Need help with non tilt column 71 1/2 ton - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JP2120 · 06-17-2009, 10:48 PM

I have my non tilt column apart to refinish it and have a question about the bushing in the mast. One of my guys took it apart for me and I have a steel washer which I believe goes in the mast first and there is supposed to be a bushing sitting on top of that washer or seat. I have a rubber bushing that I believe goes there because the bowl has a place on the bottom that fits into the rubber bushing. Then the shifter housing goes on and there is a plastic washer looking piece that fits into the bowl (I think) and that is all I have. Is there another rubber bushing that fits inside this plastic piece. I have an exploded view of the non tilt column I got from this site but the pic is to small to make out the part very well. Any help would be great ! Any pics of these parts would be good too !
Thanks
JP

scoyote · 06-17-2009, 11:06 PM

This might help

http://www.lmctruck.com/icatalog/cb/t.aspx?Page=136

JP2120 · 06-17-2009, 11:11 PM

Quote:

Originally Posted by scoyote

This might help

http://www.lmctruck.com/icatalog/cb/t.aspx?Page=136

Thanks. I have the catalog and the pics a very vague on these parts. I think I am going to have to locate a factory assembly manual. Thanks though.
JP

JP2120 · 06-17-2009, 11:56 PM

Ok I found the problem. I am missing the plastic washer with the tab that goes in the mast on top of the steel washer seat.
Gonna try to find one tomorrow.
JP

06-17-2009, 10:48 PM	#1
JP2120 Registered User Join Date: Jun 2009 Location: kyle, texas Posts: 49	Need help with non tilt column 71 1/2 ton I have my non tilt column apart to refinish it and have a question about the bushing in the mast. One of my guys took it apart for me and I have a steel washer which I believe goes in the mast first and there is supposed to be a bushing sitting on top of that washer or seat. I have a rubber bushing that I believe goes there because the bowl has a place on the bottom that fits into the rubber bushing. Then the shifter housing goes on and there is a plastic washer looking piece that fits into the bowl (I think) and that is all I have. Is there another rubber bushing that fits inside this plastic piece. I have an exploded view of the non tilt column I got from this site but the pic is to small to make out the part very well. Any help would be great ! Any pics of these parts would be good too ! Thanks JP

06-17-2009, 11:06 PM	#2
scoyote Registered User Join Date: Oct 2008 Location: On the shores of Bull Shoals, AR Posts: 509	Re: Need help with non tilt column 71 1/2 ton This might help http://www.lmctruck.com/icatalog/cb/t.aspx?Page=136 __________________ 1972 Blazer - Bronco Orange - In the werks http://67-72chevytrucks.com/vboard/s...d.php?t=323444 1991 F250 - Hunting truck w/ Detroit rear locker, ARB front locker, front and rear winches .... and more.... 1997 Grand Cherokee - fun jeep - Detroit rear locker, ARB front locker, front winch, 411 gears, lots of lights ;-) 2004 Hot Rod DuraMax - Dnyo'd at the wheels with 525 HP and 1100 lbs torque.....mustang killer.

06-17-2009, 11:56 PM	#4
JP2120 Registered User Join Date: Jun 2009 Location: kyle, texas Posts: 49	Re: Need help with non tilt column 71 1/2 ton Ok I found the problem. I am missing the plastic washer with the tab that goes in the mast on top of the steel washer seat. Gonna try to find one tomorrow. JP Last edited by JP2120; 06-17-2009 at 11:57 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.