The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-16-2009, 08:49 PM   #1
Power Performance
Registered User
 
Join Date: Sep 2008
Location: Las Vegas, NV
Posts: 8
Power Performance Motorsports Ball Joints and Steering Linkage for 67-72 Trucks!

Hi everyone,

I posted this over in the Suspension section but figured a lot of you don't make it over there.

We are glad to be new vendors on the forum! Power Performance Motorsports has a line of 1700 EXTREME DUTY ball joints, idler arms, pitman arms, tie rod ends, rack ends center links, and adjusting sleeves. We carry a full line of steering linkage and ball joints for 1/2 ton, 3/4 ton, and 1 ton Chevy/GMC trucks. Our website is undergoing development, so most of our parts are listed by a MOOG reference # - if you have another vehicle that you need parts for, shoot us a PM or email and we'll look it up for you. We have parts for almost every car and truck.

PPM's EXTREME DUTY ball joints feature forged SAE1045 steel housings vs. competitors stamped steel, yielding a 60% stronger part on average. Ball studs are a heat treated, SAE4140 steel for omnidirectional strength. Many of our ball joints have an extra 1-2 degrees of travel for improved operation on lowered vehicles, and most have a ring-retained, accordion-style CR rubber boot. This prevents the boot from coming off, a common problem that results in premature failure. Many of the lower ball joints have a knurled, press fit diameter to grip both fresh and worn control arms.

Our line of steering linkage features improved bearing and boot designs for better strength and wear characteristics.

We are so confident in our parts that we back each one by a 1,000,000 mile warranty against manufacturing defects.

Best of all, we are very price competitive - you will almost always find that we are the cheapest source. Instead of 5 levels of distribution (each with their own markup!), a fleet of private jets, and big corporate expense accounts, we spend our money on top quality materials to produce the best possible part for a reasonable price.

We supply ***************** with all of their ball joints - so any of you who buy their control arms are already getting our top quality ball joints. Our ball joints are also used in the SSC Ultimate Aero (www.shelbysupercars.com), currently the Guinness World Record holder for World's Fastest Production Car at 256.15 MPH (tested on a public road!).

All of our Chevy and GMC 1/2 ton, 3/4 ton, and 1 ton parts can be found here:

http://www.powerperformancemotorspor...?categoryId=25

Here are some pictures of the parts we offer for the 67-72 trucks (see website for all pictures):

63-70 Chevy 1/2 Ton EXTREME DUTY Upper Ball Joint



71-72 Chevy 1/2 Ton EXTREME DUTY Upper Ball Joint



63-70 Chevy 1/2 Ton EXTREME DUTY Lower Ball Joint



71-86 Chevy 1/2 Ton EXTREME DUTY Lower Ball Joint (note the knurling to accommodate worn control arms)



71-86 Chevy 1 Ton EXTREME DUTY Upper Ball Joint



67-82 Chevy Truck EXTREME DUTY Idler Arm



Thanks for reading our introduction! Please contact us if you have any questions.
__________________
Power Performance Motorsports
EXTREME DUTY Ball Joints, Idler Arms, Pitman Arms, Tie Rod Ends, and Center Links
www.PowerPerformanceMotorsports.com
sales@powerperformancemotorsports.com
702.966.0710

Last edited by Power Performance; 01-16-2009 at 08:50 PM.
Power Performance is offline   Reply With Quote
Old 01-16-2009, 09:32 PM   #2
70cst
Senior Member
 
70cst's Avatar
 
Join Date: Feb 2001
Location: New Madison, Ohio
Posts: 21,373
Re: Power Performance Motorsports Ball Joints and Steering Linkage for 67-72 Trucks!

Power Performance Motorsports to your new your new internet family. Looks like you have some quality products and I am sure you will generate business from this forum. Possibly from me.
__________________
A husband can be right...or...A husband can be happy.

67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk.

1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc

JOHN 17:3...The better side of "LIFE"


Remember: Everyday is a good day...Some are just gooder!

Last edited by 70cst; 01-16-2009 at 09:32 PM.
70cst is offline   Reply With Quote
Old 01-16-2009, 11:33 PM   #3
too much stuff
Roadtrip!
 
too much stuff's Avatar
 
Join Date: Feb 2003
Location: Grand Rapids MN
Posts: 13,787
Re: Power Performance Motorsports Ball Joints and Steering Linkage for 67-72 Trucks!

Welcom from the frozen north!
__________________
67 gmc custom lwb dakota truck. Sold...And bought back
69 swb 4x4 project (in progress)
70 c-10 lwb texas truck
70 4x4/BB/bkts/posi/tach(retired)
70 swb (wifes)
70 jimmy camper
71 K-5 factory 2wd
71 cheyenne 4x4/tach/posi/ plow rig
71 Cheyenne20 BB, buckets, tach, tilt, 4 speed
72 jimmy CST wyoming rig
72 jimmy Colorado rig
72 lifted texas 4x4 3/4 ton burb
65 fury conv. 383/auto
65 chrysler 300 "L" 413 auto
too much stuff is offline   Reply With Quote
Old 01-16-2009, 11:55 PM   #4
big_al_71
Registered User
 
big_al_71's Avatar
 
Join Date: Jun 2008
Location: South Florida
Posts: 11,375
Re: Power Performance Motorsports Ball Joints and Steering Linkage for 67-72 Trucks!

from Miami!!!!!

will definetly sell some stuff in here....lots of very demanding customers but very loyal....
__________________
Get your facts first, and then you can distort them as much as you please!!!!!.



Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild
big_al_71 is offline   Reply With Quote
Old 06-18-2009, 11:43 AM   #5
m6z
Registered User
 
m6z's Avatar
 
Join Date: Aug 2008
Location: Pittsburg, KS
Posts: 2,466
Re: Power Performance Motorsports Ball Joints and Steering Linkage for 67-72 Trucks!

Has anyone bought anything from these guys? How quick were they to ship?
__________________
Doug

Looking for a 67-72 short bed driver.....
m6z is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:44 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com