![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Mar 2008
Location: Ann Arbor, MI
Posts: 61
|
HEI... 50k V vs 65k V...?'s
So, after going to ebay and looking at HEI's available.. I am not sure if I should go with the 65,000V or the 50,000V? My truck just acred the points, so I will be replacing asap. it is a 1972 c10 lwb......350 w/ th400 3.08 gears stock original motor... I will be doing some pulling of boats and motorcycles if it makes a difference, but otherwise i drive fairly slow. Give input wither way... Is there a plug gap difference? Anything I should know.....
Thanks, ~Zach |
![]() |
![]() |
![]() |
#2 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: HEI... 50k V vs 65k V...?'s
no need to get the 65K unit. The 55K will do fine, and you would never notice one from the other on a stock engine.
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Mar 2008
Location: Ann Arbor, MI
Posts: 61
|
Re: HEI... 50k V vs 65k V...?'s
So the 65k is for engines with more aggressive cam/timing (more power) that need a really strong spark? What is the line for needing to switch? Any disadvantages to running the 65k just in case someone decides to 'eventually' build their engine up?
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Mar 2008
Location: Ann Arbor, MI
Posts: 61
|
Re: HEI... 50k V vs 65k V...?'s
Also, if you buy a rebuilt one from NAPA or similar store, what is the voltage of those new/ rebuilt (OEM replacement) units? Were they very different based upon application?...ie corvette vs cargo van etc.
I am asking for my understanding and for others as a reference that are somewhat new/ignorant to older style ignition systems and upgrading them. Thanks. ~Zach |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|