motor mount & exhaust question... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*project 67 sub* · 05-02-2009, 03:08 AM

will the 73+ motor mount towers work with rams horn manifolds, or will they interfer with the towers? oh! and by the way this is for a 67 c10 burb.

p.s. thanks in advance

**'68OrangeSunshine** · 05-02-2009, 05:23 AM

I don't know either, but I have a white '67 K/10 Sub I want to mount a later BBC in, so I'm interested in mounts too.

*project 67 sub* · 05-02-2009, 12:32 PM

bump

*project 67 sub* · 05-02-2009, 06:06 PM

anyone?

*project 67 sub* · 05-03-2009, 01:57 AM

Ttt

72armyswbtruck · 05-03-2009, 02:14 AM

The mounts will work fine, you just have to allow for the correct clearance. You will need to drill the holes for the bolts thought.

*project 67 sub* · 05-04-2009, 02:40 AM

it already has the 73-87 crossmember and suspension so would i still need to redrill the holes in the top of the frame for the mounts?

*project 67 sub* · 05-04-2009, 04:59 PM

bump

05-02-2009, 03:08 AM	#1
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	motor mount & exhaust question... will the 73+ motor mount towers work with rams horn manifolds, or will they interfer with the towers? oh! and by the way this is for a 67 c10 burb. p.s. thanks in advance

05-02-2009, 05:23 AM	#2
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,504	Re: motor mount & exhaust question... I don't know either, but I have a white '67 K/10 Sub I want to mount a later BBC in, so I'm interested in mounts too. __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.

05-02-2009, 12:32 PM	#3
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: motor mount & exhaust question... bump

05-02-2009, 06:06 PM	#4
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: motor mount & exhaust question... anyone?

05-03-2009, 01:57 AM	#5
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: motor mount & exhaust question... Ttt

05-03-2009, 02:14 AM	#6
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,033	Re: motor mount & exhaust question... The mounts will work fine, you just have to allow for the correct clearance. You will need to drill the holes for the bolts thought. __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

05-04-2009, 02:40 AM	#7
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: motor mount & exhaust question... it already has the 73-87 crossmember and suspension so would i still need to redrill the holes in the top of the frame for the mounts? Last edited by project 67 sub; 05-04-2009 at 02:41 AM.

05-04-2009, 04:59 PM	#8
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: motor mount & exhaust question... bump

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.