77 14FF I/O Brg Nut & Axle Flange Torques? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

trukman1 · 03-21-2002, 01:47 AM

Does anyone have a manual that tells the torque specs for the inner and outer bearing nuts both initial tightening spec, what you back off and retorque to and how much to back off ( 1/8 - 1/4 turn, etc.) to finish. Also would like to know the torque specs for the axle flange bolts if you have them. Thanks in advance for any and all help, Gary

*Fast68Chevy* · 03-22-2002, 12:17 AM

maybe coloradok5 blazer guys may know, tjhey are 14 bolt nuts, no pun intended

03-21-2002, 01:47 AM	#1
trukman1 Registered User Join Date: Apr 2001 Location: Beavercreek, Ohio 45431 Posts: 737	77 14FF I/O Brg Nut & Axle Flange Torques? Does anyone have a manual that tells the torque specs for the inner and outer bearing nuts both initial tightening spec, what you back off and retorque to and how much to back off ( 1/8 - 1/4 turn, etc.) to finish. Also would like to know the torque specs for the axle flange bolts if you have them. Thanks in advance for any and all help, Gary __________________ 1967 K30 461/TH400/Np205/D60/14FF/BDS MTZ 375/75/16 on 16x10 Pro Comps

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-22-2002, 12:17 AM	#2
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	maybe coloradok5 blazer guys may know, tjhey are 14 bolt nuts, no pun intended



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.