driveline questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mike14_07 · 05-05-2009, 01:54 PM

i want to put a 700r4 in my truck i am hoping to get 650 hp w nitrous. do i need lock up or non lock up. who make manual valvebodies for them? will i still have to have a tv cable since i will be running a manual valvebody? or should i just build th350 to handle it. also will ece 5 lug conversion axles, auburn locker and richmond 4.10 with c clips handle this much power? or will i need to get c clip eliminators and custom alloy axles? who makes alloy axles for 68 12 bolt in 5x5 pattern? any help would be appreciate.

mike14_07 · 05-05-2009, 02:02 PM

o and will be making 450-500hp on motor and 100-150 shot. no slicks mainly street use. harldly use nitrous if any.

Myself · 05-05-2009, 03:17 PM

Look into the Turbo 700 kit. It's from Premier or Prestige, or something like that.

big_al_71 · 05-05-2009, 04:06 PM

At 542hp to the crank in my motor I went with a fully built th350, I have a 12bolt with stock axles 373 gears. I did not go with a manual body because I did not want the hastle of shifting as I mainly wanted a street vehicle with some hump..If I decide to start running slicks or what not then I will do mini tubs and have a ford nine inch four link set up.

mike14_07 · 05-05-2009, 04:27 PM

hey big al are you running an

mike14_07 · 05-05-2009, 04:28 PM

hey big al are u running an aftermarket posi? and im guessing ur still using c clips

mike14_07 · 05-05-2009, 04:35 PM

anybody got any info on that kit i cant find it also does any body have any more info

Myself · 05-05-2009, 05:08 PM

How about this? http://www.700r4l60e.com/store/catal...1993-p-41.html

I'll try to find info on that other kit.

big_al_71 · 05-05-2009, 05:22 PM

Quote:

Originally Posted by mike14_07

hey big al are u running an aftermarket posi? and im guessing ur still using c clips

Yes I have the c-clips, 373's and an eaton posi unit.....

mike14_07 · 05-05-2009, 10:40 PM

do after maket posi units have openings for c clips?

GMC406 · 05-07-2009, 12:33 AM

Try this site, I have used them, good prices, solid tranny, can make it manual valve body or whatever you like. http://www.outlawtransmissions.com/SearchResults.asp

Heavyest you can build a 700r4 shipped to you with a converter and no core for $1375 seems allright to me.

05-05-2009, 01:54 PM	#1
mike14_07 Registered User Join Date: Dec 2008 Location: Mt. Pleasant, TX Posts: 268	driveline questions i want to put a 700r4 in my truck i am hoping to get 650 hp w nitrous. do i need lock up or non lock up. who make manual valvebodies for them? will i still have to have a tv cable since i will be running a manual valvebody? or should i just build th350 to handle it. also will ece 5 lug conversion axles, auburn locker and richmond 4.10 with c clips handle this much power? or will i need to get c clip eliminators and custom alloy axles? who makes alloy axles for 68 12 bolt in 5x5 pattern? any help would be appreciate.

05-05-2009, 02:02 PM	#2
mike14_07 Registered User Join Date: Dec 2008 Location: Mt. Pleasant, TX Posts: 268	Re: driveline questions o and will be making 450-500hp on motor and 100-150 shot. no slicks mainly street use. harldly use nitrous if any.

05-05-2009, 03:17 PM	#3
Myself Registered User Join Date: Oct 2005 Location: Northern Arkansas Posts: 1,142	Re: driveline questions Look into the Turbo 700 kit. It's from Premier or Prestige, or something like that.

05-05-2009, 04:06 PM	#4
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: driveline questions At 542hp to the crank in my motor I went with a fully built th350, I have a 12bolt with stock axles 373 gears. I did not go with a manual body because I did not want the hastle of shifting as I mainly wanted a street vehicle with some hump..If I decide to start running slicks or what not then I will do mini tubs and have a ford nine inch four link set up. __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

05-05-2009, 04:27 PM	#5
mike14_07 Registered User Join Date: Dec 2008 Location: Mt. Pleasant, TX Posts: 268	Re: driveline questions hey big al are you running an

05-05-2009, 04:28 PM	#6
mike14_07 Registered User Join Date: Dec 2008 Location: Mt. Pleasant, TX Posts: 268	Re: driveline questions hey big al are u running an aftermarket posi? and im guessing ur still using c clips

05-05-2009, 04:35 PM	#7
mike14_07 Registered User Join Date: Dec 2008 Location: Mt. Pleasant, TX Posts: 268	Re: driveline questions anybody got any info on that kit i cant find it also does any body have any more info

05-05-2009, 05:08 PM	#8
Myself Registered User Join Date: Oct 2005 Location: Northern Arkansas Posts: 1,142	Re: driveline questions How about this? http://www.700r4l60e.com/store/catal...1993-p-41.html I'll try to find info on that other kit.

05-05-2009, 10:40 PM	#10
mike14_07 Registered User Join Date: Dec 2008 Location: Mt. Pleasant, TX Posts: 268	Re: driveline questions do after maket posi units have openings for c clips?

05-07-2009, 12:33 AM	#11
GMC406 Professional Grade Join Date: May 2009 Location: Hill City KS Posts: 366	Re: driveline questions Try this site, I have used them, good prices, solid tranny, can make it manual valve body or whatever you like. http://www.outlawtransmissions.com/SearchResults.asp Heavyest you can build a 700r4 shipped to you with a converter and no core for $1375 seems allright to me. __________________ 61 GMC 9' Step Someday it will be a build http://67-72chevytrucks.com/vboard/s...=1#post3356828 67 C-30 Red Dale motorhome http://67-72chevytrucks.com/vboard/s...31#post3845531 71 GMC Street performer in the works Waiting for warm weather http://67-72chevytrucks.com/vboard/s...d.php?t=341946 1990 GMC Sierra GT-sold 1983 chevy 4x4-project on hold maybe sell 1969 Triuph GT 6- sold 1996 Ford I-6 5 Speed 4x4 2004 Dodge Intrepid- milage maker 1959 Ford Fairlaine, factory a/c 292Yblock- sold 1982 Honda XL500R Always lookin for other old trucks!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.