|
05-25-2009, 05:58 PM
|
#1 |
|
The Beach Cruiser
Join Date: May 2009
Location: Panama City, Florida
Posts: 358
|
1966 Panel 250 6cyl
Hello to All!
Two Questions: 1. Is it possible to install power steering to a 6cyl. The alt. sits on the front driver side of the engine. 2: Is it possible to install an AC unit to the same motor. Thanks to any and all who reply Last edited by Byronic; 05-25-2009 at 05:59 PM. Reason: typo |
|
|
|
05-25-2009, 06:30 PM
|
#2 |
|
Junior Member
Join Date: Dec 2006
Location: Newburgh, IN
Posts: 1,247
|
Re: 1966 Panel 250 6cyl
I can say yes to the power steering as I have it on my 250....I suspect a/c is easy to add as well.
__________________
1966 Chevy C10 Longbed I'm Bob....ol Curt was my Grandpa The truck was his and he sure as heck wouldn't understand why I took a perfectly good truck and tore it down! 
|
|
|
|
|
05-25-2009, 07:17 PM
|
#3 |
|
Shlong Bed Club
Join Date: Apr 2009
Location: Milford, VA
Posts: 220
|
Re: 1966 Panel 250 6cyl
i had a nova once with power steering, a/c, and power brakes all on the 250. and the car came that way. so yes, it can be done. the biggest hang-up is locating brackets. the a/c brackets shouldnt be hard to find in a junkyard. almost any GM truck or car with a 6cyl would be a good donor. i believe even the '75-up integral head sixes' brackets will work (for a/c that is). the power steering brackets will work too with some modification to the upper mount; at the intake.
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
