The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-18-2009, 08:38 PM   #1
79gmcc15
Gettin It One Pice At A Time
 
79gmcc15's Avatar
 
Join Date: Oct 2004
Location: everett, washington
Posts: 2,688
I am lost, I need help.

OK, a few days ago I was working on a Jerry rigged electrical work I did to a plug on my wiper motor. I used some good wire and couplings. I took my time and made all the connections tight. I went it to make sure the wipers worked and they didn't so I got to looking at the fuses and everything looked good. no breaks or melting. so I though that maybe I screwed up on my fix. so I cut it all up and Jerry rigged it just like I had it before. Still Nothing! so I went out and got a multi-meter and I checked to see if I was even getting volts to the wires at the plug. No suck luck. I tried it every which way I could think of. wiper switch on, off,and wash mode. I tried having the leads on both wires and both ways and tried having the ground, grounded to the frame. Nothing! so I thought, maybe its the switch! so I got it out and I had the ground, grounded to the dash. went to every connector and got nothing! I tried it with the ground on the black wire, nothing. tried it with the plugs on the switch and switch on. Nothing! So, NOW WHAT!!!! LOL the meter does work, battery is good and grounded good. I had it on the 12 volt setting. and the wipers worked before this started. I did have a question sort of like this in the electrical board. and didn't have many takers. thanks!

The plug on the left is the one I was working on.



Here is the switch.

__________________
RIP ELJAY

Work In Progress 1979 GMC C1500 Trailering Special.
Getting the truck done, one piece at a time.

“You can tell a lot about a fellow’s character by his way of eating jellybeans.”Ronald Reagan

“I don’t know the key to success but I know the key to failure is trying to please everybody.” Bill Cosby

Last edited by 79gmcc15; 06-18-2009 at 08:39 PM.
79gmcc15 is offline   Reply With Quote
Old 06-18-2009, 10:07 PM   #2
babyJay
Arrived on a Pale Horse
 
babyJay's Avatar
 
Join Date: Mar 2007
Location: SnagTown Indiana
Posts: 2,524
Re: I am lost, I need help.

Was the key turned to the on position (forward)?
__________________
Jason
87 V30 350TBI/400 White w/Boss V-plow
89 R3500 CC SRW
babyJay is offline   Reply With Quote
Old 06-18-2009, 10:34 PM   #3
79gmcc15
Gettin It One Pice At A Time
 
79gmcc15's Avatar
 
Join Date: Oct 2004
Location: everett, washington
Posts: 2,688
Re: I am lost, I need help.

Quote:
Originally Posted by babyJay View Post
Was the key turned to the on position (forward)?
yes
__________________
RIP ELJAY

Work In Progress 1979 GMC C1500 Trailering Special.
Getting the truck done, one piece at a time.

“You can tell a lot about a fellow’s character by his way of eating jellybeans.”Ronald Reagan

“I don’t know the key to success but I know the key to failure is trying to please everybody.” Bill Cosby
79gmcc15 is offline   Reply With Quote
Old 06-18-2009, 11:37 PM   #4
JET4x4
Registered User
 
Join Date: Jun 2009
Location: Birdsboro, Pa
Posts: 135
Re: I am lost, I need help.

Do you have power at the fuse?
__________________
67 Chevy K20 LWB Fleetside project
85 GMC K10 High Sierra LWB, 37's, 8 lug rears, 4.10's project
86 m1009 blazer, 6 in lift, 35's, driver
69 c10, 307, long bed, 3 speed, driver
07 Dodge 2500, cc, lb, cummins turbo diesel
00 z28 camaro, ls1, 6 speed, rarely leaves the garage
JET4x4 is offline   Reply With Quote
Old 06-19-2009, 01:10 AM   #5
79gmcc15
Gettin It One Pice At A Time
 
79gmcc15's Avatar
 
Join Date: Oct 2004
Location: everett, washington
Posts: 2,688
Re: I am lost, I need help.

well, here is problem number 2 most of the names on the fuse block is gone. so I don't know which one it is. I pulled all the fuses out and they were good.
__________________
RIP ELJAY

Work In Progress 1979 GMC C1500 Trailering Special.
Getting the truck done, one piece at a time.

“You can tell a lot about a fellow’s character by his way of eating jellybeans.”Ronald Reagan

“I don’t know the key to success but I know the key to failure is trying to please everybody.” Bill Cosby
79gmcc15 is offline   Reply With Quote
Old 06-19-2009, 05:14 PM   #6
79gmcc15
Gettin It One Pice At A Time
 
79gmcc15's Avatar
 
Join Date: Oct 2004
Location: everett, washington
Posts: 2,688
Re: I am lost, I need help.

problem solved! I found a pic of a fuse box with labels and found out the fuse holder for the wipers.... well......didn't have...a fuse!
__________________
RIP ELJAY

Work In Progress 1979 GMC C1500 Trailering Special.
Getting the truck done, one piece at a time.

“You can tell a lot about a fellow’s character by his way of eating jellybeans.”Ronald Reagan

“I don’t know the key to success but I know the key to failure is trying to please everybody.” Bill Cosby
79gmcc15 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:57 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com