Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
05-14-2009, 05:09 PM | #1 |
Registered User
Join Date: Apr 2008
Location: Sugarland,Tejas
Posts: 356
|
Best DOM supplier in houston Texas
I am looking to build a new pan hard bar, and some 4 link bars, dose anyone know where is the best place to get 1.5 .25 wall DOM tubing in houston texas? Steel Supply wants $30 a foot
__________________
Adam M STX Designs Motorcycles | Choppers | Hotrods |
05-15-2009, 02:02 AM | #2 |
Registered User
Join Date: Aug 2008
Location: simpsonville,sc
Posts: 417
|
Re: Best DOM supplier in houston Texas
$16 a foot at onlinemetals.com,but shipping would prolly kill you
http://www.onlinemetals.com/merchant...83&top_cat=197 |
05-15-2009, 09:54 AM | #3 |
Registered User
Join Date: Apr 2008
Location: Sugarland,Tejas
Posts: 356
|
Re: Best DOM supplier in houston Texas
Thats not a bad price but I can get it for about $8.00 from low rider depot, I was just hoping to find some where local.
__________________
Adam M STX Designs Motorcycles | Choppers | Hotrods |
05-15-2009, 12:22 PM | #4 |
Registered User
Join Date: Apr 2008
Location: Angleton, TX
Posts: 2,219
|
Re: Best DOM supplier in houston Texas
Have you tried Triple S steel. They have two Houston area locations with one on the north side and one on the south side by Hobby airport. It is on the road that runs along the air port just east of the airport between hobby and I-45. There is also a steel place you can try on telephone road (Hwy 35) just south of Hobby airport, north of the beltway. Sorry don't know the name of it but it is on the left when going northbound from the beltway. Just a couple of places to try that are local.
|
05-15-2009, 12:51 PM | #5 |
Registered User
Join Date: Apr 2008
Location: Houston, TX
Posts: 247
|
Re: Best DOM supplier in houston Texas
triple steel is on Monroe by hobby airport...
__________________
1971 C-10 SWB - LS swap w/4L60e, 20x8.5front 20x12rear, 1968 C-10 SWB - 454 BB TH350 -Gone! |
05-17-2009, 10:35 AM | #6 |
Registered User
Join Date: Apr 2008
Location: Sugarland,Tejas
Posts: 356
|
Re: Best DOM supplier in houston Texas
Ya that is steel supply..... I called tripple S steel they don't carry 1.5 1/4 wall DOM. I am gonna try to look for 1 1/4 .120 wall DOM.
__________________
Adam M STX Designs Motorcycles | Choppers | Hotrods |
05-17-2009, 02:43 PM | #7 |
Registered User
Join Date: Apr 2008
Location: Angleton, TX
Posts: 2,219
|
Re: Best DOM supplier in houston Texas
Sorry. Those are the only places that I know of. Good luck finding it.
|
05-17-2009, 06:51 PM | #8 |
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: Best DOM supplier in houston Texas
have you checked speedway motors? they sell cut to fit bars for making 4links and panhard bars
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|