headlight connection terminals for relay upgrade - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mole2000 · 03-19-2009, 04:08 PM

Anyone know a source for the proper terminals for upgrading headlight connections? I'm doing the relay upgrade and this is my last piece. I have the plug from Dorman, but the actual terminals are proving problematic to reuse. All the female spade connectors I find are too small for the headlamp...

Thanks

piecesparts · 03-19-2009, 04:53 PM

Try this outlet. They are quick and the product is quality

http://www.innovativewiring.com/Part...tPartsPage.htm

cdowns · 03-19-2009, 05:04 PM

Napa

Brad · 03-19-2009, 06:10 PM

Try here also: http://www.ronfrancis.com/

6T8&O-her-1 · 03-19-2009, 10:50 PM

I got one yesterday from Autozone, $5.99 I think....Works Fine. The only thing its not Double wired for use in the left headlight....But I used my left headlight socket as a Source for my Hi beam and low beam relays, and used the New plug on the left headlight so it wasn't an issue and shouldn't be for you. The Green Wire(s) are Hi and Tan wire(s) are Low beam. Black is ground. I just did mine today and tested them out tonight..Much Better!! lights are much Brighter and I get 12 volts with engine off at the headlights.

03-19-2009, 04:08 PM	#1
mole2000 Registered User Join Date: Aug 2008 Location: Austin, Texas Posts: 78	headlight connection terminals for relay upgrade Anyone know a source for the proper terminals for upgrading headlight connections? I'm doing the relay upgrade and this is my last piece. I have the plug from Dorman, but the actual terminals are proving problematic to reuse. All the female spade connectors I find are too small for the headlamp... Thanks

03-19-2009, 04:53 PM	#2
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Re: headlight connection terminals for relay upgrade Try this outlet. They are quick and the product is quality http://www.innovativewiring.com/Part...tPartsPage.htm

03-19-2009, 05:04 PM	#3
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: headlight connection terminals for relay upgrade Napa __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

03-19-2009, 06:10 PM	#4
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,673	Re: headlight connection terminals for relay upgrade Try here also: http://www.ronfrancis.com/ __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...

03-19-2009, 10:50 PM	#5
6T8&O-her-1 Registered User Join Date: Jan 2009 Location: Greensboro NC Posts: 31	Re: headlight connection terminals for relay upgrade I got one yesterday from Autozone, $5.99 I think....Works Fine. The only thing its not Double wired for use in the left headlight....But I used my left headlight socket as a Source for my Hi beam and low beam relays, and used the New plug on the left headlight so it wasn't an issue and shouldn't be for you. The Green Wire(s) are Hi and Tan wire(s) are Low beam. Black is ground. I just did mine today and tested them out tonight..Much Better!! lights are much Brighter and I get 12 volts with engine off at the headlights. Last edited by 6T8&O-her-1; 03-19-2009 at 10:51 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.