 12-18-2008, 10:49 AM

I have 15x8's with 4-inch backspace on the front, following a disc conversion. In the rear, I'm running 15x10's with a 5-inch backspace. The '67-69 rear axle width is narrower than the '70-72. I've read that someone running the later axle found that the wheels stuck out to the edge of the fenders when running a 5-inch backspace.

12-17-2008, 11:35 PM	#1
keith nohner Registered User Join Date: Oct 2006 Location: Thief River Falls Mn Posts: 30	10 inch wide corvette rally's Will 10 inch wide, 4.5 inch backspacing wheel vintiques truck rallys fit on a step side shortbox 1/2 ton two wheel drive pickup without clearance issues.

12-18-2008, 10:49 AM	#2
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: 10 inch wide corvette rally's I have 15x8's with 4-inch backspace on the front, following a disc conversion. In the rear, I'm running 15x10's with a 5-inch backspace. The '67-69 rear axle width is narrower than the '70-72. I've read that someone running the later axle found that the wheels stuck out to the edge of the fenders when running a 5-inch backspace. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.