Lots Of NIB Parts For Sale - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**rob32472** · 01-22-2009, 09:24 PM

Sorry guys i am out for the harness found it somewhere else thanks

tommypic · 01-23-2009, 07:05 AM

pm sent on the harness

71chevytruckguy · 01-23-2009, 05:21 PM

For everybody interested in the wiring harness, olskoolchevy said he'd take. If for some reason things don't work out, tommypic is next.

71chevytruckguy · 01-23-2009, 05:31 PM

sbrad701 - They're made by CNC Motorsports. One of my buddies said he'd take them but I'll check with hime tonight and let you know tomorrow. Here's a link to their webiste. Chris.

http://www.cnc-motorsports.com/produ...86&CtgID=14982

sbrad701 · 01-23-2009, 05:42 PM

np Chris. Let me know. I'm just right around the corner from ya and will be up that way this weekend if your bud don't want em.

Thanks

Scott

71chevytruckguy · 01-23-2009, 09:33 PM

Painless harness sold

71chevytruckguy · 01-24-2009, 06:33 PM

sbrad701 - My buddy passed on the rockers. You can come pickup then up any time this weekend. PM sent with my adress and phone number. Thanks. Chris.

finch · 01-25-2009, 01:56 AM

got the goods on like wed. super fast shipping!! and nothing broke! ha. bump for cnc motorsports... they do good work.

71chevytruckguy · 01-25-2009, 02:48 AM

That was quick, shipped then on tuesday. Glad everything got there in once piece. Thanks. Chris.

Redden05 · 02-09-2009, 11:05 PM

I am interested in the 200S wheels. What is the backspacing?

71chevytruckguy · 03-24-2009, 10:48 PM

Reddon- B/S is 5.5" I think. I'll have to go and check if your still interested. Sorry for the slow reply. Chris

Redden05 · 03-25-2009, 04:06 PM

Quote:

Originally Posted by 71chevytruckguy

Reddon- B/S is 5.5" I think. I'll have to go and check if your still interested. Sorry for the slow reply. Chris

Yea, I would still be interested if you could go measure it for me. Thanks.

Redden05 · 04-09-2009, 08:45 PM

Did you measure the backspace on the wheels yet?

71chevytruckguy · 04-10-2009, 04:22 PM

Redden- Backspacing is 4.5" just went and checked it. Chris.

bmrrwolfe · 04-11-2009, 09:39 PM

Can i get pics and shipping to 44145 for the chrome oil pan?
Thanks!

71chevytruckguy · 04-13-2009, 08:11 PM

wolfe - Not a problem. Ill get some pics up tomorrow. Chris.

bmrrwolfe · 04-13-2009, 09:35 PM

Quote:

Originally Posted by 71chevytruckguy

wolfe - Not a problem. Ill get some pics up tomorrow. Chris.

thanks!

Redden05 · 04-14-2009, 09:03 PM

I am going to pass on the wheels. Thanks for the info. David.

01-22-2009, 09:24 PM	#26
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,504	Re: Lots Of NIB Parts For Sale Sorry guys i am out for the harness found it somewhere else thanks

01-23-2009, 07:05 AM	#27
tommypic Registered User Join Date: Jan 2008 Location: Piedmont , SC Posts: 728	Re: Lots Of NIB Parts For Sale pm sent on the harness __________________ My ZipCode = 29673 2008 Silverado Z71 LTZ Wrecked New Ride SOLD 71-72 Custom A/C Parts Truck < selling parts 67 Chevy ShortStep SOLD 67 GMC SWB Step <-- For Sell 67 Chevy SWB Step <-- working on 2000 Road King <-- SOLD 97 F150 my ride for now 2006 Escape wifes ride HELP SUPPORT THE BOARD http://67-72chevytrucks.com/vboard/payments.php Great How To Thread http://67-72chevytrucks.com/vboard/s...d.php?t=157669 Vendor Sites http://67-72chevytrucks.com/links/browselinks.php?c=2

01-23-2009, 05:21 PM	#28
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: Lots Of NIB Parts For Sale For everybody interested in the wiring harness, olskoolchevy said he'd take. If for some reason things don't work out, tommypic is next. __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's

01-23-2009, 05:31 PM	#29
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: Lots Of NIB Parts For Sale sbrad701 - They're made by CNC Motorsports. One of my buddies said he'd take them but I'll check with hime tonight and let you know tomorrow. Here's a link to their webiste. Chris. http://www.cnc-motorsports.com/produ...86&CtgID=14982 __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's

01-23-2009, 05:42 PM	#30
sbrad701 Registered User Join Date: Mar 2005 Location: Graham, NC Posts: 23	Re: Lots Of NIB Parts For Sale np Chris. Let me know. I'm just right around the corner from ya and will be up that way this weekend if your bud don't want em. Thanks Scott __________________ If It'll roll I'll race it!!!

01-23-2009, 09:33 PM	#31
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: Lots Of NIB Parts For Sale Painless harness sold __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's

01-24-2009, 06:33 PM	#32
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: Lots Of NIB Parts For Sale sbrad701 - My buddy passed on the rockers. You can come pickup then up any time this weekend. PM sent with my adress and phone number. Thanks. Chris. __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's Last edited by 71chevytruckguy; 01-25-2009 at 02:49 AM.

01-25-2009, 01:56 AM	#33
finch Registered User Join Date: Dec 2007 Location: Sioux Falls, SD Posts: 365	Re: Lots Of NIB Parts For Sale got the goods on like wed. super fast shipping!! and nothing broke! ha. bump for cnc motorsports... they do good work. __________________ Andy... '70 C/10 Under Construction http://67-72chevytrucks.com/vboard/s...d.php?t=298553 '71 K/20 Frame-off resto, SOLD!!! http://67-72chevytrucks.com/vboard/c...ct=2399&cat=12 '05 Silverado Z-71, CC SB, Daily Driver

01-25-2009, 02:48 AM	#34
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: Lots Of NIB Parts For Sale That was quick, shipped then on tuesday. Glad everything got there in once piece. Thanks. Chris. __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's

02-09-2009, 11:05 PM	#35
Redden05 Registered User Join Date: Jan 2007 Location: Watsontown PA 17777 Posts: 1,196	Re: Lots Of NIB Parts For Sale I am interested in the 200S wheels. What is the backspacing?

03-24-2009, 10:48 PM	#36
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: Lots Of NIB Parts For Sale Reddon- B/S is 5.5" I think. I'll have to go and check if your still interested. Sorry for the slow reply. Chris __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's

04-09-2009, 08:45 PM	#38
Redden05 Registered User Join Date: Jan 2007 Location: Watsontown PA 17777 Posts: 1,196	Re: Lots Of NIB Parts For Sale Did you measure the backspace on the wheels yet?

04-10-2009, 04:22 PM	#39
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: Lots Of NIB Parts For Sale Redden- Backspacing is 4.5" just went and checked it. Chris. __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's

04-11-2009, 09:39 PM	#40
bmrrwolfe 1970 C10 Join Date: Dec 2007 Location: Cleveland Ohio Posts: 212	Re: Lots Of NIB Parts For Sale Can i get pics and shipping to 44145 for the chrome oil pan? Thanks!

04-13-2009, 08:11 PM	#41
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: Lots Of NIB Parts For Sale wolfe - Not a problem. Ill get some pics up tomorrow. Chris. __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's



Register or Log In To remove these advertisements.

04-14-2009, 09:03 PM	#43
Redden05 Registered User Join Date: Jan 2007 Location: Watsontown PA 17777 Posts: 1,196	Re: Lots Of NIB Parts For Sale I am going to pass on the wheels. Thanks for the info. David.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.