Wing Window Vibration (from sterio) ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PHOENIX · 03-13-2003, 04:38 PM

I guess Im pretty lucky because the only things that make noise (rattle) when the sterio is pumping is the wing window (driver only, atleast that I can hear

) and the door windows. The door windows are not an issue because I need new channel all the wa around except for the very bottom. I kow this will fix that problem.
I notice that the little pin in the wing window (upper pin/pivot point) is what is causing this rattle sound. If I put my finger on the pin, ever so slightly, the rattle stops. Anyone else had this problem? What can I do to fix this problem? Ohh yeah, it only does it when the wing window is open, I dont seem to notice it when its closed.

thanks!

Slonaker · 03-13-2003, 06:03 PM

I think they sell replacement rivets at LMC, so the dealer probably has them as well.

Can you tighten the rivet up with a ball peen hammer? Watch the glass!

Slonaker

PHOENIX · 03-13-2003, 06:17 PM

Do you think its loose and thats why is rattles?
I would think it would have to have some play to allow it to pivot.
It doesnt seem loose, and when I push it with my finger it doesnt move, it just stops rattling. im going to look at it better tonight and see if it looks loose or anything compared to the other side.

apstguy · 03-13-2003, 07:59 PM

Uhhhh.... simple. Don't open the wing window!

Slonaker · 03-13-2003, 09:02 PM

I just assumed it was loose because you said it rattled...

Slonaker

c10scotty · 03-13-2003, 10:05 PM

ya i never open mine, my window rattles though...i just grabbed a scrap piece of window channel thati had lyin around and stuffed it in there but i think thats wore out now so i need to redo it

84Stepper · 03-13-2003, 10:50 PM

Rattling sucks!! My door rattles all of the time and I was wondering if anyone has used that spray on sound deadner? If so does the stuff work? Since I have my door panels off I was thinking about spraying that stuff all over to stop Rattling.

PHOENIX · 03-14-2003, 01:24 PM

84stepper Im sure it would help, but do you know whats actually rattling? Windows are the most common. New seals all around the windows helps a ton!

So nobody has any ideas other then, dont open it

Did you forget that its hot here? The wing is like a life saver

BigRed · 03-14-2003, 03:41 PM

You can buy new seals and rivets(pins) for those wing windows. They make a tool that you can also buy (cheap) to replace the rivet. I would replace that pin and see if that helps you out. If not, you may just need a new vent window assembly. It's probably just worn out.

gchemist · 03-14-2003, 08:52 PM

I replaced all the window channels, door seals and modified the vent windows. No wind noise or vibratios. Most of my system stays in side the cab.

Ever see a windshield vibrate.

twistedmetal · 03-15-2003, 05:11 AM

Use 2 hammers ,one on each side of the rivit,give gentle taps till its mushroomed enough.

Quote:

"If Fall Guy only knew how many trucks i wrecked,He'd be proud"

03-13-2003, 04:38 PM	#1
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	Wing Window Vibration (from sterio) ? I guess Im pretty lucky because the only things that make noise (rattle) when the sterio is pumping is the wing window (driver only, atleast that I can hear ) and the door windows. The door windows are not an issue because I need new channel all the wa around except for the very bottom. I kow this will fix that problem. I notice that the little pin in the wing window (upper pin/pivot point) is what is causing this rattle sound. If I put my finger on the pin, ever so slightly, the rattle stops. Anyone else had this problem? What can I do to fix this problem? Ohh yeah, it only does it when the wing window is open, I dont seem to notice it when its closed. thanks! __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION *

03-13-2003, 06:03 PM	#2
Slonaker Insert Witty Text Here Join Date: Oct 2002 Location: San Antonio, TX Posts: 3,415	I think they sell replacement rivets at LMC, so the dealer probably has them as well. Can you tighten the rivet up with a ball peen hammer? Watch the glass! Slonaker __________________ '86 Chevy C10 (Sold 04/19/13 ) Stock '01 Silverado

03-13-2003, 06:17 PM	#3
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	Do you think its loose and thats why is rattles? I would think it would have to have some play to allow it to pivot. It doesnt seem loose, and when I push it with my finger it doesnt move, it just stops rattling. im going to look at it better tonight and see if it looks loose or anything compared to the other side. __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION *

03-13-2003, 07:59 PM	#4
apstguy LED King Join Date: Jan 2003 Location: Sacramento, CA Posts: 2,088	Uhhhh.... simple. Don't open the wing window! __________________ Tyler 1985 C10 305 w/ Bowtie OD TH700R4 3.42 LSD 202,000 miles 2006 Ford Focus ZX3 5-speed Stick 2016 Chevy Spark EV Gone: 2002.5 VW GTI 24v VR6 Gone: 2008 VW R32

03-13-2003, 09:02 PM	#5
Slonaker Insert Witty Text Here Join Date: Oct 2002 Location: San Antonio, TX Posts: 3,415	I just assumed it was loose because you said it rattled... Slonaker __________________ '86 Chevy C10 (Sold 04/19/13 ) Stock '01 Silverado

03-13-2003, 10:05 PM	#6
c10scotty ~THE SILVER BULLET~ Join Date: Oct 2002 Location: WYOMING Posts: 285	ya i never open mine, my window rattles though...i just grabbed a scrap piece of window channel thati had lyin around and stuffed it in there but i think thats wore out now so i need to redo it __________________ ~1980 c10 chevy scottsdale~ ~2.5/4 drop 305/th350c~

03-13-2003, 10:50 PM	#7
84Stepper Registered User Join Date: Feb 2003 Location: Edmond, Oklahoma Posts: 425	Rattling sucks!! My door rattles all of the time and I was wondering if anyone has used that spray on sound deadner? If so does the stuff work? Since I have my door panels off I was thinking about spraying that stuff all over to stop Rattling. __________________ 84 Chevy Stepside, 350, TH350, 268h Comp cam, Hooker headers, MSD Pro Billet, Edelbrock Performer manifold and 1604 carb, 40 Series Flowmasters dumped, and Western Chassis 3/5 drop w/ c notch. New 3:73 Eaton Posi

03-14-2003, 01:24 PM	#8
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	84stepper Im sure it would help, but do you know whats actually rattling? Windows are the most common. New seals all around the windows helps a ton! So nobody has any ideas other then, dont open it Did you forget that its hot here? The wing is like a life saver __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION *

03-14-2003, 03:41 PM	#9
BigRed Registered User Join Date: Jun 2002 Location: DFW, TX Posts: 1,680	You can buy new seals and rivets(pins) for those wing windows. They make a tool that you can also buy (cheap) to replace the rivet. I would replace that pin and see if that helps you out. If not, you may just need a new vent window assembly. It's probably just worn out. __________________ Scott Shelbourne

03-14-2003, 08:52 PM	#10
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	I replaced all the window channels, door seals and modified the vent windows. No wind noise or vibratios. Most of my system stays in side the cab. Ever see a windshield vibrate. __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos Last edited by gchemist; 03-15-2003 at 06:53 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.