My long term 57 project - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ChuckDriver · 03-20-2009, 08:58 AM

I recently found this forum and have enjoyed reading about your projects. So I thought I would share mine. I bought my 57 Big Window Short Bed in Jan 1993 in Oklahoma City. I was completing pilot training for the Air Force and ran across an ad for it in the auto trader. I drove it back to SC pulling a Jeep CJ-7 with its long block in the bed!

Well, I got stationed in Panama South America for 3 years before getting to Charleston, SC. It sat another 3 years before I got the time to get started on it!

The first thing I did was remove the front sheet metal to get to the 428? Caddy motor and trans. My uncle gave me a Camaro clip and I hauled it down to Lawrenceville, Ga to have Mike Chesser weld it in. From the trucks I've seen clipped he does the best job of making it look like a factory install.

ChuckDriver · 03-20-2009, 09:07 AM

After getting it home I pulled the motor and trans from my Grandfathers 71 Impala. It was a good runing 350/300HP and 350 trans combo and my Mom gave it to me. My Dad and I made a trans crossmember after one I had seen in a Classis Trucks article. I think we went a little over board, but it sure is strong!

JJ

ChuckDriver · 03-22-2009, 12:39 PM

I completly rebuilt the front suspension with all new components, poly bushings and powdercoated the A-Frames and springs and spindles.

ChuckDriver · 03-22-2009, 12:43 PM

The engine was in and out a few times before I did a "Krylon" rebuild. I just planned to use it for fitment and to build around it, but I got carried away and fully dressed it out!

GRIMSS · 03-22-2009, 01:06 PM

Looks good. You also worked over the cab, any more pics of it.

1956cameo · 03-22-2009, 02:14 PM

That is a sweet looking truck you are building. That guy really DOES know how to put a camaro clip in and make it look almost factory. That is the best camaro clip job I have ever seen!
You and I must have bought our trucks from the same person. My 56 cameo also has a 429 caddy motor that was installed by one of the previous owners.

**JML55** · 03-22-2009, 03:13 PM

Welcome, very nice work.

ChuckDriver · 03-22-2009, 06:34 PM

Thanks JML55, your work is very impressive!!

JJ

ChuckDriver · 03-22-2009, 06:39 PM

GRMSS

I have done a lot of work on the cab, I'll put up more pics soon! Thanks, JJ

ChuckDriver · 03-23-2009, 09:48 AM

I bought a mig to do the welding on the cab myself. I had never done any before but thought this would be a great way to learn! There were A LOT of holes to fill including a very large one from the PO who put the Caddy motor in it. They had just covered it using the famous license plate trick! So I cut a section form one that had been rolled. I cut a larger section from mine to make it easier to line up, using as many flat areas and straight cuts as I could. There's probably a 1000 tacks to hold it in place!!

JJ

stan3018 · 03-23-2009, 11:14 AM

welcome >>>>nice work keep it up...

ezekiel · 03-24-2009, 12:35 AM

I would love to see a technical write up on that camaro clip installation.

That really is the Best Job I've ever seen on a clip installation.

Is there any chance that we could see some more in depth photos of that front clip?

Maybe even a tutorial on how to install it like that?

Kim57 · 03-24-2009, 10:46 AM

Nice work JJ. Keep the pics coming, we love pics.
Kim

ChuckDriver · 03-25-2009, 08:08 PM

Ezekiel, I didn't do the clip. It was done for me by Mike Chesser in GA. He did a great job making it look like it grew there. I can supply a few more pic's, but I can't take credit for it. I'm sure if you contact Mike he would love to do a story on it. He has a web site showing a lot of his work.

JJ

Thanks Kim, I'll get more out there!

ChuckDriver · 03-25-2009, 08:18 PM

Here are a few pic's of the rear suspension. I want to run a wider tire and rim than stock and keep them tucked under the fenders. I saw an article in Classic Trucks a few years ago for a mono-leaf kit that I think fits the bill perfectly. It's been so long ago when I bought it that I don't remember who I bought it from. I do have nearly 10 years worth of magazines that I would have to look through to find the article. Maybe someone here will recognize it!
It was very easy to install and came with everything needed to put it in.

The rear is from a 69 chevy car and it's a 12 bolt. I've since had it shortened by Moser who also added a 373 gear with a Tru-Trac Posi. It also now has Ford big bearing axle ends and faxles.

I also put a big brake kit on it from Master Power brakes. And ran SS brake lines.

Here are the pic's!!

JJ

87Lowrider · 03-25-2009, 08:47 PM

Nice work...

Ken

ezekiel · 03-25-2009, 09:45 PM

Quote:

Originally Posted by ChuckDriver

Ezekiel, I didn't do the clip. It was done for me by Mike Chesser in GA. He did a great job making it look like it grew there. I can supply a few more pic's, but I can't take credit for it. I'm sure if you contact Mike he would love to do a story on it. He has a web site showing a lot of his work.

JJ

Is this Mike's webpage?

If so, I sent him an invitation to speak to his adoring fans

ChuckDriver · 03-26-2009, 03:46 AM

That's the one. Sorry for not posting the link myself!

JJ

OARNGESI · 03-26-2009, 05:12 AM

That looks good but why did you do the front and rear of the frame different colors

ChuckDriver · 03-26-2009, 03:32 PM

OARNGESI, You've got a sharp eye! It is two different colors. I primed the entire frame using Rustolem that I brushed on, then I painted the rear half and re-installed the rear suspension. It was a few months before I got to the front and I didn't like to color on the rear, to light, so I went a shade darker on the front. I used duplicolor and Plastic Kote spray paint, because I plan to blow it all apart sandblast the frame and paint it one color with a quality epoxy paint or maybe powder coat!

JJ

ChuckDriver · 03-29-2009, 04:05 PM

Trying to upload more pic's, but they want re-size? Haven't had this problem before, is this an issue with the site?

OrrieG · 03-30-2009, 12:38 AM

I thought it automatically resized them when you use the "manage attachments" link. If not most editing programs have a resize feature with an "internet" option that sizes them for web pages.

CAL 58 GMC · 03-31-2009, 01:21 AM

Nice job!!

nuke1 · 04-01-2009, 02:37 AM

Great job on the truck so far, too bad it had to sit for 3 years, imagine what would have been done, it looks like you have the same brackets and pulleys on your engine as i do, from Bills hot rod company, nice stuff.

ChuckDriver · 04-01-2009, 09:23 AM

Thanks nuke1!

Yes the three years it sat did slow down the process but i'ts been worth it. I really enjoy working on it when I get the time between work and family.

The pulley's actually came from Summit and the brackets are from Alan Grove. The brackets fit perfect!! I need to get going of the AC and I'll be ordering the brackets from him as well.

I've been trying to add more pic's but they want resize for me and I have no idea how to do it myself.

03-20-2009, 08:58 AM	#1
ChuckDriver A320 Pilot/USAF Retired Join Date: Mar 2009 Location: Charleston, SC Posts: 2,629	My long term 57 project I recently found this forum and have enjoyed reading about your projects. So I thought I would share mine. I bought my 57 Big Window Short Bed in Jan 1993 in Oklahoma City. I was completing pilot training for the Air Force and ran across an ad for it in the auto trader. I drove it back to SC pulling a Jeep CJ-7 with its long block in the bed! Well, I got stationed in Panama South America for 3 years before getting to Charleston, SC. It sat another 3 years before I got the time to get started on it! The first thing I did was remove the front sheet metal to get to the 428? Caddy motor and trans. My uncle gave me a Camaro clip and I hauled it down to Lawrenceville, Ga to have Mike Chesser weld it in. From the trucks I've seen clipped he does the best job of making it look like a factory install. Attached Images

03-20-2009, 09:07 AM	#2
ChuckDriver A320 Pilot/USAF Retired Join Date: Mar 2009 Location: Charleston, SC Posts: 2,629	Re: My long term 57 project After getting it home I pulled the motor and trans from my Grandfathers 71 Impala. It was a good runing 350/300HP and 350 trans combo and my Mom gave it to me. My Dad and I made a trans crossmember after one I had seen in a Classis Trucks article. I think we went a little over board, but it sure is strong! JJ Attached Images

03-22-2009, 12:39 PM	#3
ChuckDriver A320 Pilot/USAF Retired Join Date: Mar 2009 Location: Charleston, SC Posts: 2,629	Re: My long term 57 project I completly rebuilt the front suspension with all new components, poly bushings and powdercoated the A-Frames and springs and spindles. Attached Images

03-22-2009, 12:43 PM	#4
ChuckDriver A320 Pilot/USAF Retired Join Date: Mar 2009 Location: Charleston, SC Posts: 2,629	Re: My long term 57 project The engine was in and out a few times before I did a "Krylon" rebuild. I just planned to use it for fitment and to build around it, but I got carried away and fully dressed it out! Attached Images

03-22-2009, 01:06 PM	#5
GRIMSS --------------- Join Date: Mar 2008 Location: Central Missouri Posts: 1,791	Re: My long term 57 project Looks good. You also worked over the cab, any more pics of it. __________________ 2001 GMC SIERRA 1956 Chevy Panel *Build Page* with a Scott's Hotrods IFS 1953 Chevy trucks *Project Dime Time* 1968 Camaro 1968 Volksrod "NOBACK" 55-59 one piece window *Video* 55-59 one piece window *template files* Jared

03-22-2009, 02:14 PM	#6
1956cameo Registered User Join Date: Apr 2008 Location: Angleton, TX Posts: 2,219	Re: My long term 57 project That is a sweet looking truck you are building. That guy really DOES know how to put a camaro clip in and make it look almost factory. That is the best camaro clip job I have ever seen! You and I must have bought our trucks from the same person. My 56 cameo also has a 429 caddy motor that was installed by one of the previous owners.

03-22-2009, 03:13 PM	#7
JML55 Senior Member Join Date: Nov 2008 Location: Fannystelle, Manitoba, Canada Posts: 853	Re: My long term 57 project Welcome, very nice work. __________________ Jean-Marc Lacasse 57 GMC 55 GMC 55 Belair 99 S10 http://67-72chevytrucks.com/vboard/s...d.php?t=316140 http://67-72chevytrucks.com/vboard/s...d.php?t=806011

03-22-2009, 06:34 PM	#8
ChuckDriver A320 Pilot/USAF Retired Join Date: Mar 2009 Location: Charleston, SC Posts: 2,629	Re: My long term 57 project Thanks JML55, your work is very impressive!! JJ

03-22-2009, 06:39 PM	#9
ChuckDriver A320 Pilot/USAF Retired Join Date: Mar 2009 Location: Charleston, SC Posts: 2,629	Re: My long term 57 project GRMSS I have done a lot of work on the cab, I'll put up more pics soon! Thanks, JJ

03-23-2009, 09:48 AM	#10
ChuckDriver A320 Pilot/USAF Retired Join Date: Mar 2009 Location: Charleston, SC Posts: 2,629	Re: My long term 57 project I bought a mig to do the welding on the cab myself. I had never done any before but thought this would be a great way to learn! There were A LOT of holes to fill including a very large one from the PO who put the Caddy motor in it. They had just covered it using the famous license plate trick! So I cut a section form one that had been rolled. I cut a larger section from mine to make it easier to line up, using as many flat areas and straight cuts as I could. There's probably a 1000 tacks to hold it in place!! JJ Attached Images

03-23-2009, 11:14 AM	#11
stan3018 Registered User Join Date: Feb 2009 Location: bronx ny Posts: 167	Re: My long term 57 project welcome >>>>nice work keep it up...

03-24-2009, 12:35 AM	#12
ezekiel Registered User Join Date: Dec 2006 Location: Calgary, Canada Posts: 54	Re: My long term 57 project I would love to see a technical write up on that camaro clip installation. That really is the Best Job I've ever seen on a clip installation. Is there any chance that we could see some more in depth photos of that front clip? Maybe even a tutorial on how to install it like that?

03-24-2009, 10:46 AM	#13
Kim57 Registered User Join Date: Aug 2007 Location: Corona, California Posts: 7,998	Re: My long term 57 project Nice work JJ. Keep the pics coming, we love pics. Kim

03-25-2009, 08:08 PM	#14
ChuckDriver A320 Pilot/USAF Retired Join Date: Mar 2009 Location: Charleston, SC Posts: 2,629	Re: My long term 57 project Ezekiel, I didn't do the clip. It was done for me by Mike Chesser in GA. He did a great job making it look like it grew there. I can supply a few more pic's, but I can't take credit for it. I'm sure if you contact Mike he would love to do a story on it. He has a web site showing a lot of his work. JJ Thanks Kim, I'll get more out there!

03-25-2009, 08:18 PM	#15
ChuckDriver A320 Pilot/USAF Retired Join Date: Mar 2009 Location: Charleston, SC Posts: 2,629	Re: My long term 57 project Here are a few pic's of the rear suspension. I want to run a wider tire and rim than stock and keep them tucked under the fenders. I saw an article in Classic Trucks a few years ago for a mono-leaf kit that I think fits the bill perfectly. It's been so long ago when I bought it that I don't remember who I bought it from. I do have nearly 10 years worth of magazines that I would have to look through to find the article. Maybe someone here will recognize it! It was very easy to install and came with everything needed to put it in. The rear is from a 69 chevy car and it's a 12 bolt. I've since had it shortened by Moser who also added a 373 gear with a Tru-Trac Posi. It also now has Ford big bearing axle ends and faxles. I also put a big brake kit on it from Master Power brakes. And ran SS brake lines. Here are the pic's!! JJ Attached Images



Register or Log In To remove these advertisements.

03-25-2009, 08:47 PM	#16
87Lowrider Navy Radioman Veteran Join Date: Jul 2007 Location: Western Kentucky Posts: 1,350	Re: My long term 57 project Nice work... Ken __________________ 1987 Chevrolet R10 Silverado BBC Build thread - SOLD 1986 GMC Sierra Classic - SOLD 1957 Chevy Step Side - At the Body Shop Daily Driver; 2005 Chevrolet Silverado 4x4 Z71 Stepside

03-26-2009, 03:46 AM	#18
ChuckDriver A320 Pilot/USAF Retired Join Date: Mar 2009 Location: Charleston, SC Posts: 2,629	Re: My long term 57 project That's the one. Sorry for not posting the link myself! JJ

03-26-2009, 05:12 AM	#19
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: My long term 57 project That looks good but why did you do the front and rear of the frame different colors __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

03-26-2009, 03:32 PM	#20
ChuckDriver A320 Pilot/USAF Retired Join Date: Mar 2009 Location: Charleston, SC Posts: 2,629	Re: My long term 57 project OARNGESI, You've got a sharp eye! It is two different colors. I primed the entire frame using Rustolem that I brushed on, then I painted the rear half and re-installed the rear suspension. It was a few months before I got to the front and I didn't like to color on the rear, to light, so I went a shade darker on the front. I used duplicolor and Plastic Kote spray paint, because I plan to blow it all apart sandblast the frame and paint it one color with a quality epoxy paint or maybe powder coat! JJ

03-29-2009, 04:05 PM	#21
ChuckDriver A320 Pilot/USAF Retired Join Date: Mar 2009 Location: Charleston, SC Posts: 2,629	Re: My long term 57 project Trying to upload more pic's, but they want re-size? Haven't had this problem before, is this an issue with the site? __________________ JJ My 1957 build: http://67-72chevytrucks.com/vboard/s...d.php?t=334552 http://www.trifive.com/forums/showthread.php?t=22037 Instagram - Chuckdriver57

03-30-2009, 12:38 AM	#22
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: My long term 57 project I thought it automatically resized them when you use the "manage attachments" link. If not most editing programs have a resize feature with an "internet" option that sizes them for web pages. __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project

03-31-2009, 01:21 AM	#23
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	Re: My long term 57 project Nice job!! __________________ Classic Trucks Link http://www.classictrucks.com/feature...uck/index.html 1958 GMC.Project Build http://67-72chevytrucks.com/vboard/s...d.php?t=162816 1966 Chevelle Build http://67-72chevytrucks.com/vboard/s...d.php?t=443576 Video http://www.youtube.com/watch?v=prrNKo8F7Zw#GU5U2spHI_4

04-01-2009, 02:37 AM	#24
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: My long term 57 project Great job on the truck so far, too bad it had to sit for 3 years, imagine what would have been done, it looks like you have the same brackets and pulleys on your engine as i do, from Bills hot rod company, nice stuff. __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

04-01-2009, 09:23 AM	#25
ChuckDriver A320 Pilot/USAF Retired Join Date: Mar 2009 Location: Charleston, SC Posts: 2,629	Re: My long term 57 project Thanks nuke1! Yes the three years it sat did slow down the process but i'ts been worth it. I really enjoy working on it when I get the time between work and family. The pulley's actually came from Summit and the brackets are from Alan Grove. The brackets fit perfect!! I need to get going of the AC and I'll be ordering the brackets from him as well. I've been trying to add more pic's but they want resize for me and I have no idea how to do it myself. __________________ JJ My 1957 build: http://67-72chevytrucks.com/vboard/s...d.php?t=334552 http://www.trifive.com/forums/showthread.php?t=22037 Instagram - Chuckdriver57

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.