4-5-6 Chevy Truck parts

[rayce08]

hey tony , maybe i missed it but what does a driver and pass. door run , rust free ( dont mind fixing dents ) shipped to 36575 ? thanks

[LILRED66]

Originally Posted by rayce08

hey tony , maybe i missed it but what does a driver and pass. door run , rust free ( dont mind fixing dents ) shipped to 36575 ? thanks

I sell good, used, repaired door shells for $175.00, plus packaging & shipping, via Greyhound-Freight, that usually runs $65.00 each. When receiving items, via Greyhound-Freight, the buyer must pick-up the items at the terminal nearest your location. This is the most economical method I have found to ship large items, like door shells and fenders.

I do the panel repairs on any rusty areas in my shop. I also weld any non-stock mirror holes or other imperfections. I do not skim-coat or primer anything, because most body shops want to see the virgin sheet metal, prior to doing any preparations for bodywork, primer or paint.

I also offer a $40.00 core credit for a rusty door shell. This is based on the door shell being repairable. Also, I sell the door shell only, due to the lighter weight of shipping without the glass, innards and hardware.

Please let me know if I can help you with these items or other 4-5-6 Chevy trucks parts in the future and thanks for the opportunity.

[rayce08]

do u have shells that have no rust ( not repaired ) ?

[LILRED66]

Originally Posted by rayce08

do u have shells that have no rust ( not repaired ) ?

Thanks for the inquiry. At this time, I don't have any unmolested, zero-rust, zero-dents, zero blemishes door shells. When I do, they don't last long and they go for $300.00 each.

Sorry I couldn't help you with this item, but please keep me in mind for other 4-5-6 Chevy truck parts in the future.

PS - If you find some good, unmolested, original door shells with on damage of any kind, snag them up, because they are almost extinct and mighty costly.

[LILRED66]

Spring is here...anyone need any parts for their project? Do you need your fender tails repaired or the rust in the floorboards of your cab? I do patch panel repairs.

Please let me know if I can help you with anything 4-5-6 Chevy truck related and thanks for the opportunity.

[Rafael505]

Where you at? I need rocker panels L/R, upper foot floor/panel L/R repaired on my 67, I'll have to find someone out here in NM to have it done,

[Rafael505]

also what am I looking at as far as price?

[LILRED66]

Thanks for the reply. I only work on '60-'66 Chevy trucks. I am in Kansas City, KS, so I am geographically undesireable to do work on your cab, but please let me know if I can help you with any 4-5-6 Chevy truck parts in the future.

[Apache63]

do u have a automatic steering column for my 61 Panel??

[RWilliams]

Hello Tony,

I hate to bother you with such a small request, but I am having no luck finding the parts I need. I am looking for two bolts. These are used to bolt the front fender onto the frame; where the fender meets at the door. There are two of these that are used at the top of the fender, and the same bolt is used at the bottom of the fender as well.

The overall length of the bolt is 1 1/2" long. I believe that it is 3/8" in size and has very fine threads and a 9/16" head. The bolt also has a thick washer made onto it.

I can send you a image of the bolt if it is unclear which bolts I am referring to, or I'll check my Assembly Manual to see if it refers to a part number.

Could you please let me know if you have two of these available that are in good condition? Thanks !

[TwoFiftyShifter]

Spring is here! Do you have any stepside bed cross sills? The strips that go horizontally accross the bed?

[LILRED66]

Originally Posted by RWilliams

Hello Tony,

I hate to bother you with such a small request, but I am having no luck finding the parts I need. I am looking for two bolts. These are used to bolt the front fender onto the frame; where the fender meets at the door. There are two of these that are used at the top of the fender, and the same bolt is used at the bottom of the fender as well.

The overall length of the bolt is 1 1/2" long. I believe that it is 3/8" in size and has very fine threads and a 9/16" head. The bolt also has a thick washer made onto it.

I can send you a image of the bolt if it is unclear which bolts I am referring to, or I'll check my Assembly Manual to see if it refers to a part number.

Could you please let me know if you have two of these available that are in good condition? Thanks !

Good morning. I know which bolts you need. I have several of them. Send me your mailing address and I will send two of them to you for the cost of shipping. Thanks for the opportunity and let me know if I can help you with this item or other 4-5-6 Chevy truck parts in the future.

[LILRED66]

Originally Posted by Apache63

do u have a automatic steering column for my 61 Panel??

Good morning and sorry for my delay in replying to your request. I have a good, used factory automatic steering column. Shipping is going to be an issue to Germany. A good, used factory automatic steering column is $140.00, plus the cost of packaging & shipping, which I am not sure what that will be. I can check on it and let you know.

Please let me know if I can help you with this item or other 4-5-6 Chevy truck parts in the future and thanks for the opportunity.

[LILRED66]

Originally Posted by TwoFiftyShifter

Spring is here! Do you have any stepside bed cross sills? The strips that go horizontally accross the bed?

Ron:

Good morning and thanks for the inquiry. I have a few good, used sets of swb stepside cross sills. A complete set is $100.00, plus $55.00 packaging & shipping, via UPS or FedEx.

Please let me know if I can help you with this item or other 4-5-6 Chevy truck parts in the future and thanks for the opportunity.

[RWilliams]

Hello Tony,

I sent you a private message with the shipping address, so let me know when you have the total cost.

Thanks,

[LILRED66]

Robby:

Reply sent and thanks for the opportunity.

[Apache63]

Originally Posted by LILRED66

Good morning and sorry for my delay in replying to your request. I have a good, used factory automatic steering column. Shipping is going to be an issue to Germany. A good, used factory automatic steering column is $140.00, plus the cost of packaging & shipping, which I am not sure what that will be. I can check on it and let you know.

Please let me know if I can help you with this item or other 4-5-6 Chevy truck parts in the future and thanks for the opportunity.

Hey Toni , it would be great if you could find out what the shipping to Germany is!!

have some pic´s from the column??

Thanks
Pat

[LILRED66]

Originally Posted by Apache63

Hey Toni , it would be great if you could find out what the shipping to Germany is!!

have some pic´s from the column??

Thanks
Pat

Pat:

The packaging & shipping, based on a $140.00 value, is $105.00, via UPS, with all duties and taxes due and payable by you on your end. This item can be shipped to you with no returns, credits or refunds, due to the duties, taxes and costs of shipping.

Please let me know if I can help you with this item or other 4-5-6 Chevy truck parts in the future and thanks for the opportunity.

[LILRED66]

Originally Posted by RWilliams

Hello Tony,

I sent you a private message with the shipping address, so let me know when you have the total cost.

Thanks,

The bolts were shipped yesterday. Thanks for your business and please let me know if I can help you with other 4-5-6 Chevy truck parts in the future.

[sleazytiki]

Hey! Have you got an upper rear shock mount for the passenger side of a
65? I have coils not leaf springs if that matters.
I'm also looking for step-side fenders in any condition. Thanks!

[LILRED66]

Originally Posted by sleazytiki

Hey! Have you got an upper rear shock mount for the passenger side of a
65? I have coils not leaf springs if that matters.
I'm also looking for step-side fenders in any condition. Thanks!

Good evening and thanks for the inquiry. I have a good, used upper shock mount for the rear of a 4-5-6 Chevy truck with factory coils/trailing arms.

I also have a pair of stepside rear fenders. The passenger side is in very good, rust-free, dent-free condition and the driver side has some body dolly work done on the front lower portion, but is also rust-free. I'm afraid shipping is going to be a bear from Kansas City to the the Jersey shore.

I would ship them Greyhound-Freight, since that is the most economical method, which would require you to pick them up at the nearest Greyhound terminal in your area.

The good, used stepside rear fenders are $300.00 per pair and I estimate the shipping, via Greyhound-Freight, to be $70.00 each or a total of $140.00 for freight charges.

If you decide to move forward with the stepside rear fenders, I will throw in the rear upper shock mount for free, otherwise, it is $20.00, including shipping.

Please let me know if I can help you with these items or other 4-5-6 Chevy truck parts in the future and thanks for the opportunity.

Happy Easter.