Price Guide? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cam · 03-20-2003, 12:34 PM

Is there any sort of price guide out there for 67 -72 pickups? My 17 yr old son ran across a 72 short bed (350, 4spd on the floor, trim package). It definitely needs the front passenger quarter panel replaced and the door skin on the same side. One of the rockers needs to be replaced. The rest of it seems to have some surface rust from place to place but is straight. The guy want's $2500. I really don't know if this is too much or not. The truck has 110,000 miles and they installed a new goodwrench engine about 40,000 miles ago. Your thoughts?

Thanks

progress · 03-20-2003, 12:50 PM

That seems a little high for part of the country. In the rust belt that might be a really smoking deal but in your area you should be able to do better. Is it mechanically perfect? How about the interior. If you could post some pictures we might be able to help you a little more. What other options does the truck have on it? Air, posi? Fleetside or stepside?

**too much stuff** · 03-20-2003, 12:52 PM

That price doesn't seem out of line, if it runs/drives good, and cab mounts and trailing arm are in decent shape. You can always make an offer, cash talks!

Blue Beard · 03-20-2003, 01:20 PM

I generally pickup Old Cars Price Guide, since we have to go by that to title a car anymore in washington.

You could also check with hemmings.....

03-20-2003, 12:34 PM	#1
cam Registered User Join Date: May 2002 Location: Helena, MT, USA Posts: 64	Price Guide? Is there any sort of price guide out there for 67 -72 pickups? My 17 yr old son ran across a 72 short bed (350, 4spd on the floor, trim package). It definitely needs the front passenger quarter panel replaced and the door skin on the same side. One of the rockers needs to be replaced. The rest of it seems to have some surface rust from place to place but is straight. The guy want's $2500. I really don't know if this is too much or not. The truck has 110,000 miles and they installed a new goodwrench engine about 40,000 miles ago. Your thoughts? Thanks __________________ 1970 GMC 1/2 ton 307 4spd 1970 dorF dump runner

03-20-2003, 12:50 PM	#2
progress Gotta luv a clean shave Join Date: Jan 2002 Location: Kent, WA Posts: 226	That seems a little high for part of the country. In the rust belt that might be a really smoking deal but in your area you should be able to do better. Is it mechanically perfect? How about the interior. If you could post some pictures we might be able to help you a little more. What other options does the truck have on it? Air, posi? Fleetside or stepside? __________________ Welding while you wait...you can help if you like and it...might even save you a little as long as you don't mess things up! We make house calls too...just like the old days!

03-20-2003, 12:52 PM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,854	price? That price doesn't seem out of line, if it runs/drives good, and cab mounts and trailing arm are in decent shape. You can always make an offer, cash talks!

03-20-2003, 01:20 PM	#4
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	I generally pickup Old Cars Price Guide, since we have to go by that to title a car anymore in washington. You could also check with hemmings..... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.