![]() |
![]() |
#1 |
Registered User
Join Date: Feb 2008
Location: Shawano, WI
Posts: 94
|
Looking tonight
Hey everyone, looking at a 71 C10 this evening. We've been looknig at two options, wait a while and save up more money to buy something nice. Or find a solid truck with a lot of Patina, yes I like the look.
Being in Wisconsin, we don't have a lot of Patina trucks. Just rust. I found this truck last year and the guy still has it. He's asking $575 for it. The top will come off....see if we can do that before buying to lower the price. Straight six, 4 on floor. Rockers and corners were previously replaced and solid. I currently have a 76, but have been around the previous generation for a while. What other places should I be looking at outside of the trailing arms. I've already seen trucks with nasty trailing arm repairs. |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Aug 2006
Location: Minnesota
Posts: 943
|
Re: Looking tonight
I really like the patina on that. Drop it and drive it. From what I have seen is rust above the rear coils on the frame, inside and outside around the cab roof edges and firewall around the heater box. From the pic it looks like a good buy there are alot of parts there.
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Feb 2008
Location: Shawano, WI
Posts: 94
|
Re: Looking tonight
Forgot to metion plans......
The truck has been sitting for 2 years. So first would be a tune up, change all fluids, new battery. No big deal. Then a drop would be the first option. Air bags will be in the future once some bonus's improve....HA. Gut just a static drop for this year. I've seen a lot of patina trucks with just the rims painted. Not sure what color would look good with the blue. So open to sugestions. Thanks for the notes on the rust, I'll be paying attention to the rear suspension and frame. There is a small hole in the floor.....I don't mind easy repairs. |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Aug 2008
Location: GB WI
Posts: 68
|
Re: Looking tonight
Decent looking find for WI. let me know if you need any parts I might have a few extra, Im not far from you.
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Feb 2008
Location: Shawano, WI
Posts: 94
|
Re: Looking tonight
Thanks...I'll let you konw if I'm looking for anything. Hopefully it won't need much...depends on where I want to take it.
I'm in GB all the time. Just looking forward to some warmer weather and the car show season to start. |
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Aug 2006
Location: Minnesota
Posts: 943
|
Re: Looking tonight
Whats the verdict? I really like the patina look of that. Whats up with the grille??
|
![]() |
![]() |
![]() |
#7 |
Nothing to see here.....
![]() Join Date: Jun 2007
Location: Shawnee, KS
Posts: 4,625
|
Re: Looking tonight
ditch the mid 80's Chevrolet truck grille, fire it up, throw a nice drop on it, and go!
also check the front and rear cab supports and make sure they are at least somewhat solid. trailing arms can be replaced. and like ram-man said, check the cab roof edges. get inside and pull back the rubber windshield moulding on the top corners. that can also be a nasty place for rust to show up. make sure you tell us if you get her!
__________________
Doug ![]() ![]() The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: May 2007
Location: Buffalo MN
Posts: 606
|
Re: Looking tonight
you may wanna take a peak under the cab and see if it has any cab supports left, seing as the rockers and corners have already been replaced
check the core suport underneath the battery tray if you havent already while your underneath it looking at the rear suspension and frame check the bed floor braces to make sure they arnt about to crumble with the hood open look for visible rust on the firewall and near the heater box/fan on the passenger side from the picture deffinately looks like a nice project good luck on the buy nate
__________________
Trial and Error, its expensive but its a mistake i most likely wont make again 1971 chevy k10 custom deluxe http://67-72chevytrucks.com/vboard/s...d.php?t=341257 1968 chevy k/10 fleet http://67-72chevytrucks.com/vboard/s...d.php?t=334731 1948 desoto custom coupe fluid drive(family heirloom) |
![]() |
![]() |
![]() |
#9 | |
Registered User
Join Date: Mar 2008
Location: N.C.
Posts: 250
|
Re: Looking tonight
Quote:
__________________
If it ain't a chevy,I don't want it |
|
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Feb 2008
Location: Shawano, WI
Posts: 94
|
Re: Looking tonight
The verdict is a no. The interesting thing was there was a different door on the drivers side, Dark blue. I would have loved dealing with just a patina truck if it all matched. But it would have been more work to get that door to match. Gas cap was off, so I'm sure there is a years worth of rust and water. There was rust on the inside of the cab around the top. Also, the passenger rocker needed to be replace.
But if that drivers door would have matched, I could have dealt with the other details. Engine was clean. Rebuilt, drain the tank and I'm sure it woud run. The firewall was spotless. YES not a single rust spot. That was really clean. Frame and trailing arms looked good. If I wanted a project to rip apart and replace the body, this would be a great start. But unfortunately I don't have the room right now to devote to that detail. Anyone looking for a great project in our area...let me know and I will get you the contact info. In the meantime, my search continues. My folks are in Florida for a couple more weeks. So, I may still have luck there. |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Aug 2008
Location: GB WI
Posts: 68
|
Re: Looking tonight
Hey lukbrw I would like to take a look at that truck and see
if there is any thing I need our board members need. Send info to njw4601@yahoo.com, Thanks. |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|