69 Chevy step for sale (powdercoated frame) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

8mpg · 04-04-2009, 07:54 PM

Well, Im selling the project. I dont have the money to even work on it now. Looking to get $1800 for the truck...no motor, no trans. Plan was for a Cummins diesel motor (still have it....motor and 5spd for $2500 extra)

The best part about the truck is the powdercoated frame. It was blasted and powdercoated black. The control arms, rear end, crossmembers, and trailing arms were all professionally powdercoated.

Suspension is all new...the shocks have a slight bit of surface rust on the tubes from sitting outside. Springs are new as well.

New front disc brakes..look a bit rusty from sitting.

The cab is very solid with some slight pinholes in the floor on the outer edges. They could all be patched. The rockers are in pretty good shape from the outside but not as great from the inside. Door are solid and in great shape. I stripped the cab down to metal and smoothed the firewall. It is in epoxy primer right now. Hood is in good shape, the fenders needs patching. I have a great 68 front clip to go with the truck (no inner fenders). The bed is in decent shape, I was going to swap to a wide bed. Could use some blasting.

Set of Dodge split bench seats to go with it and new covers still in the package to go on them. Lots of extra parts to go with it... I will try and get pics of tonight...might be tomorrow.

Not looking to part it out.

Tim
Southlake, TX 76092

8mpg · 04-04-2009, 08:01 PM

my67chevytruck · 04-04-2009, 11:59 PM

Tim, sorry to see that it has togo.
Bttt, for a great guy to deal with!

**special-K** · 04-05-2009, 06:40 AM

Hey,I`m in the same boat.How long has your`s been sitting?I`ve had my frame done since 10/06.I know how it is.Good deal and good luck to ya.

I sure wish I could take the motor/trans off your hands.Wanna trade a rolling frame/cab/clip/bed for it?

smoky02 · 04-06-2009, 12:31 AM

Would you sell just the frame by any chance?

8mpg · 04-06-2009, 01:18 AM

Quote:

Originally Posted by smoky02

Would you sell just the frame by any chance?

I guess I could... Had the rolling chassis for sale for $1500 before...would take $1400

smoky02 · 04-06-2009, 10:25 AM

Can you tell me the specks on the frame? Also did you have the rear end rebuilt? What gears are in it? Does the front end have drop spindles?

8mpg · 04-06-2009, 10:57 AM

Rear end is rebuilt...honestly forgot what gears are in it..I think I might still have the box. Standard height spindles.

smoky02 · 04-06-2009, 01:45 PM

Oh ok...do you remember if it was a posi or not? And just a shot in the dark...you aren't planning on heading to FL or a vaca or anything soon are you?

04-04-2009, 07:54 PM	#1
8mpg Registered User Join Date: Aug 2008 Location: DFW, Texas Posts: 389	69 Chevy step for sale (powdercoated frame) Well, Im selling the project. I dont have the money to even work on it now. Looking to get $1800 for the truck...no motor, no trans. Plan was for a Cummins diesel motor (still have it....motor and 5spd for $2500 extra) The best part about the truck is the powdercoated frame. It was blasted and powdercoated black. The control arms, rear end, crossmembers, and trailing arms were all professionally powdercoated. Suspension is all new...the shocks have a slight bit of surface rust on the tubes from sitting outside. Springs are new as well. New front disc brakes..look a bit rusty from sitting. The cab is very solid with some slight pinholes in the floor on the outer edges. They could all be patched. The rockers are in pretty good shape from the outside but not as great from the inside. Door are solid and in great shape. I stripped the cab down to metal and smoothed the firewall. It is in epoxy primer right now. Hood is in good shape, the fenders needs patching. I have a great 68 front clip to go with the truck (no inner fenders). The bed is in decent shape, I was going to swap to a wide bed. Could use some blasting. Set of Dodge split bench seats to go with it and new covers still in the package to go on them. Lots of extra parts to go with it... I will try and get pics of tonight...might be tomorrow. Not looking to part it out. Tim Southlake, TX 76092 Last edited by 8mpg; 04-04-2009 at 07:54 PM.

04-04-2009, 08:01 PM	#2
8mpg Registered User Join Date: Aug 2008 Location: DFW, Texas Posts: 389	Re: 69 Chevy step for sale (powdercoated frame)

04-04-2009, 11:59 PM	#3
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: 69 Chevy step for sale (powdercoated frame) Tim, sorry to see that it has togo. Bttt, for a great guy to deal with! __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

04-05-2009, 06:40 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 69 Chevy step for sale (powdercoated frame) Hey,I`m in the same boat.How long has your`s been sitting?I`ve had my frame done since 10/06.I know how it is.Good deal and good luck to ya. I sure wish I could take the motor/trans off your hands.Wanna trade a rolling frame/cab/clip/bed for it? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-06-2009, 12:31 AM	#5
smoky02 Registered User Join Date: Oct 2003 Location: Sunny, Florida, some might call it South Alabama Posts: 834	Re: 69 Chevy step for sale (powdercoated frame) Would you sell just the frame by any chance? __________________ Just sold my C10...sad day... Looking for a 1972 Blazer to hopefully fill the hole in my heart.

04-06-2009, 10:25 AM	#7
smoky02 Registered User Join Date: Oct 2003 Location: Sunny, Florida, some might call it South Alabama Posts: 834	Re: 69 Chevy step for sale (powdercoated frame) Can you tell me the specks on the frame? Also did you have the rear end rebuilt? What gears are in it? Does the front end have drop spindles? __________________ Just sold my C10...sad day... Looking for a 1972 Blazer to hopefully fill the hole in my heart.

04-06-2009, 10:57 AM	#8
8mpg Registered User Join Date: Aug 2008 Location: DFW, Texas Posts: 389	Re: 69 Chevy step for sale (powdercoated frame) Rear end is rebuilt...honestly forgot what gears are in it..I think I might still have the box. Standard height spindles.

04-06-2009, 01:45 PM	#9
smoky02 Registered User Join Date: Oct 2003 Location: Sunny, Florida, some might call it South Alabama Posts: 834	Re: 69 Chevy step for sale (powdercoated frame) Oh ok...do you remember if it was a posi or not? And just a shot in the dark...you aren't planning on heading to FL or a vaca or anything soon are you? __________________ Just sold my C10...sad day... Looking for a 1972 Blazer to hopefully fill the hole in my heart.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.