What Transfer Case will fit the 700 Tranny? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

toomanytoyz · 01-17-2009, 08:24 PM

As stated in Thread Title i need to know what Transfer Case will work with the Over drive Tranny, I Have one & would like to use it in Willys Truck that Im Building...............

Thanks, Rick

1-tonmudder · 01-17-2009, 08:30 PM

It will have to be 27 spline to match the 700's out put shaft.So you'll need either a NP 205 or a 208.The 208 will be a direct bolt on with the factory adapter.The 205 requires a spacer along with the factory adapter.

shakedown96 · 01-18-2009, 05:16 AM

27 spline input cases were found behind th350 trannys. 208 is a chain drive 2hi 4hi n 4lo. the 205 is gear to gear same shift as the 208. it is typical for off road shops to remove (out of the 205) the 27 spline and put in the 32 spline intrenal type converting it to the style that was behind the th400 tranny. popular for doublers and nv4500 conversions. there should be shafts around if you find a 205 case and it has a 10 spline your not out of luck. the bearing is the same for 27 and 10 spline.

**special-K** · 01-18-2009, 10:03 AM

The 208 is what they were coupled with from factory.Later,in front of 241s.

skchevota · 01-21-2009, 10:09 PM

I would go for a 241 over a 208 if you have the choise, the 241 has a lot stronger case, the 208s were known to crack.

vtblazer · 01-22-2009, 07:20 PM

Quote:

Originally Posted by skchevota

I would go for a 241 over a 208 if you have the choise, the 241 has a lot stronger case, the 208s were known to crack.

Ditto, run a 241.

Great 1st gear too. (2.72:1)

**special-K** · 01-23-2009, 06:44 AM

Yeah,and they bolt-up.

vtblazer · 01-23-2009, 06:55 AM

Quote:

Originally Posted by special-K

Yeah,and they bolt-up.

even better.

toomanytoyz · 06-05-2009, 11:42 PM

Quote:

Originally Posted by 1-tonmudder

It will have to be 27 spline to match the 700's out put shaft.So you'll need either a NP 205 or a 208.The 208 will be a direct bolt on with the factory adapter.The 205 requires a spacer along with the factory adapter.

Where could i find the Spacer & Adaptor you are Referring to?

I Have 2 Different 205's , One with the 4 Speed & one with auto?

Thanks, Rick

bkiller · 06-18-2009, 08:33 AM

advance adapters has a 700 r out put shaft that will work with a 4 speed 205

Gene · 06-18-2009, 04:52 PM

Any idea what transfer case will fit a chevy truck 5 speed?

01-17-2009, 08:24 PM	#1
toomanytoyz Luv the Crewcabs Join Date: Aug 2006 Location: Andrews, In. 46702 Posts: 4,097	What Transfer Case will fit the 700 Tranny? As stated in Thread Title i need to know what Transfer Case will work with the Over drive Tranny, I Have one & would like to use it in Willys Truck that Im Building............... Thanks, Rick __________________ 55 Nomad 52 Willys Truck 67 Stepper 67 Fleet 68 Wrecker 68 Suburban 76 Crewcab 79 Gmc Dumptruck 84 Blazer 86 Crewcab Stepside 87 Iroc 89 GMC Plow Truck 91 Camaro Vert 96 Z71 Stepsde

01-17-2009, 08:30 PM	#2
1-tonmudder Modern day Fred Sanford Join Date: Oct 2005 Location: Greeneville,TN Posts: 330	Re: What Transfer Case will fit the 700 Tranny? It will have to be 27 spline to match the 700's out put shaft.So you'll need either a NP 205 or a 208.The 208 will be a direct bolt on with the factory adapter.The 205 requires a spacer along with the factory adapter.

01-18-2009, 05:16 AM	#3
shakedown96 Registered User Join Date: Jan 2009 Location: gilboa ny Posts: 91	Re: What Transfer Case will fit the 700 Tranny? 27 spline input cases were found behind th350 trannys. 208 is a chain drive 2hi 4hi n 4lo. the 205 is gear to gear same shift as the 208. it is typical for off road shops to remove (out of the 205) the 27 spline and put in the 32 spline intrenal type converting it to the style that was behind the th400 tranny. popular for doublers and nv4500 conversions. there should be shafts around if you find a 205 case and it has a 10 spline your not out of luck. the bearing is the same for 27 and 10 spline.

01-18-2009, 10:03 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: What Transfer Case will fit the 700 Tranny? The 208 is what they were coupled with from factory.Later,in front of 241s. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-21-2009, 10:09 PM	#5
skchevota Registered User Join Date: Oct 2006 Location: Evans, Colorado Posts: 530	Re: What Transfer Case will fit the 700 Tranny? I would go for a 241 over a 208 if you have the choise, the 241 has a lot stronger case, the 208s were known to crack.

01-23-2009, 06:44 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: What Transfer Case will fit the 700 Tranny? Yeah,and they bolt-up. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-18-2009, 08:33 AM	#10
bkiller Registered User Join Date: Apr 2009 Location: nw arkansas Posts: 27	Re: What Transfer Case will fit the 700 Tranny? advance adapters has a 700 r out put shaft that will work with a 4 speed 205

06-18-2009, 04:52 PM	#11
Gene Registered User Join Date: Aug 2002 Location: Muskogee, Oklahoma Posts: 2,914	Re: What Transfer Case will fit the 700 Tranny? Any idea what transfer case will fit a chevy truck 5 speed?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.