Door vin plates

[bw4sale]

I noticed the other day the the vin tags on my truck and my donor truck are different. One is a single plate. The other is two plates. They are both 68's as far as I know. I haven't actually run the vin #'s to make sure. What's up with that? Anyone know?

[Longhorn Man]

decode the second one... i'll bet it's a 70 or newer.

[jbristo67]

I dont even have those should I be worried.

[68_Bowtie]

My 68 cab had 2. I've changed cabs to a 72. Now I gotta figure out exactly where to put my 68 plate, because of the relief vent.

[Longhorn Man]

Originally Posted by jbristo67

I dont even have those should I be worried.

ONly if an officer of the law ever wants to look... or if you go to sell it... or if you take it to a proper inspection station.
Without the VIN, you can't prove it's ID, without being able to prove the truck's ID, it is then considered stollen, and then taken from you.

[chevy29267truck]

ok some trucks had one plate and some had two plates on them the only way is too cut around the plate or plates

[toomanytoyz]

Originally Posted by chevy29267truck

ok some trucks had one plate and some had two plates on them the only way is too cut around the plate or plates

Just drill out the rivets, Can replace with new rivets...........

Rick

[Longhorn Man]

some trucks had 2... 67 - 69 trucks
some had one... 70 - 72

[sick69]

Those "new rivets" are rosette rivits at 50.00 for a set of 4! When you can find them.



Frank

[chevy29267truck]

drill out the rivets if you want too go too jail for a long time

[toomanytoyz]

Originally Posted by chevy29267truck

drill out the rivets if you want too go too jail for a long time

How is that any Different than Cutting around Them?

[DMARCUM123]

well if you are smart and don't tell the whole world what you did who would know

[Longhorn Man]

any and all tampering is the same crime.
So cut around them and wled... or drill rivits, and spend $$ for new ones.... either way, there's legal implications.

[sick69]

Originally Posted by DMARCUM123

well if you are smart and don't tell the whole world what you did who would know

If it EVER has to go through a vin inspection, for any reason, it would be found out. There are legal ways to change vin plates. Check with local dmv and or law enforcment for requirements.



Frank

[Fastfun]

I saved my rosette rivets

[bw4sale]

You guys make it sound like you can NEVER change a vin plate. I think through the proper channels you can legally. It probably has to be titled as a rebuild or something though. I'm in Tennessee and I think our laws are much more lax anyway. We don't even have vehicle inspections. I'm actually using neither of these cabs. I've got a nice one sitting in my dad's shop just waiting for me to get moving on this project. Both of these cabs are shot.

[chevy29267truck]

ok hope ever thing works out for you

[jbristo67]

Originally Posted by Longhorn Man

ONly if an officer of the law ever wants to look... or if you go to sell it... or if you take it to a proper inspection station.
Without the VIN, you can't prove it's ID, without being able to prove the truck's ID, it is then considered stollen, and then taken from you.

Ahhh the vins in the glove box its cool. I have a title and tags and i never have to get it inspected.

[67_C-30]

Originally Posted by jbristo67

Ahhh the vins in the glove box its cool. I have a title and tags and i never have to get it inspected.

A VIN in the glovebox is 100% absolutely useless in the eyes of the law. The glovebox door is a removeable part and not considered a proper ID. Even if you don't have inspections, if you get into a wreck, Police officers (at least around here) write the VIN number off the VIN tag and not the paperwork. I would not even began building a truck unless I had it had a VIN tag. There have been true horror stories about people restoring vehicles only to find out they were stolen and have them seized and returned to the owner it was stolen from - no matter how much money you put into it. You could check to see if you're truck is correct by checking the VIN # on frame, but I'd still want the tag and would wonder why its gone. Just my nickel's worth of free advice...

[68_Bowtie]

Kind of a double edge sword. I have a title for the 72 cab that I put on my 68, but since the only change is the cab, I'm gonna put my 68 plate on it and call it good.

[jbristo67]

Originally Posted by 67_C-30

A VIN in the glovebox is 100% absolutely useless in the eyes of the law. The glovebox door is a removeable part and not considered a proper ID. Even if you don't have inspections, if you get into a wreck, Police officers (at least around here) write the VIN number off the VIN tag and not the paperwork. I would not even began building a truck unless I had it had a VIN tag. There have been true horror stories about people restoring vehicles only to find out they were stolen and have them seized and returned to the owner it was stolen from - no matter how much money you put into it. You could check to see if you're truck is correct by checking the VIN # on frame, but I'd still want the tag and would wonder why its gone. Just my nickel's worth of free advice...

I have checked the frame to the title. It is good. I guess who ever the last body man was a short bus rider from the best I can tell. I would rather have the tag to but I have all of the paper work so I am good with what I have as long as what you say is true about the frame.

[vectorit]

Been there done the VIN shuffle on Camaro's, and have been hassled in a big way with the car being impounded. Sheriff's could care less about your story about restoration, and will only look at you as a sneaky crimminal that is wasting their time.
Since then, if there is ANY doubt about the authenticity of the VIN I walk away. It's just not worth the hassles.

You may like this song:

YouTube - Johnny Cash & June Carter Cash -...

But the guy with the badge n gun makin your day doesn't.

[bw4sale]

Wow. I didn't expect this thread to turn into this. I was just curious about the two different styles.

[jbristo67]

No kidding they are scaring the sh!t out mf me lol

[Longhorn Man]

with no oficial von on your truck.... I would be scared.
Upon discovering it, you WILL lose your truck. You MIGHT get it back. A sticker on a glove box, and a partial stamping on the frame are not good enough. Just removing it is a huge fine in most, if not all, states.