bagged truck help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

merca · 03-09-2009, 07:50 PM

hey guys, i need help. i bagged my 86 c10, used strong arm upper and lower control arms. everything fits real nice, but im worried about the brake hoses.what are you guys using for the hoses from the frame to the caliper?

badblu97 · 03-09-2009, 08:01 PM

I was using the stock ones, just unbolted from the control arm...stretched pretty tight when its laid out....i know i know...im subscribed to see what responses you get.....good luck...

oh...and pics would be cool!!!

merca · 03-11-2009, 02:03 PM

okay that is what i did. i had to run them through the upper arm, and gently bend them where they mount to the caliper to clear the crossmember when aired up.hope it works.

hotrodhomi · 03-11-2009, 03:23 PM

I took mine to a local hose and fitting place that makes brake lines and had some made that were longer.

smoknbarrels · 03-11-2009, 05:59 PM

Quote:

Originally Posted by hotrodhomi

I took mine to a local hose and fitting place that makes brake lines and had some made that were longer.

sounds expensive.. just go to NAPA and bring them your old hose or look up the fittings size/threads and they will look in the book to find a longer hose that is cheap, in stock, and fits perfect.. there are tons out there.. I know a lot of the old cars had long brake lines, eg: early nova's and pontiacs. NAPA's book even has photos in it and all dimensions.
Thats what I did.

badblu97 · 03-11-2009, 08:00 PM

just an idea....could you use lines from a 4x4? shouldnt they be longer?

03-09-2009, 07:50 PM	#1
merca Registered User Join Date: Oct 2008 Location: quakertown pa. Posts: 59	bagged truck help hey guys, i need help. i bagged my 86 c10, used strong arm upper and lower control arms. everything fits real nice, but im worried about the brake hoses.what are you guys using for the hoses from the frame to the caliper?

03-09-2009, 08:01 PM	#2
badblu97 Double 6's Join Date: Oct 2008 Location: Winter Haven, FL Posts: 349	Re: bagged truck help I was using the stock ones, just unbolted from the control arm...stretched pretty tight when its laid out....i know i know...im subscribed to see what responses you get.....good luck... oh...and pics would be cool!!! __________________ Street Glidin! 1966 LWB Custom Cab (sold) 1982 Short Fleet (under the knife) 1998 S10 2wd Fleet 2007 Chevy Silverado Crew 2007 Harley Davidson Street Glide Last edited by badblu97; 03-09-2009 at 08:06 PM.

03-11-2009, 02:03 PM	#3
merca Registered User Join Date: Oct 2008 Location: quakertown pa. Posts: 59	Re: bagged truck help okay that is what i did. i had to run them through the upper arm, and gently bend them where they mount to the caliper to clear the crossmember when aired up.hope it works.

03-11-2009, 03:23 PM	#4
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	Re: bagged truck help I took mine to a local hose and fitting place that makes brake lines and had some made that were longer. __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht

03-11-2009, 08:00 PM	#6
badblu97 Double 6's Join Date: Oct 2008 Location: Winter Haven, FL Posts: 349	Re: bagged truck help just an idea....could you use lines from a 4x4? shouldnt they be longer? __________________ Street Glidin! 1966 LWB Custom Cab (sold) 1982 Short Fleet (under the knife) 1998 S10 2wd Fleet 2007 Chevy Silverado Crew 2007 Harley Davidson Street Glide

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.