![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Slugish
![]() Join Date: Jan 2005
Location: Earlysville, Va.
Posts: 1,024
|
Have no stall now -weird
i KNOW THIS IS ANOITHER DUMB POST BUT , HERE IT IS
* AFTER I INSTALLED A DIFFERENT CARB ON MY 400 SB, MY STALL DOSENT WORK . I USED TO BE ABLE TO POWER BRAKE TO ABOUT 2200 OR SO , NOW I HAVE NOTHING . IT ACTUALLY GOES FORWARD AT IDLE OF 900 RPMS , IF I DONT HOLD THE BRAKE . IS ANY OF THE LINKAGE TO THE CARB I MIGHT HAVE HOOKED UP WRONG . I WAS ACTUALLY ASHAMED TO POST THIS , BUT I FINALLY DID - OH WELL ![]() |
![]() |
![]() |
![]() |
#2 |
The One And Only !!!
Join Date: Jan 2007
Location: Hole in the woods Florida
Posts: 4,567
|
Re: Have no stall now -weird
Don't know what trans your running but;
Gander at your trans kick-down cable closer, Compare the cable hook-up location on the old carb to the replacement carb.... It could be in a slightly different location thus throwing the cable out of adjustment.
__________________
93 Jeep XJ 88 Buick La Sabra Toys; 88 TA-GTA in the works.... 97 GMC Ext. Cab 502 Crate 5 Spd......Sucks Gas But Haulz Azz ! ![]() The primary function of an Engineer is to make it difficult for the Fabricator and impossible for the Mechanic. "Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
Last edited by Restrorob; 02-11-2009 at 10:53 PM. |
![]() |
![]() |
![]() |
#3 |
Slugish
![]() Join Date: Jan 2005
Location: Earlysville, Va.
Posts: 1,024
|
Re: Have no stall now -weird
Thanks for the reply restrobob.
think youre right > must have something to do with the kickdown cable. |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|