fleetside patch panels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

djracer · 02-15-2009, 07:06 PM

I have a long fleet bed thats pretty nice on the outside but rotten down low on the inside. I will cut out sections and ship them for patch panels. Let me know what you need and we will work a deal.

heavy71chevy · 02-15-2009, 07:09 PM

I need The rear section of the left side..got a pic?

djracer · 02-15-2009, 07:38 PM

pics

djracer · 02-15-2009, 07:39 PM

more

djracer · 02-15-2009, 07:41 PM

this thing also has an uncut air dash and some nice trailing arms.

msgross · 02-15-2009, 07:51 PM

how's the inner wheel wells?

djracer · 02-15-2009, 07:54 PM

I'll try to find time to pull the inner wheel wells and checkout that area!

My72BB · 02-15-2009, 08:02 PM

I need something to patch fuel doors for aftermarket saddle tanks...Halfway between cab and rear wheel and halfway up on both sides...say 12" X 12"???

Is this what you had in mind and how much?

Alan

djracer · 02-15-2009, 11:14 PM

how does 100.00 shipped sound for both sides.

My72BB · 02-16-2009, 08:24 AM

Thanks...I'll pass right now.

djracer · 02-16-2009, 07:07 PM

If that sounds high make a reasonable offer.

djracer · 02-16-2009, 07:10 PM

Quote:

Originally Posted by msgross

how's the inner wheel wells?

All of that area that can be seen with the tubs still in looks solid. it may have just a little at the rear where the tubs mount.

msgross · 02-16-2009, 07:11 PM

If it happens to be clean when you tear it apart let me know...

FITS2AT · 02-16-2009, 07:14 PM

How much for the two wheels archs?

djracer · 02-16-2009, 09:15 PM

Quote:

Originally Posted by FITS2AT

How much for the two wheels archs?

I'll put you in line after I see if msgross wants them.

FITS2AT · 02-16-2009, 09:20 PM

Sorry outer wheel archs.

djracer · 02-16-2009, 09:40 PM

I might be able to seperate the two pieces.

FITS2AT · 02-16-2009, 09:48 PM

Just let me know.I will take them if you do.

VDOG · 02-16-2009, 11:57 PM

I need half of the roof from the windshield to just above the gladd on the back window, passenger side to the middle of the pillars.

capriceutah · 02-17-2009, 02:11 AM

I need from the reflector light to the tail light on the passenger side.

02-15-2009, 07:06 PM	#1
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,894	fleetside patch panels I have a long fleet bed thats pretty nice on the outside but rotten down low on the inside. I will cut out sections and ship them for patch panels. Let me know what you need and we will work a deal. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-15-2009, 07:09 PM	#2
heavy71chevy Registered User Join Date: Apr 2007 Location: antreville, south carolina Posts: 873	Re: fleetside patch panels I need The rear section of the left side..got a pic? __________________ "Dixie Destroyer" 71 C10 LWB Fleet Future Blown Prostreet Monster

02-15-2009, 07:38 PM	#3
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,894	Re: fleetside patch panels pics Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-15-2009, 07:39 PM	#4
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,894	Re: fleetside patch panels more Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-15-2009, 07:41 PM	#5
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,894	Re: fleetside patch panels this thing also has an uncut air dash and some nice trailing arms. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-15-2009, 07:51 PM	#6
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: fleetside patch panels how's the inner wheel wells? Attached Images __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

02-15-2009, 07:54 PM	#7
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,894	Re: fleetside patch panels I'll try to find time to pull the inner wheel wells and checkout that area! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-15-2009, 08:02 PM	#8
My72BB Registered User Join Date: Oct 2007 Location: Fairfield, PA Posts: 503	Re: fleetside patch panels I need something to patch fuel doors for aftermarket saddle tanks...Halfway between cab and rear wheel and halfway up on both sides...say 12" X 12"??? Is this what you had in mind and how much? Alan

02-15-2009, 11:14 PM	#9
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,894	Re: fleetside patch panels how does 100.00 shipped sound for both sides. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-16-2009, 08:24 AM	#10
My72BB Registered User Join Date: Oct 2007 Location: Fairfield, PA Posts: 503	Re: fleetside patch panels Thanks...I'll pass right now.

02-16-2009, 07:07 PM	#11
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,894	Re: fleetside patch panels If that sounds high make a reasonable offer. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-16-2009, 07:11 PM	#13
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: fleetside patch panels If it happens to be clean when you tear it apart let me know... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

02-16-2009, 07:14 PM	#14
FITS2AT Registered User Join Date: Oct 2006 Location: Dickson Tennessee Posts: 91	Re: fleetside patch panels How much for the two wheels archs? __________________

02-16-2009, 09:20 PM	#16
FITS2AT Registered User Join Date: Oct 2006 Location: Dickson Tennessee Posts: 91	Re: fleetside patch panels Sorry outer wheel archs. __________________

02-16-2009, 09:40 PM	#17
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,894	Re: fleetside patch panels I might be able to seperate the two pieces. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!



Register or Log In To remove these advertisements.

02-16-2009, 09:48 PM	#18
FITS2AT Registered User Join Date: Oct 2006 Location: Dickson Tennessee Posts: 91	Re: fleetside patch panels Just let me know.I will take them if you do. __________________

02-16-2009, 11:57 PM	#19
VDOG Grand PooBaa Member Join Date: Jan 2001 Location: LA, CA Posts: 5,302	Re: fleetside patch panels I need half of the roof from the windshield to just above the gladd on the back window, passenger side to the middle of the pillars.

02-17-2009, 02:11 AM	#20
capriceutah Registered User Join Date: Oct 2007 Location: Midvale, UT Posts: 40	Re: fleetside patch panels I need from the reflector light to the tail light on the passenger side.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.