'67 Chevy steering column - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mundi · 01-31-2009, 09:39 AM

Hello all
I'm hoping someone at this site is familiar with steering columns for 1967 C10 Chevrolets. I have taken mine apart because it was giving a lot of problems going in and out of gears. I usually take pictures of projects like this, but I neglected to this time and am having trouble remembering how all the pieces went together. Does anybody have any kind of diagram for this? I can't seem to find a relevant one online for this model. Any help would be appreciated.
Thanks
Mundi

olblue60@aol.com · 01-31-2009, 11:18 AM

I dont have the info. that your needing, but there is a wealth of knowledge on this board. Welcome to it from Maryland! I just noticed your location. My brother-in- law lives in Palm Bay. He's a hot rod guy.

mundi · 01-31-2009, 04:14 PM

Thanks, I sure hope so, I'm trying to get this baby up and running again for Mon. morning work.
I bet it's a lot colder in Maryland than it is here in the Sunshine State!

msgross · 01-31-2009, 04:20 PM

If you look in our FAQ you will find pictures of a tilt column exploded view...

welcome

mundi · 01-31-2009, 07:32 PM

I appreciate the time you took to post this picture. Mine is not a tilt column, so a lot of the pieces are different. Thanks again though.
~ Mundi

01-31-2009, 09:39 AM	#1
mundi Registered User Join Date: Jan 2009 Location: Palm Bay, Florida Posts: 3	'67 Chevy steering column Hello all I'm hoping someone at this site is familiar with steering columns for 1967 C10 Chevrolets. I have taken mine apart because it was giving a lot of problems going in and out of gears. I usually take pictures of projects like this, but I neglected to this time and am having trouble remembering how all the pieces went together. Does anybody have any kind of diagram for this? I can't seem to find a relevant one online for this model. Any help would be appreciated. Thanks Mundi

01-31-2009, 11:18 AM	#2
olblue60@aol.com member Join Date: Dec 2003 Location: Silver Spring Md.20901 Posts: 2,031	Re: '67 Chevy steering column I dont have the info. that your needing, but there is a wealth of knowledge on this board. Welcome to it from Maryland! I just noticed your location. My brother-in- law lives in Palm Bay. He's a hot rod guy. __________________ 1967 C/K10 Chevy Panel 1968 C/K20 Chevy Pickup 1968 C/K10 Chevy Suburban 1941 Chevy Sedan Delivery 1960 Chevy Sedan Delivery 1972 Camaro SS 396 #s matching 1971 Harley FX Superglide Last edited by olblue60@aol.com; 01-31-2009 at 11:20 AM.

01-31-2009, 04:14 PM	#3
mundi Registered User Join Date: Jan 2009 Location: Palm Bay, Florida Posts: 3	Re: '67 Chevy steering column Thanks, I sure hope so, I'm trying to get this baby up and running again for Mon. morning work. I bet it's a lot colder in Maryland than it is here in the Sunshine State!

01-31-2009, 04:20 PM	#4
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: '67 Chevy steering column If you look in our FAQ you will find pictures of a tilt column exploded view... welcome Attached Images __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

01-31-2009, 07:32 PM	#5
mundi Registered User Join Date: Jan 2009 Location: Palm Bay, Florida Posts: 3	Re: '67 Chevy steering column I appreciate the time you took to post this picture. Mine is not a tilt column, so a lot of the pieces are different. Thanks again though. ~ Mundi

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.