![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Nov 2007
Location: Los Angeles, CA
Posts: 84
|
Removing Headliner Trim
How do I remove the headliner trim tabs from their slots WITHOUT breaking anything?
I ran a thorough search here and finally found a picture of the tabs but its not clear enough for me to determine how they are held in the slot. Do I just pry them out with a screwdriver? Or… ???? thanx
__________________
1970 CST long bed Fleetside |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Dec 2006
Location: Montana
Posts: 223
|
Re: Removing Headliner Trim
It seems like breaking them is part of removing them.
![]() Seriously, they are so brittle at this age that it is about impossible to get them out without at least cracking a moulding. All you can do is try to carefully pry out near the clip spots with something like a plastic blade. Last edited by MT1972cheyenne; 01-11-2009 at 08:28 PM. |
![]() |
![]() |
![]() |
#3 |
The Older Generation
![]() ![]() ![]() Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,524
|
Re: Removing Headliner Trim
-
Make sure the trim is warm before you try it. I have had good luck with a heat gun set on low. Just don't get it hot enough to melt it. I would think a hair dryer would work also. LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|