WTT 17 Type TQ wheels/ties for truck rally's+cash - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MarkMark · 01-07-2009, 02:51 PM

Im in the mood for a more original look for my truck right now. So I'm looking to trade my Chrome 17 inch Type TQ wheels and general Grabber 255/60 for a set of truck rally's plus a little cash. Tires have plenty of meat left. only had about 3k put on them. A 15x10/8 setup would be nice but 15x8 all around would be fine. Need to have good tires, beauty rings and caps. Take a look.

I have the center cap to this one in the cab. took wheels off last week for a good cleanin and forgot to put it back on.

jorgensensc · 01-07-2009, 02:54 PM

im interested.

MarkMark · 01-07-2009, 03:04 PM

Quote:

Originally Posted by jorgensensc

im interested.

Ok. what do you have for trade and do you have any pictures?
thanks

**70cst** · 01-07-2009, 03:35 PM

Keep in mind that if your truck is lowered the 15x8 might rub on the front lower control arms. I have a 2/4 drop and my 15x8 GM Ralleys rub in the front. I swiched to TT II's 16x8'.

LUV2XCLR8 · 01-07-2009, 03:44 PM

I have a set of 17" Wheel Vintiques Corvette Rally's with
SS trim rings and police caps. My tires might be 2 low of
a profile for you, or maybe we could just swap out rims?

Pictures of Rally's on my Jimmy

MarkMark · 01-07-2009, 04:43 PM

Quote:

Originally Posted by LUV2XCLR8

I have a set of 17" Wheel Vintiques Corvette Rally's with
SS trim rings and police caps. My tires might be 2 low of
a profile for you, or maybe we could just swap out rims?

Pictures of Rally's on my Jimmy

Your tires are defiantly to low profile. I'm kinda feeling the look of the wheel though. Im gonna have to think about it. whats the width?

Also my truck is lowered 2/2 as of now but i planed on dropping it to 3.5/5 soon. I wasn't aware that there were rubbing issues with the rally's. Where do they rub? would different series/profile tires fix it?

thanks

LUV2XCLR8 · 01-07-2009, 05:27 PM

Mine don't rub anywhere, that truck is bagged and is around
a 5/7 drop aired out. Their website says they are 8" wide

jorgensensc · 01-07-2009, 06:03 PM

I have a extremely nice set of ralleys with great caps and rings with almost new BF Goodrich tires (not all terrain)255/70 15. They are 15 x 8 with standard 4" backspacing. What size are your wheels and backspacing. Who makes them? Any other info would be good. This is what they looked like when I purchased them from a board member. THey haven't been driven on at all since I got them. They have just been on my torn apart project, getting rolled around the shop.

Shawn

MarkMark · 01-07-2009, 06:30 PM

Quote:

Originally Posted by jorgensensc

I have a extremely nice set of ralleys with great caps and rings with almost new BF Goodrich tires (not all terrain)255/70 15. They are 15 x 8 with standard 4" backspacing. What size are your wheels and backspacing. Who makes them? Any other info would be good. This is what they looked like when I purchased them from a board member. THey haven't been driven on at all since I got them. They have just been on my torn apart project, getting rolled around the shop.

Shawn

I bought my truck with these wheels on it. there is a stamp on the inside that says type TQ, i googled 17'' type TQ and this is what i found.

http://www.twe-inc.com/tqspecs.php

they are 17x7 5x5 4.25 bs

white72c10 · 01-07-2009, 06:50 PM

Willing to sell the rims outright? If so how much shipped

MarkMark · 01-07-2009, 08:15 PM

Quote:

Originally Posted by white72c10

Willing to sell the rims outright? If so how much shipped

Well, I have nothing to replace them with at the moment.

**70cst** · 01-07-2009, 09:21 PM

Quote:

Originally Posted by LUV2XCLR8

Mine don't rub anywhere, that truck is bagged and is around
a 5/7 drop aired out. Their website says they are 8" wide

All I know is I have a 2/4 drop and and the LCA do rub my wheels. Some say the LCA are issues while others don't have have this issue. I cannot use factory 15x8 GM Ralleys. It's posssible that MarkMark won't have an issue but it's good to be aware of this possible issue. It would be a bummer to switch and then not be able to use the Rally rims.I believe it has to do with back spacing.

MarkMark · 01-07-2009, 10:26 PM

Quote:

Originally Posted by LUV2XCLR8

I have a set of 17" Wheel Vintiques Corvette Rally's with
SS trim rings and police caps. My tires might be 2 low of
a profile for you, or maybe we could just swap out rims?

Pictures of Rally's on my Jimmy

sent you a PM!!

jorgensensc · 01-08-2009, 02:47 PM

I think I will hang on to the ralleys for now. I was hoping to stay with the 8" width. For what it is worth the ralleys did hit the edge of the spindle. I used a grinder and knocked about 1/8" off of the edge of the spindle (it is really thick here) and it worked fine.
SHawn

MarkMark · 01-08-2009, 10:00 PM

Quote:

Originally Posted by jorgensensc

I think I will hang on to the ralleys for now. I was hoping to stay with the 8" width. For what it is worth the ralleys did hit the edge of the spindle. I used a grinder and knocked about 1/8" off of the edge of the spindle (it is really thick here) and it worked fine.
SHawn

ok. no problem. lmk if yo change your mind.

**71swb4x4** · 01-08-2009, 10:42 PM

Quote:

Originally Posted by 70cst

All I know is I have a 2/4 drop and and the LCA do rub my wheels. Some say the LCA are issues while others don't have have this issue. I cannot use factory 15x8 GM Ralleys. It's posssible that MarkMark won't have an issue but it's good to be aware of this possible issue. It would be a bummer to switch and then not be able to use the Rally rims.I believe it has to do with back spacing.

You have 15" truck ralley wheels. Craig has 17" corvette style ralley wheels.

49m · 01-08-2009, 10:58 PM

I have rallys to trade. Can box and ship.

**70cst** · 01-08-2009, 11:49 PM

Quote:

Originally Posted by 71swb4x4

You have 15" truck ralley wheels. Craig has 17" corvette style ralley wheels.

Ok thanks...I missed that. Should be no issues then.

MarkMark · 01-09-2009, 06:50 AM

Quote:

Originally Posted by toomanytoyz

Would like to get in Line also, How does it stand as of Now?
Rick

im waiting to hear from LUV2XCLR8 as of now. what do yo uhave for trade?

Quote:

Originally Posted by 49m

I have rallys to trade. Can box and ship.

can you get pics? tires included?

49m · 01-09-2009, 07:42 AM

They include tires. They have been sandblaster then dip in paint and cooked. Then I painted them rally silver. The tires are like new.

royo · 01-09-2009, 01:28 PM

Quote:

Originally Posted by LUV2XCLR8

I have a set of 17" Wheel Vintiques Corvette Rally's with
SS trim rings and police caps. My tires might be 2 low of
a profile for you, or maybe we could just swap out rims?

Pictures of Rally's on my Jimmy

how much for the rims

LUV2XCLR8 · 01-09-2009, 04:41 PM

Quote:

Originally Posted by MarkMark

sent you a PM!!

Tag your it

MarkMark · 01-09-2009, 05:40 PM

Quote:

Originally Posted by 49m

They include tires. They have been sandblaster then dip in paint and cooked. Then I painted them rally silver. The tires are like new.

Unfortunately the All-terrain style tires won't work for me. Might look funny on my truck with 3.5/6 drop.

any one else up for a trade???

49m · 01-09-2009, 11:40 PM

would you consider trading the wheels and some cash or some thin

toomanytoyz · 01-10-2009, 11:56 PM

Any Deal made Yet?

Thanks, Rick

01-07-2009, 02:51 PM	#1
MarkMark Registered User Join Date: Oct 2008 Location: Richmond Hill, GA Posts: 82	WTT 17 Type TQ wheels/ties for truck rally's+cash Im in the mood for a more original look for my truck right now. So I'm looking to trade my Chrome 17 inch Type TQ wheels and general Grabber 255/60 for a set of truck rally's plus a little cash. Tires have plenty of meat left. only had about 3k put on them. A 15x10/8 setup would be nice but 15x8 all around would be fine. Need to have good tires, beauty rings and caps. Take a look. I have the center cap to this one in the cab. took wheels off last week for a good cleanin and forgot to put it back on.

01-07-2009, 02:54 PM	#2
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: WTT 17 Type TQ wheels/ties for truck rally's+cash im interested. __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

01-07-2009, 03:35 PM	#4
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,377	Re: WTT 17 Type TQ wheels/ties for truck rally's+cash Keep in mind that if your truck is lowered the 15x8 might rub on the front lower control arms. I have a 2/4 drop and my 15x8 GM Ralleys rub in the front. I swiched to TT II's 16x8'. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

01-07-2009, 03:44 PM	#5
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,474	Re: WTT 17 Type TQ wheels/ties for truck rally's+cash I have a set of 17" Wheel Vintiques Corvette Rally's with SS trim rings and police caps. My tires might be 2 low of a profile for you, or maybe we could just swap out rims? Pictures of Rally's on my Jimmy __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T Last edited by LUV2XCLR8; 01-07-2009 at 03:44 PM.

01-07-2009, 05:27 PM	#7
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,474	Re: WTT 17 Type TQ wheels/ties for truck rally's+cash Mine don't rub anywhere, that truck is bagged and is around a 5/7 drop aired out. Their website says they are 8" wide __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

01-07-2009, 06:03 PM	#8
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: WTT 17 Type TQ wheels/ties for truck rally's+cash I have a extremely nice set of ralleys with great caps and rings with almost new BF Goodrich tires (not all terrain)255/70 15. They are 15 x 8 with standard 4" backspacing. What size are your wheels and backspacing. Who makes them? Any other info would be good. This is what they looked like when I purchased them from a board member. THey haven't been driven on at all since I got them. They have just been on my torn apart project, getting rolled around the shop. Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE Last edited by jorgensensc; 01-07-2009 at 06:17 PM.

01-07-2009, 06:50 PM	#10
white72c10 Registered User Join Date: Aug 2008 Location: Salina Kansas Posts: 87	Re: WTT 17 Type TQ wheels/ties for truck rally's+cash Willing to sell the rims outright? If so how much shipped

01-08-2009, 02:47 PM	#14
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: WTT 17 Type TQ wheels/ties for truck rally's+cash I think I will hang on to the ralleys for now. I was hoping to stay with the 8" width. For what it is worth the ralleys did hit the edge of the spindle. I used a grinder and knocked about 1/8" off of the edge of the spindle (it is really thick here) and it worked fine. SHawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

01-08-2009, 10:58 PM	#17
49m Registered User Join Date: Aug 2007 Location: Turners Station,Ky Posts: 842	Re: WTT 17 Type TQ wheels/ties for truck rally's+cash I have rallys to trade. Can box and ship. __________________ My Rides 1969 Mustang gt coupe 1971 Chevy Cheyenne 1986 Iroc camaro 1986 K10 Short Bed 1987 Iroc Camaro 1990 rs Camaro 1992 350 ss truck 1998 Honda Civic 2005 Ram 2500 Cummins My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=279831

01-09-2009, 07:42 AM	#20
49m Registered User Join Date: Aug 2007 Location: Turners Station,Ky Posts: 842	Re: WTT 17 Type TQ wheels/ties for truck rally's+cash They include tires. They have been sandblaster then dip in paint and cooked. Then I painted them rally silver. The tires are like new. Attached Images __________________ My Rides 1969 Mustang gt coupe 1971 Chevy Cheyenne 1986 Iroc camaro 1986 K10 Short Bed 1987 Iroc Camaro 1990 rs Camaro 1992 350 ss truck 1998 Honda Civic 2005 Ram 2500 Cummins My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=279831

01-09-2009, 11:40 PM	#24
49m Registered User Join Date: Aug 2007 Location: Turners Station,Ky Posts: 842	Re: WTT 17 Type TQ wheels/ties for truck rally's+cash would you consider trading the wheels and some cash or some thin __________________ My Rides 1969 Mustang gt coupe 1971 Chevy Cheyenne 1986 Iroc camaro 1986 K10 Short Bed 1987 Iroc Camaro 1990 rs Camaro 1992 350 ss truck 1998 Honda Civic 2005 Ram 2500 Cummins My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=279831

01-10-2009, 11:56 PM	#25
toomanytoyz Luv the Crewcabs Join Date: Aug 2006 Location: Andrews, In. 46702 Posts: 4,097	Re: WTT 17 Type TQ wheels/ties for truck rally's+cash Any Deal made Yet? Thanks, Rick __________________ 55 Nomad 52 Willys Truck 67 Stepper 67 Fleet 68 Wrecker 68 Suburban 76 Crewcab 79 Gmc Dumptruck 84 Blazer 86 Crewcab Stepside 87 Iroc 89 GMC Plow Truck 91 Camaro Vert 96 Z71 Stepsde

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.